similar to: zpool import -f rpool hangs

I''m still trying to find a fix/workaround for the problem described in Unable to mount root pool dataset http://opensolaris.org/jive/thread.jspa?messageID=492460 Since the Blade 1500''s rpool is mirrored, I''ve decided to detach the second half of the mirror, relabel the disk, create an alternative rpool (rpool2) there, copy the current BE (snv_134) using beadm

I have a raid-z zfs filesystem with 3 disks. The disk was starting have read and write errors. The disks was so bad that I started to have trans_err. The server lock up and the server was reset. Then now when trying to import the pool the system panic. I installed the last Recommend on my Solaris U3 and also install the last Kernel patch (120011-14). But still when trying to do zpool import

Is it possible to convert Solaris 10 DomU from hvm to pv?? Dom0 is Opensolaris b132. Possibly any Documentation about this? Here is config of Solaris DomU: <domain type=''xen'' id=''1''> <name>Solaris-10</name> <uuid>c505f6c3-b37b-8268-fe46-f10b3277238b</uuid> <memory>2097152</memory>

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

(From the README) # Jeb Campbell <jebc at c4solutions.net> NOTE: This is last resort if you need your data now. This worked for me, and I hope it works for you. If you have any reservations, please wait for Sun to release something official, and don''t blame me if your data is gone. PS -- This worked for me b/c I didn''t try and replace the log on a running system. My

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

Hi, all, I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up. I do a successful install, then I boot OK,

I believe ZFS is causing a panic whenever I attempt to mount an iso image (SXCR build 39) that happens to reside on a ZFS file system. The problem is 100% reproducible. I''m quite new to OpenSolaris, so I may be incorrect in saying it''s ZFS'' fault. Also, let me know if you need any additional information or debug output to help diagnose things. Config: [b]bash-3.00#

Hi, I hope there''s someone here who can possibly provide some assistance. I''ve had this read problem now for the past 2 months and just can''t get to the bottom of it. I have a home snv_111b server, with a zfs raid pool (4 x Samsung 750GB SATA drives). The motherboard is a ASUS M2N68-CM (4 SATA ports) with an Athlon LE1620 single core CPU and 4GB of RAM. I am using it

Hello, I''m using the latest b75 ISO to try and get a solaris dom0 running on my laptop, a Sony SZ-330P. The Xen LiveCD works just fine, so I know that theoretically it should work. Build 75 also works just fine on my Sony, including sound and video, etc. But when I try and boot the Xen kernel, the system hangs. There''s no panic printed to console. If I pass a -v option at

One of our Solaris 10 update 3 servers paniced today with the following error: Sep 18 00:34:53 m2000ef savecore: [ID 570001 auth.error] reboot after panic: assertion failed: ss != NULL, file: ../../common/fs/zfs/space_map.c, line: 125 The server saved a core file, and the resulting backtrace is listed below: $ mdb unix.0 vmcore.0 > $c vpanic() 0xfffffffffb9b49f3() space_map_remove+0x239()

Hello, I have a situation where a host, which is booted off its ''rpool'', need to temporarily import the ''rpool'' of another host, edit some files in it, and export the pool back retaining its original name ''rpool''. Can this be done ? Here is what I am trying to do: # zpool import -R /a rpool temp-rpool # zfs set mountpoint=/mnt

I was messing around with a ramdisk on a pool and I forgot to remove it before I shut down the server. Now I am not able to mount the pool. I am not concerned with the data in this pool, but I would like to try to figure out how to recover it. I am running Nexenta 3.0 NCP (b134+). I have tried a couple of the commands (zpool import -f and zpool import -FX llift) root at

I seem to have managed to end up with a pool that is confused abut its children disks. The pool is faulted with corrupt metadata: pool: d state: FAULTED status: The pool metadata is corrupted and the pool cannot be opened. action: Destroy and re-create the pool from a backup source. see: http://illumos.org/msg/ZFS-8000-72 scan: none requested config: NAME STATE

Hello experts, I heard that there is something called anonymous dtrace that would still be running when I do a reboot. Basically, I have the following problem: The /boot/solaris/bootenv.rc file in my alternate boot environment is getting modified when I reboot the machine after doing luactivate <ABE>. It happens only on init 6, doesn''t happen when I do a simple reboot. The set

Hi all, Please can you help with my ZFS troubles: I currently have 3 x 400 GB Seagate NL35''s and a 500 GB Samsung Spinpoint in a RAIDZ array that I wish to expand by systematically replacing each drive with a 750 GB Western Digital Caviar. After failing miserably, I''d like to start from scratch again if possible. When I last tried, the replace command hung for an age, network

Hi, LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I''m changing LUN size on netapp and solaris format see new value but zpool still have old value. I tryed zpool export and zpool import but it didn''t resolve my problem. bash-3.00# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0d1 <DEFAULT cyl 6523 alt 2 hd 255 sec 63>

I would like to pick the brains of the ZFS experts on this list: What would you do next to try and recover this zfs pool? I have a ZFS RAIDZ1 pool named bank0 that I cannot import. It was composed of 4 1.5 TiB disks. One disk is totally dead. Another had SMART errors, but using GNU ddrescue I was able to copy all the data off successfully. I have copied all 3 remaining disks as images using

Hello all, I have an oi_148a PC with a single root disk, and since recently it fails to boot - hangs after the copyright message whenever I use any of my GRUB menu options. Booting with an oi_148a LiveUSB I had around since installation, I ran some zdb traversals over the rpool and zpool import attempts. The imports fail by running the kernel out of RAM (as recently discussed in the list with

Hi list, I''ve got a system with 3 WD and 3 seagate drives. Today I got an email that zpool status indicated one of the seagate drives as REMOVED. I''ve tried clearing the error but the pool becomes faulted again. Taken out the offending drive and plugged into a windows box with seatools install. Unfortunately seatools finds nothing wrong with the drive. Windows seems to see