similar to: Is LSI SAS3081E-R suitable for a ZFS NAS ?

Hi, folks, Got an older Dell R410, with an LSI 1068E PCI-Express Fusion-MPT SAS (rev 08). It *appears* that a) trying MegaRaid, and b) from what I'm googling, that what I need are mptfusion-related packages. Unfortunately, yum shows me nothing available in base, epel, or rpmfusion. Am I looking for the wrong thing, or does anyone have a source (no, I haven't looked at LSI, sorry

Hi All I have xeon server with 16 Gb Ram and no Swap memory.I am running cassandra server on two node in cluster.When there is high load on server kswapd0 kicks inn and take 100% cpu and make machine very slow and we need to restart out cassandra server.I have latest kernel 2.6.18-238.9.1.el5.Please let me know how can i fix this issue .Its hurting us badly this our production server any

Hello, I am new to open solaris and am trying to setup a ZFS based storage solution. I am looking at setting up a system with the following specs: Intel BOXDG33FBC Intel Core 2 Duo 2.66Ghz 2 or 4 GB ram For the drives I am looking at using a LSI SAS3081E-R I''ve been reading around and it sounds like LSI solutions work well in terms of compatability with solaris. Could someone help

Hi, I''m running Opensolaris 2009.06, and I''m facing a serious performance loss with ZFS ! It''s a raidz1 pool, made of 4 x 1TB SATA disks : zfs_raid ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 ONLINE 0 0 0 c7t4d0 ONLINE 0 0

On Wed, Jul 9, 2008 at 1:12 PM, Tim <tim at tcsac.net> wrote: > Perfect. Which means good ol'' supermicro would come through :) WOHOO! > > AOC-USAS-L8i > > http://www.supermicro.com/products/accessories/addon/AOC-USAS-L8i.cfm Is this card new? I''m not finding it at the usual places like Newegg, etc. It looks like the LSI SAS3081E-R, but probably at 1/2 the

Hi, John, John R Pierce wrote: > On 7/12/2016 10:19 AM, m.roth at 5-cent.us wrote: >> Got an older Dell R410, with an LSI 1068E PCI-Express Fusion-MPT SAS >> (rev 08). It*appears* that a) trying MegaRaid, and b) from what I'm >> googling, that what I need are mptfusion-related packages. >> Unfortunately, yum shows me nothing available in base, epel, or >>

Dear All, It may be this not the correct mailing list, but I''m having a ZFS issue when a disk is failing. The system is a supermicro motherboard X8DTH-6F in a 4U chassis (SC847E1-R1400LPB) and an external SAS2 JBOD (SC847E16-RJBOD1). It makes a system with a total of 4 backplanes (2x SAS + 2x SAS2) each of them connected to a 4 different HBA (2x LSI 3081E-R (1068 chip) + 2x LSI

After having massive problems with a supermicro X7DBE box using AOC-SAT2-MV8 Marvell controllers and opensolaris snv79 (same as described here: http://sunsolve.sun.com/search/document.do?assetkey=1-66-233341-1) we just start over using new hardware and opensolaris 2008.05 upgraded to snv94. We used again a supermicro X7DBE but now with two LSI SAS3081E SAS controllers. And guess what? Now we get

I'm trying to install CentOS 5.4 on a machine with a LSI SAS 1068E controller. I've googled all over the place and found a few different drivers for RHEL5 for it.. and tried a few of them.. Some will load, some complain that this isn't the correct version.. non of them work when it comes to showing Hard Drivers in the partition manager. The machine is a Supermicro SYS-6015V-M3

My setup: A SuperMicro 24-drive chassis with Intel dual-processor motherboard, three LSI SAS3081E controllers, and 24 SATA 2TB hard drives, divided into three pools with each pool a single eight-disk RAID-Z2. (Boot is an SSD connected to motherboard SATA.) This morning I got a cheerful email from my monitoring script: "Zchecker has discovered a problem on bigdawg." The full output is

I have an odd setup at present, because I''m testing while still building my machine. It''s an Intel Atom D510 mobo running snv_134 2GB RAM with 2 SATA drives (AHCI): 1: Samsung 250GB old laptop drive 2: WD Green 1.5TB drive (idle3 turned off) Ultimately, it will be a time machine backup for my Mac laptop. So I have installed Netatalk 2.1.1 which is working great. Read

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

Hi, I have a LSI Logic sata/sas raid running, is there a way to see the state of the volume, like optimal, degraded or resyncing? I've tried several commands with camcontrol but I cant figure it out. -- Peter Ankerst?l peter@pean.org http://www.pean.org/

Can anyone tell me if/when the Adaptec AIC9410 SAS/SATA controller will be supported? Michael Grant

Hello, Recently we bought HP bl35 blades with LSI Logic SAS controllers. mpt* drivers works fine but I would like to somehow view status from command line. To monitor e.g. if one of the HDDs failed. I found mptutil on LSI Logic site but it just shows me configuration in quite cryptic form. Thanks, Mindaugas

I've got a box running C7, just updated (yesterday). It had an onboard RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078

Hi, Currently I've been using an RHEL4 Update 4 ia64 AS Linux version and running in HP rx6600 server. I tried to google-out the RAID, temperature and FAN status manage and monitoring tool for RHEL4 Update 4 ia64 AS Linux But i can't able to findout the same for RHEL4 Update 4 ia64 AS Linux server Can anyone suggest me the write status monitoring and manage tool for

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

Hi everybody. I have an HP StorageWorks array connected to one of my servers, connected via an LSI controller (lspci reports: SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)) on an HP DL385 running CentOS 5.5 x86_64. I have set up multipath and all is working but, when I create a snaphost and export it as a new LUN from the HP web interface, it

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about