similar to: ZFS non-zero checksum and permanent error with deleted file

I have a FreeBSD 6.2-based server running a 1.2TB graid3 volume, which consists of 5x 320gb SATA hard drives. I've been getting errors in /var/log/messages from the graid3 volume, which I suspect means an underlying fault with one of the disks, but is there any way to decipher which one of these drives is throwing errors? I've checked smartctl -a /dev/adXX but nothing shows up there..

I've got an Asus P5E3WSPro with 8 SATA ports and 8 disks attached. 6 disks are on one controller (and work perfectly) and 2 are on a second Marvell controller. FreeBSD sees the controller, but not the disks. If I move a working disk to the Marvell controller I can boot off it up to the stage of mounting root where it fails to see the disk. atacontrol shows: ATA channel 2: Master:

Hi, Can anyone explain the following to me? Two zpool devices points at the same data, I was installing osol 2008.11 in xVM when I saw that there already was a partition on the installation disk. An old dataset that I deleted since i gave it a slightly different name than I intended is not removed under /dev. I should not have used that name, but two device links should perhaps not

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

Hello, I mentioned this problem a year ago here and filed 6792701 and I know it has been discussed since. It should have been fixed in snv_118, but I can still trigger the same problem. This is only triggered if the creation of a large file is aborted, for example by loss of power, crash or SIGINT to mkfile(1M). The bug should probably be reopened but I post it here since some people where

I recently had a hard drive die on my 6 drive raidz2 array (4+2). Unfortunately, now that the dead drive didn''t register anymore, Linux decided to rearrange all of the drive names around such that zfs couldn''t figure out what drives went where. After much hair pulling, I gave up on Linux and went to OpenSolaris, but it wouldn''t recognize my SATA controller, so

Hello, Arne. I try to build storage server for my home (I have a LOT of media files) with FreeBSD 7, 5xHDD (WD 500Gb) and geom_raid5 ("simple" version from perforce, beacuse http://home.tiscali.de/cmdr_faako/geom_raid5.tbz is not patched for FreeBSD7). Array & FS were created with default arguments: # graid5 label storage ad6 ad8 ad10 ad12 ad14 # newfs -O2 -U /dev/raid5/storage

Anyone knows if this is something that will be looked at before b134 is released? Bug 13743 - virsh and xm is unable to start domain first time after boot http://defect.opensolaris.org/bz/show_bug.cgi?id=13743 Regards Henrik http://sparcv9.blogspot.com

Hi, I am trying to backup data from a distributed replicated volume. The volume was built from 6 units of 2 TB hard disks: gluster> volume info Volume Name: 6TB-Vol Type: Distributed-Replicate Status: Started Number of Bricks: 3 x 2 = 6 Transport-type: tcp Bricks: Brick1: c107:/exp0 Brick2: c108:/exp0 Brick3: c109:/exp0 Brick4: c110:/exp0 Brick5: c111:/exp0 Brick6: c112:/exp0 Options

Hello List, I'm hoping someone else out there has an Asus DSBF-DE server board, and can tell me if anything special needs to be done to get ports 5 and 6 of the onboard SATA to work under Centos 5.1 x64. I have drives on 1 through 4 that are detected and working properly, however, a drive on 5 is not detected, from what i can tell, the kernel doesn't even see phy's for ports 5 and 6.

Hello, Anyone else noticed that zpool is kind of negative when reporting back from some error conditions? Like: cannot import ''zpool01'': I/O error Destroy and re-create the pool from a backup source. or even worse: cannot import ''rpool'': pool already exists Destroy and re-create the pool from a backup source. The first one i

Hi there colleagues, atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0 atacontrol detach ata7 - insert ATA disk (ad14) atacontrol attach ata7 pinics with Fatal trap 12: page fault while in kernel mode (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc0533227

Hi, I am developing a ruby on rails application for getting all users tweets from twitter after twitter login from my application I am able to get user_id,email,provider,name etc from twitter login but I want to use Twitter Api to get all the tweets of the user who is doing twitter sign in from my application I followed this post "*

I've tested both 6.3 and 7.0-RC2, amd64 architecture, and have found the occurrence of an interrupt storm using an ASUS A8N-SLI Premium (nForce 4) motherboard with an AMD Opteron 175. Relevant dmesg output: atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA

OK, so our old MDS had hardware issues so I configured a new MGS / MDS on a VM (this is a backup lustre filesystem and I wanted to separate the MGS / MDS from OSS of the previous), and then did this: For example: mount -t ldiskfs /dev/old /mnt/ost_old mount -t ldiskfs /dev/new /mnt/ost_new rsync -aSv /mnt/ost_old/ /mnt/ost_new # note trailing slash on ost_old/ If you are unable to connect both

Thanks, Nux!. But a few hours late. I just purchased: http://www.ebay.com/itm/ZOTAC-ZBOX-NANO-Plus-Mini-PC-ZBOXNANO-AD12-PLUS-2GB-320GB-with-Power-Supply-56/382042194064?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D41376%26meid%3Deae770f22d504a9b8366eb0c02dd20d6%26pid%3D100033%26rk%3D7%26rkt%3D8%26sd%3D152356229748 Zotac has been in the mini/nano

Hi I just did a system update and after I've rebooted it doesn't boot up any more. All I'm getting is a blank screen with a curser blinking at the top left corner of the screen. This system was running 7.0-STABLE Any ideas as to how I can get it back up? Regards Reinhold

I am use to low random entropy on my arm boards, not an intel. On my Lenovo x120e, cat /proc/sys/kernel/random/entropy_avail reports 3190 bits of entropy. On my armv7 with Centos7 I would get 130 unless I installed rng-tools and then I get ~1300. SSH into one and it drops back to 30! for a few minutes. Sigh. Anyway on my new Zotac nano ad12 with an AMD E-1800 duo core, I am seeing 180.

On 05/26/2017 08:35 PM, Leon Fauster wrote: >> Am 27.05.2017 um 01:09 schrieb Robert Moskowitz <rgm at htt-consult.com>: >> >> I am use to low random entropy on my arm boards, not an intel. >> >> On my Lenovo x120e, >> >> cat /proc/sys/kernel/random/entropy_avail >> >> reports 3190 bits of entropy. >> >> On my armv7 with

On 17.05.2017 11:58, Robert Moskowitz wrote: > > http://www.ebay.com/itm/ZOTAC-ZBOX-NANO-Plus-Mini-PC-ZBOXNANO-AD12-PLUS-2GB-320GB-with-Power-Supply-56/382042194064?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D41376%26meid%3Deae770f22d504a9b8366eb0c02dd20d6%26pid%3D100033%26rk%3D7%26rkt%3D8%26sd%3D152356229748 > > > I will post power