similar to: Mount ZFS on Dual Boot Machine (open)solaris

This is probably unreproducible, but I just got a panic whilst scrubbing a simple mirrored pool on scxe snv124. Evidently on of the disks went offline for some reason and shortly thereafter the panic happened. I have the dump and the /var/adm/messages containing the trace. Is there any point in submitting a bug report? The panic starts with: Jan 19 13:27:13 host6

Machine is running x86 snv_94 after recent upgrade from opensolaris 2008.05. ZFS and zpool reported no troubles except suggesting upgrade for from ver.10 to ver.11. seemed like a good idea at the time. system up for several days after that point then took down for some unrelated maintenance. now will not boot the opensol, drops to grub prompt, no menus. zfs was mirrored on two disks c6d0s0 and

Hello all, It was often asked and discussed on the list about "how to change rpool HDDs from AHCI to IDE mode" and back, with the modern routine involving reconfiguration of the BIOS, bootup from separate live media, simple import and export of the rpool, and bootup from the rpool. The documented way is to reinstall the OS upon HW changes. Both are inconvenient to say the least.

I''m looking for a way to backup my entire system, the rpool zfs pool to an external HDD so that it can be recovered in full if the internal HDD fails. Previously with Solaris 10 using UFS I would use ufsdump and ufsrestore, which worked so well, I was very confident with it. Now ZFS doesn''t have an exact replacement of this so I need to find a best practice to replace it.

hi folks, is there a straightforward or well-documented way to migrate my physical sxce snv_115 (x64) system into an xvm ? searching for "p2v" in an opensolaris context seems to pick up a few hits on zones, but nothing obvious relating to xvm on opensolaris for what it''s worth the host system is opensolaris (2010.02 snv_126), but i''m hoping that''s not very

With the release of the Nevada build 90 binaries, it is now possible to install SXCE directly onto a ZFS root filesystem, and also put ZFS swap onto a ZFS filesystem without worrying about having it deadlock. ZFS now also supports crash dumps! To install SXCE to a ZFS root, simply use the text-based installer, after choosing "Solaris Express" from the boot menu on the DVD. DVD download

Hi, yesterday evening I tried to upgrade my Ultra 60 to 2009.06 from SXCE snv_98. I can''t use AI Installer because OpenPROM is version 3.27. So I built IPS from source, then created a zpool on a spare drive and installed OS 2006.06 on it To make the disk bootable I used: installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/c0t1d0s0 using the executable from my new

Gurus; I''ve been running Solaris 10 on a HVM domain on my machine (running SXCE snv_93 x86) for some time now. Now that Solaris 10 Update 6 (10/08) has been released, I tried creating a Paravirtualized Guest domain but got the same error message I got previously... # virt-install -n sol10 -p -r 1560 --nographics -f /dev/zvol/dsk/rpool/sol10 -l /stage/sol-10-u6-> Starting

I have one drive that I''m running OpenSolaris on and a 6-drive RAIDZ. Unfortunately I don''t have another drive to mirror the OS drive, so I was wondering what the best way to back up that drive is. Can I mirror it onto a file on the RAIDZ, or will this cause problems before the array is loaded when booting? What about zfs send and recv to the RAIDZ? -- This message posted from

Ciao, the rot filesystem of my thumper is a ZFS with a single disk: bash-3.2# zpool status rpool pool: rpool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c5t0d0s0 ONLINE 0 0 0 spares c0t7d0 AVAIL c1t6d0 AVAIL c1t7d0

I''ve installed SXDE (snv_89) and found that the web console only listens on https://localhost:6789/ now, and the module for ZFS admin doesn''t work. When I open the link, the left frame lists a stacktrace (below) and the right frame is plain empty. Any suggestions? I tried substituting different SUNWzfsgr and SUNWzfsgu packages from older Solarises (x86/sparc, snv_77/84/89,

Under Solaris 10 u6 , No matter how I configured my ARECA 1261ML Raid card I got errors on all drives that result from SCSI timeout errors. yoda:~ # tail -f /var/adm/messages Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Requested Block: 239683776 Error Block: 239683776 Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Vendor: Seagate

I understand that currently, at least under Solaris 10u6, it is not possible to jumpstart a new system with a zfs root using a flash archive as a source. Can anyone comment as to whether this restriction will pass in the near term, or if this is a while out (6+ months) before this will be possible? Thanks, Jerry

I''ve got knee deep into learning how to use Opensolaris and zfs, and I see now that my goal of home zfs server may have been better served if I had partitioned the install disk leaving some of the 60GB to be added to a zpool. First, how much space does a working OS need. I don''t mean bare minimum but to be comfortable and have some growing room (on the install disk)?

1. My earlier patch to fix a typo in array.h was not good enough. Here's one that not only compiles, but also doesn't crash: --- dovecot-2.0.alpha2/src/lib/array.h 2009-10-08 10:04:35.000000000 -0500 +++ dovecot/src/lib/array.h 2009-10-29 20:47:47.000000000 -0500 @@ -72,8 +72,7 @@ (elem)++) # define array_foreach_modifiable(array, elem) \ for (elem =

Zpool split is a wonderful feature and it seems to work well, and the choice of which disk got which name was perfect! But there seems to be an odd anomaly (at least with b132) . Started with c0t1d0s0 running b132 (root pool is called rpool) Attached c0t0d0s0 and waited for it to resilver Rebooted from c0t0d0s0 zpool split rpool spool Rebooted from c0t0d0s0, both rpool and spool were mounted

I have a 5-500GB disk Raid-Z pool that has been producing checksum errors right after upgrading SXCE to build 121. They seem to be randomly occurring on all 5 disks, so it doesn''t look like a disk failure situation. Repeatingly running a scrub on the pools randomly repairs between 20 and a few hundred checksum errors. Since I hadn''t physically touched the machine, it seems a

Hi, I have a small Linux server PC at home (Intel Core2 Q9300, 4 GB RAM), and I''m seriously considering switching to OpenSolaris (Indiana, 2008.11) in the near future, mainly because of ZFS. The idea is to run the existing CentOS 4.7 system inside a VM and let it NFS mount home directories and other filesystems from OpenSolaris. I might migrate more services from Linux over time, but for

Hello, ZFS is behaving strange on a OSOL laptop, your thoughts are welcome. I am running OSOL on my laptop, currently b124 and i found that the performance of ZFS is not optimal in all situations. If i check the how much space the package cache for pkg(1) uses, it takes a bit longer on this host than on comparable machine to which i transferred all the data. user at host:/var/pkg$ time

I want to run a non-global zone as a virtual router and run ipnat inside the non-global zone, however, when I try to enable routing it can''t find route:default or network/ipfilter. I''m using exclusive IP inside the zones and using OpenSolaris 2008.11 build 110. I''ve tried sparse root and whole root zones without success. I''ve read blogs and posts and