similar to: OpenSolaris 2009.06 - ZFS Install Issue

I''m not sure exactly what happened with my box here, but something caused a hiccup on multiple sata disks... May 9 16:40:33 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci10de,5c at 9/pci-ide at a/ide at 0 (ata6): May 9 16:47:43 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci-ide at 7/ide at 1 (ata3): May 9 16:47:43 sol timeout: abort request, target=0

Hi Host: VirtualBox 2.1.0 (WinXP SP3) Guest: OSol 5.11snv_101b IDE Primary Master: 10 GB, rpool IDE Primary Slave: 10 GB, empty format output: AVAILABLE DISK SELECTIONS: 0. c3d0 <DEFAULT cyl 1302 alt 2 hd 255 sec 63> /pci0,0/pci-ide at 1,1/ide at 0/cmdk at 0,0 1. c3d1 <drive unknown> /pci0,0/pci-ide at 1,1/ide at 0/cmdk at 1,0 # ls

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

Hello! I''am setup zfs / cifs home storage server, end now have low performance with play movie stored on this zfs from windows client. server hardware is not new , but n windows it perfomance was normal. CPU is AMD Athlon Burton Thunderbird 2500, runing on 1,7GHz, 1024 RAM and storage: usb c4t0d0 ST332062-0A-3.AA-298.09GB /pci at 0,0/pci1458,5004 at 2,2/cdrom at 1/disk at

Hi all, Please can you help with my ZFS troubles: I currently have 3 x 400 GB Seagate NL35''s and a 500 GB Samsung Spinpoint in a RAIDZ array that I wish to expand by systematically replacing each drive with a 750 GB Western Digital Caviar. After failing miserably, I''d like to start from scratch again if possible. When I last tried, the replace command hung for an age, network

Dear ZFS experts, I have 2 SATA 500 GB Hard Drive on my Dual Core PC I have installed OpenSolaris 2008.11 using Live CD I got from Sun Tech Days in Singapore Now, using all the guidelines I got here at Indiana Discussion, I can''t attach my second drive to rpool to make them mirror Initially I was playing around with similar configuration in VirtualBox, and it does not succeed. Finally

i''ve got a little zpool with a naughty raidz vdev that won''t take a replacement that as far as i can tell should be adequate. a history: this could well be some bizarro edge case, as the pool doesn''t have the cleanest lineage. initial creation happened on NexentaCP inside vmware in linux. i had given the virtual machine raw device access to 4 500gb drives and 1 ~200gb

Hi, I hope there''s someone here who can possibly provide some assistance. I''ve had this read problem now for the past 2 months and just can''t get to the bottom of it. I have a home snv_111b server, with a zfs raid pool (4 x Samsung 750GB SATA drives). The motherboard is a ASUS M2N68-CM (4 SATA ports) with an Athlon LE1620 single core CPU and 4GB of RAM. I am using it

I''ve got knee deep into learning how to use Opensolaris and zfs, and I see now that my goal of home zfs server may have been better served if I had partitioned the install disk leaving some of the 60GB to be added to a zpool. First, how much space does a working OS need. I don''t mean bare minimum but to be comfortable and have some growing room (on the install disk)?

One of my disks in the zfs raidz2 pool developed some mechanical faliure and had to be replaced. It is possible that I may have swaped the sata cables during the exchange, but this has never been a problem before in my previous tests. What concerns me is the output from zpool status for the c2d0 disk. The exchanged disk is now c3d0 but is no longer a part of the pool?! This is build_75 on x86

I''ve seen the problems with bug 6343667, but I haven''t seen the problem I have at the the moment. I started a scrub of a b72 system that doesn''t have any recent snapshots (none since the last scrub) and the % complete is cycling: scrub: scrub in progress, 69.08% done, 0h13m to go scrub: scrub in progress, 46.63% done, 0h28m to go scrub: scrub in progress, 6.36%

Sorry for the long post but I know trying to decide on hardware often want to see details about what people are using. I have the following AS-2022G-URF machine running OpenGaryIndiana[1] that I am starting to use. I successfully transferred a deduped zpool with 1.x TB of files and 60 or so zfs filesystems using mbuffer from an old 134 system with 6 drives - it ran at about 50MB/s or

Hi, all, I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up. I do a successful install, then I boot OK,

Hi, Your attempt didn't work because you didn't do what I suggested, which was make sure that your data frame matched the example given in the help for gantt.chart. Here's what you have: > str(cdfg) 'data.frame': 3 obs. of 3 variables: $ c1d1: Factor w/ 3 levels "task 1","task 3",..: 1 3 2 $ c2d1: POSIXct, format: "2018-04-01"

Hi Sarah Thank you very much for your pointers. Is there a way to specify the date string as POSIXct when reading in? I have tried the following (very inelegant way) and still have no luck. --- Begin Code --- # 1st read in the spreadsheet with stringsAsFactors set to FALSE > abc <- read.csv("gntr1.csv", header=TRUE, stringsAsFactors=FALSE) > abc code tasks.labels

I''ve been trying to get either smartctl or sg3_utils to report properly. They both have the same low-level problems which leads me to suspect either I''m doing something wrong OR there is a problem in the marvell88sx / sd / SATA etc framework. I can access drive name/serial number of all drives on the SAT2 card and the temperature is returned from the IE log page on my two

Author: lclee Repository: /hg/zfs-crypto/gate Revision: c80632cae25a4c92285f9e6434b64aa3f3aa6b79 Log message: 4855218 sparc: Need EFI label support on IDE 6275431 x86: Need EFI label support on IDE 6340778 cmlb: common disk label code 6326547 format: converting EFI to VTOC, fdisk info is taken from a random disk 6335611 format: Need to warn users that data will be lost when converting to and from

Hi! I tried to add an other FiweFire Drive to my existing four devices but it turned out, that the OpenSolaris IEEE1394 support doen''t seem to be well-engineered. After not recognizing the new device and exporting and importing the existing zpool, I get this zpool status: pool: tank state: DEGRADED status: One or more devices could not be used because the label is missing or

Hey guys, I had a zfs system in raidz1 that was working until there was a power outage and now I''m getting this: pool: tank state: DEGRADED status: One or more devices are faulted in response to IO failures. action: Make sure the affected devices are connected, then run ''zpool clear''. see: http://www.sun.com/msg/ZFS-8000-HC scrub: scrub in progress for 0h49m,

Hi all, we have just bought a sun X2200M2 (4GB / 2 opteron 2214 / 2 disks 250GB SATA2, solaris 10 update 4) and a sun STK 2540 FC array (8 disks SAS 146 GB, 1 raid controller). The server is attached to the array with a single 4 Gb Fibre Channel link. I want to make a mirror using ZFS with this array. I have created 2 volumes on the array in RAID0 (stripe of 128 KB) presented to the host