similar to: Root Mirror - Permission Denied

OK, I''ve got a proble I can''t solve by myself. I''ve installed solaris 11 using just one drive. Now I want to create a mirror by attached a second one tot the rpool. However, the first one has NO partition 9 but the second one does. This way the sizes differ if I create a partiotion 0 (needed because it''s a boot disk).. How can I get the second disk look

hello, all I am have constraint disk space (only 8GB) while running os inside vm. Now i want to add more. It is easy to add for vm but how can i update fs in os? I cannot use autoexpand because it doesn''t implemented in my system: $ uname -a SunOS sopen 5.11 snv_111b i86pc i386 i86pc If it was 171 it would be grate, right? Doing following: o added new virtual HDD (it becomes

Hi all One of the rpool drives on this server died the other day, so I got a replacement that was 1 cylinder larger (60798 vs 60797). Still, I tried prtvtoc /dev/rdsk/c7d0s2 | fmthard -s - /dev/rdsk/c6d0s2 zpool replace worked and the pool resilvered within a few minutes. Now, installing grub fails. root at prv-backup:~# installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c6d0s0

In my new oracle server, sol11exp, it''s using multipath device names... Presently I have two disks attached: (I removed the other 10 disks for now, because these device names are so confusing. This way I can focus on *just* the OS disks.) 0. c0t5000C5003424396Bd0 <SEAGATE-ST32000SSSUN2.0-0514 cyl 3260 alt 2 hd 255 sec 252> /scsi_vhci/disk at g5000c5003424396b

Hi All, I had a slice with zfs file system which I want to mirror, I followed the procedure mentioned in the amin guide I am getting this error. Can you tell me what I did wrong? root # zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT export 254G 230K 254G 0% ONLINE - root # echo |format Searching for disks...done

On Solaris 10 If I install using ZFS root on only one drive is there a way to add another drive as a mirror later? Sorry if this was discussed already. I searched the archives and couldn''t find the answer. Thank you.

hi all, i would like to ask some questions regarding best practices for zfs recovery if disk errors occur. currently i have zfs boot (nv62) and the following setup: 2 si3224 controllers (each 4 sata disks) 8 sata disks, same size, same type i have two pools: a) rootpool b) datapool the rootpool is a mirrored pool, where every disk has a slice (the s0, which is 5 % of the whole disk) and this

This seems like a bit of a restriction ... is this intended ? # cat /etc/release Solaris Express Community Edition snv_125 SPARC Copyright 2009 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 05 October 2009 # uname -a SunOS neptune 5.11 snv_125 sun4u sparc SUNW,Sun-Fire-880 #

Hi, After upgrading to b95 of OSOL/Indiana, and doing a ZFS upgrade to the newer revision, all arrays I have using ZFS mirroring are displaying errors. This started happening immediately after ZFS upgrades. Here is an example: ormandj at neutron.corenode.com:~$ zpool status pool: rpool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was

Hi, I''m running FreeBSD 7.1-PRERELEASE with a 500-gig ZFS drive. Recently I''ve encountered a FreeBSD problem (PR kern/128083) and decided about updating the motherboard BIOS. It looked like the update went right but after that I was shocked to see my ZFS destroyed! Rolling the BIOS back did not help. Now it looks like that: # zpool status pool: tank state: UNAVAIL status:

Hello everyone, As one of the steps of improving my ZFS home fileserver (snv_134) I wanted to replace a 1TB disk with a newer one of the same vendor/model/size because this new one has 64MB cache vs. 16MB in the previous one. The removed disk will be use for backups, so I thought it''s better off to have a 64MB cache disk in the on-line pool than in the backup set sitting off-line all

(for some reason I cannot find my original thread..so I''m reposting it) I am trying to move my data off of a 40gb 3.5" drive to a 40gb 2.5" drive. This is in a Netra running Solaris 10. Originally what I did was: zpool attach -f rpool c0t0d0 c0t2d0. Then I did an installboot on c0t2d0s0. Didnt work. I was not able to boot from my second drive (c0t2d0). I cannot remember

Well this is a new one.... Illumos/Openindiana let me add a device as a hot spare that evidently has a different sector alignment than all of the other drives in the array. So now I''m at the point that I /need/ a hot spare and it doesn''t look like I have it. And, worse, the other spares I have are all the same model as said hot spare. Is there anything I can do with this or

I guess I didn't want to litter the users table either - it just seems "wrong" to be actually adding things to the host when it is really so transient. It feels like it should be LDAP-ish. Just ask the server for the keys and do a one-off authentication. But I've seen even LDAP creates the user directories. I see that 2.6 kernels can have some 4B users, which should last me a

I''m looking for a way to backup my entire system, the rpool zfs pool to an external HDD so that it can be recovered in full if the internal HDD fails. Previously with Solaris 10 using UFS I would use ufsdump and ufsrestore, which worked so well, I was very confident with it. Now ZFS doesn''t have an exact replacement of this so I need to find a best practice to replace it.

Hi all, I installed another OpenSolaris (snv_129) in VirtualBox 3.1.0 on Windows because snv_130 doesn''t boot anymore after installation of VirtualBox guest additions. Older builds before snv_129 were running fine too. I like some features of this OS, but now I end with something funny. I installed default snv_129, installed guest additions -> reboot, set

Hi, We have a number of 4200''s setup using a combination of an SVM 4 way mirror and a ZFS raidz stripe. Each disk (of 4) is divided up like this / 6GB UFS s0 Swap 8GB s1 /var 6GB UFS s3 Metadb 50MB UFS s4 /data 48GB ZFS s5 For SVM we do a 4 way mirror on /,swap, and /var So we have 3 SVM mirrors d0=root (sub mirrors d10, d20, d30, d40) d1=swap (sub mirrors d11, d21,d31,d41)

I''m running a ubuntu 9.04 64 bit dom0 with kernel 2.6.29.6 and xen 3.4.0. My eth0 is bridged to br0 and to my guest VMs. The dom0 is running a dhcp server on br0 which is able to provide leases to physical machines on eth0, and also to a windows xp domU which is bridged to br0. However my open solaris 2009.6 domU is unable to obtain a dhcp lease. On the opensolaris side I can see this:

On Fri 2015-02-06 14:30:13 -0500, Cary FitzHugh wrote: > Hence - maybe a NSS User Database extension which looks for the > public keys from a webservice (and then maybe writes them to > /tmp/<username>. No, i'm suggesting that when you want to look up the user, use NSS to find the username and map it to a numeric user ID and the other information that is typically found in

>> However - as I got into that - I realized that I have no way to "find" >> just the keys for a single user. Since the only argument to that ssh >> keys command, is the username. It's not HTTP so I couldn't point at a >> subdomain and use that to look up the information. >You may be interested in the bug report "extend the parameters to the