similar to: Moving away from XenServer - need some advise on networking please

I want to know, is it possible for an external network added in xenserver, to be part of multiple Vlans? If so, what are the commands to do the same.? -- Regards, Manoj R _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Dear XCP lovers, We have installed XCP 1.1 on our BladeCenter and it is working like a charm. Except when creating a VLAN, the xenserver needs to be switched to bridge mode and back to openvswitch. As I understood, this is a bug in xenserver 5.6 SP2 and will be fixed in the xencenter 6.0 which will come with XCP 1.5. Is there a date when the beta version will be released ? Concerning our VLAN

Hello, I am using XCP 1.0 and am accessing it with XenCenter. I have three NIC''s and I have bonded two of them through the XenCenter frontend. I then create a VLAN using XenCenter and attach it to the bond0. I create a VM and create its NIC to use VLAN 10, which it does and when the VM boots the NIC shows Active inside of XenCenter. When I look at the XCP host it shows VLAN 10 as an

Hi List, I'm trying to configure two switches to provide redundancy (i.e. in case one switch goes down), and am wondering if there is a standard way to configure a CentOS box to use different gateways in a bonded interface, depending upon which physical nic is being used? A bit more detail might help answer the "And why do you want to do that?" questions... - Switch 1,

I am a consultant needing to learn virtual machines. Using XEN Server 6 as tool. I will put real internet servers on it when stable. Been working fine till it crashed out of the blue. This problem is from a full wipe and reload. Problem: 1. Build XEN Server 6. Works fine after install reboot. 2. Reboot XEN Server. Big message "The underlying Xen xapi is not running"

I am running CentOS 5.3 x86_64 as my dom0 and CentOS 5.3 on my domU's. On the dom0, I have two interfaces that are bonded and have tagged VLANs. I can get the networks to the domU's by creating a bridge for each of the VLANS (bond0.3, bond0.4, etc). On the domU, the interfaces show up as eth0, eth1, etc. Is there a way to set up the network on the dom0 so my domU's see a single

On Wed, Mar 15, 2017 at 10:10:36AM +0000, Daniel Pocock wrote: > > I've been using XenServer / XCP (with the "xe" toolset) for a number of > years for hosting servers used for development and free software > projects and I'm now looking at migrating all those environments to > libvirt / KVM. > > I had a look at the wiki[1] already and didn't see

Hi Eric, Thanks for your response. ________________________________________ From: Eric Blake [eblake@redhat.com] Sent: Tuesday, May 28, 2013 9:07 PM To: Parakkal, Navin S Cc: libvirt-users@redhat.com; Daniel P. Berrange Subject: Re: [libvirt-users] libvirt for Citrix XenServer On 05/27/2013 12:43 AM, Parakkal, Navin S wrote: >> Hi, >> Can someone send me the build steps how to

On 05/27/2013 12:43 AM, Parakkal, Navin S wrote: > Hi, > Can someone send me the build steps how to build for Citrix XenServer ? I want to build a version of libvirt for Citrix XenServer. Fedora doesn't build for xenserver by default, because the development headers for xenserver are not under a free license. However, you can download the xenserver development kit yourself at no

Hello everyone I am running into some strange issues when configuring networking interfaces on my physical server running Centos 7.5. Let me give you an overview of what's going on: We have a physical server, running CentOS 7.5. This server has one 4 port NIC and one 2 port NIC and a Dell IDRAC port. The first port of the 4 port NIC, em1, is used for Management traffic. The first port of

Hi. I''m new to Xenserver. I have to configure high availability between two Xenservers I have attached a rough sketch. The licensing that has been purchased is for "Advanced". I want to use shared storage, where both the Xenservers use a common LUN. The virtual machines will "live" on this LUN. I want the virtual machines to be running on one Xenserver. If this

Hi, I installed two linux VMs in XenServer 6.0, one is CentOS 5.5 and the other is Ubuntu 10.04, both of which are HVMs. I install xenserver tools many times and the packages are installed, but XenCenter keeps telling me that "Xenserver tools is not installed". Are xenserver tools of linux intended only for PV vm? I am not familiar with xenserver and need help.Thanks! Best Regards,

Hi, I am new to citrix xen server. I have sucesfully installed citrix xen server 5.6.1 Fp1(free version) on my system. and through xencenter I have connected citrix xenserver and created vm (centos 5.5 32 bit), Installed Xen-tools in centos. My xenserver and xen vm ip details are below Xenserver Ip address - 192.168.1.5 Netmask - 255.255.255.0 Gateway - 192.168.1.1 which is my xencenter

________________________________ From: Prasad [prasad@mukhedkar.com] Sent: Tuesday, May 28, 2013 7:33 PM To: Parakkal, Navin S Subject: Re: [libvirt-users] libvirt for Citrix XenServer On 05/27/2013 12:13 PM, Parakkal, Navin S wrote: Hi, Can someone send me the build steps how to build for Citrix XenServer ? I want to build a version of libvirt for Citrix XenServer. Regards, Navin

Dear All, am new to xen and recently implemented it. i had some issues initially but googling arround and some wise replies from you guys out there managed to clear them. now I have 2 virtual machines on my xen domains one is windows 2003 and other windows2008 both the virtual machines were working fine for about a week jus 2 days back we had a change in our network . i mean we rearanged the

A friend of mine recommended checking out the Vyatta project. I was reviewing their website and saw endorsements of their product running on both Vmware and Xen. In fact, they have a Vmware virtual image and a beta XenServer image. However, I am running a typical Debian Lenny 64 DomU installed through the repositories. According to their installation documents, it states that the ISO can be

Hi Rahul, If you're certain that your problem isn't as Stephen suggested, you might want to have a look at this: --- (From http://ebtables.sourceforge.net/brnf-faq.html <http://ebtables.sourceforge.net/brnf-faq.html> ) How do I let vlan-tagged traffic go through a vlan bridge port and the other traffic through a non-vlan bridge port? Suppose eth0 and eth0.15 are ports of br0.

Hello, I am a system manager of a datacenter. Is this moment, we about 30-40 xen servers running 2 or 3 domUs each of them. We are now using (standalone) xen over debian lenny. We manage each xen server independently, but we are looking for a central management console. At this moment, I have the doubt about using citrix xenserver (the free edition) or XCP. I didn''t know much

I didn''t want to re-open this old post that I found: http://xen.1045712.n5.nabble.com/xen-users-Need-to-migrate-a-centos-image-from-xen-source-to-xenserver-td5532281.html however I am in the same predicament. Can anyone explain how to extract a Windows Server 2008 VM from Xen and import it into XenServer? -- View this message in context:

One of the issues I''ve had using XenServer in a multitenant environment is the requirement for the VMs to have xentools installed as it causes significant issues when upgrading the VM OS or the pool from one version of XenServer (XCP) to another. Having to touch hundreds VMs (by hand) after an upgrade just doesn''t scale nor is delegating the task to VM owners an option.