similar to: ZFS configuration suggestion with 24 drives

I have some questions about the choice of SSDs to use for ZIL and L2ARC. I''m trying to build an OpenSolaris iSCSI SAN out of a whitebox system, which is intended to be used as a backup SAN during storage migration, so it''s built on a tight budget. The system currently has 4GB RAM, 3GHz Core2-Quad and 8x 500GB WD REII SATA HDDs attached to an Areca 8port ARC-1220 controller

Well, I''ve searched my brains out and I can''t seem to find a reason for this. I''m getting bad to medium performance with my new test storage device. I''ve got 24 1.5T disks with 2 SSDs configured as a zil log device. I''m using the Areca raid controller, the driver being arcmsr. Quad core AMD with 16 gig of RAM OpenSolaris upgraded to snv_134. The zpool

We are looking into the possibility of adding a dedicated ZIL and/or L2ARC devices to our pool. We are looking into getting 4 ? 32GB Intel X25-E SSD drives. Would this be a good solution to slow write speeds? We are currently sharing out different slices of the pool to windows servers using comstar and fibrechannel. We are currently getting around 300MB/sec performance with 70-100% disk busy.

Hi all I have a test system with snv134 and 8x2TB drives in RAIDz2 and currently no Zil or L2ARC. I noticed the I/O speed to NFS shares on the testpool drops to something hardly usable while scrubbing the pool. How can I address this? Will adding Zil or L2ARC help? Is it possible to tune down scrub''s priority somehow? Best regards roy -- Roy Sigurd Karlsbakk (+47) 97542685 roy at

Hi, for zfs raidz1, I know for random io, iops of a raidz1 vdev eqaul to one physical disk iops, since raidz1 is like raid5 , so is raid5 has same performance like raidz1? ie. random iops equal to one physical disk''s ipos. Regards Victor -- This message posted from opensolaris.org

I have been searching this forum and just about every ZFS document i can find trying to find the answer to my questions. But i believe the answer i am looking for is not going to be documented and is probably best learned from experience. This is my first time playing around with open solaris and ZFS. I am in the midst of replacing my home based filed server. This server hosts all of my media

Ok, previous threads have lead me to believe that I want to make raidz vdevs [0] either 3, 5 or 9 disks in size [1]. Let''s say I have 8 disks. Do I want to create a zfs pool with a 5-disk vdev and a 3-disk vdev? Are there performance issues with mixing differently sized raidz vdevs in a pool? If there *is* a performance hit to mix like that, would it be greater or lesser than building

I currently have a 7x1.5tb raidz1. I want to add "phase 2" which is another 7x1.5tb raidz1 Can I add the second phase to the first phase and basically have two raid5''s striped (in raid terms?) Yes, I probably should upgrade the zpool format too. Currently running snv_104. Also should upgrade to 110. If that is possible, would anyone happen to have the simple command lines to

I''m looking to move our file storage from Windows to Opensolaris/zfs. The windows box will be connected through 10g for iscsi to the storage. The windows box will continue to serve the windows clients and will be hosting approximately 4TB of data. The physical box is a sunfire x4240, single AMD 2435 processor, 16G ram, LSI 3801E HBA, ixgbe 10g card. I''m looking for suggestions

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

apt-get update apt-clone upgrade Any first impressions? -- Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org ______________________________________________________________ ICBM: 48.07100, 11.36820 http://www.ativel.com http://postbiota.org 8B29F6BE: 099D 78BA 2FD3 B014 B08A 7779 75B0 2443 8B29 F6BE

I?ve spend a few hours reading through the forums and wiki and honestly my head is spinning. I have been trying to study up on either buying or building a box that would allow me to add drives of varying sizes/speeds/brands (adding more later etc) and still be able to use the full space of drives (minus parity? [not sure if I got the terminology right]) with redundancy. I have found the ?all in

Hi list, My zfs write performance is poor and need your help. I create zpool with 2 raidz1. When the space is to be used up, I add 2 another raidz1 to extend the zpool. After some days, the zpool is almost full, I remove some old data. But now, as show below, the first 2 raidz1 vdev usage is about 78% and the last 2 raidz1 vdev usage is about 93%. I have line in /etc/system set

I''m playing around with ZFS and want to figure out the best use of my 6x 300GB SATA drives. The purpose of the drives is to store all of my data at home (video, photos, music, etc). I''m debating between: 6x 300GB disks in a single raidz2 pool --or-- 2x (3x 300GB disks in a pool) mirrored I''ve read up a lot on ZFS, but I can''t really figure out which is

Hi all, just after sending a message to sunmanagers I realized that my question should rather have gone here. So sunmanagers please excus ethe double post: I have inherited a X4140 (8 SAS slots) and have just setup the system with Solaris 10 09. I first setup the system on a mirrored pool over the first two disks pool: rpool state: ONLINE scrub: none requested config: NAME

Hi, Out of pure curiosity, I was wondering, what would happen if one tries to use a regular 7200RPM (or 10K) drive as slog or L2ARC (or both)? I know these are designed with SSDs in mind, and I know it''s possible to use anything you want as cache. So would ZFS benefit from it? Would it be the same? Would it slow down? I guess it would slow things down, because it would be trying to

Hello everyone, I''m wondering if the following makes sense: To configure a system for high IOPS, I want to have a zpool of 15K RPM SAS drives. For high IOPS, I believe it is best to let ZFS stripe them, instead of doing a raidz1 across them. Therefore, I would like to mirror the drives for reliability. Now, I''m wondering if I can get away with using a large capacity 7200

Hello, I have a Dell 2950 with a Perc 5/i, two 300GB 15K SAS drives in a RAID0 array. I am considering going to ZFS and I would like to get some feedback about which situation would yield the highest performance: using the Perc 5/i to provide a hardware RAID0 that is presented as a single volume to OpenSolaris, or using the drives separately and creating the RAID0 with OpenSolaris and ZFS? Or

Hello, I was hoping that this would work: http://blogs.sun.com/zhangfan/entry/how_to_turn_a_mirror I have 4x(1TB) disks, one of which is filled with 800GB of data (that I cant delete/backup somewhere else) > root at FSK-Backup:~# zpool create -f ambry raidz1 c4t0d0 c5t0d0 c5t1d0 > /dev/lofi/1 > root at FSK-Backup:~# zpool list > NAME SIZE USED AVAIL CAP HEALTH ALTROOT

So, I took four 1.5TB drives and made RAIDZ, RAIDZ1 and RAIDZ2 pools. The sizes for the pools were 5.3TB, 4.0TB, and 2.67TB respectively. The man page for RAIDZ states that "The raidz vdev type is an alias for raidz1." So why was there a difference between the sizes for RAIDZ and RAIDZ1? Shouldn''t the size be the same for "zpool create raidz ..." and "zpool