similar to: dom0 won''t boot - iwlagn MAC is in deep sleep

Hi, With a fairly current kernel + xen, I''m seeing this if I rmmod iwlagn and try to reload it: [51230.646678] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [51230.646685] Copyright(c) 2003-2011 Intel Corporation [51230.646760] xen: registering gsi 17 triggering 0 polarity 1 [51230.646773] xen_map_pirq_gsi: returning irq 17 for gsi 17 [51230.646777] xen: --> pirq=17

Hi all, I have a data frame called "rst", see below: ------------------------------------------------------------------------------------------ # This is a paste able example # In case you don't have "KernSmooth" package installed, please uncomment below line. # install.packages("KernSmooth") library(KernSmooth) rst <- data.frame(hsp = rnorm(23), dal =

I have been assued in other places that I need to have Samba and Wins in place touse Windows networking across an openvpn tunnel. back history: There was a network in place when I was hired to replace the former it guy. All ran very smooth with only one networking issue. There were "fights" between the Windows server and the Linux box: The master browser has received a server

How do I back out of these directions?<br/><br/>"yum install iwl4965-firmware<br/><br/>rmmod iwl4965; modprobe iwl4965<br/><br/>Your wireless device should be working now. Enable NetworkManager to use it. <br/>Starting from CentOS 5.3 (kernel 2.6.18-128) the kernel includes the iwlagn kernel module. If you are running an older kernel, please look at

Hi, When I compile the construction \begin{Scode}{eval=FALSE} ?HSP \end{Scode} with Sweave and latex, it outputs in the pdf as, > `?` (HSP) which is not incorrect but a bit more formal than I wanted for demonstrating the use of the help shortcut. I would like the output to look like, > ?HSP but I can't seem to make this work. I have also tried the results=verbatim argument.

Hi I''ve installed Solaris snv111 in a QEMU virtual machine using qemu 0.10.2 with kqemu 1.4 enabled. The installation worked without problems but after rebooting from the virtual disk Solaris panics: qemu usage: /opt/qemu_0.10.x/bin/qemu-system-x86_64 -net user -net nic -usb -usbdevice tablet -L /usr/local/share/qemu_0.9.x -boot c -m 1024 -net nic,model=rtl8139 -net nic -net nic

Am 13.06.2015 um 13:54 schrieb Luca Bertoncello: > I think there are many german users in this ML, that use Asterisk with the > new line of Deutsche Telekom (Magenta Zuhause). I don't think so. Most users will use the router provided by Telekom. Anyway, after 15 seconds of Google'ing for Magenta Zuhause and SIP, maybe this will help you:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Guenther Boelter <gboelter at gmail.com> schrieb: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA256 > > On 05/31/2015 02:31 PM, Luca Bertoncello wrote: > > Hi list! > > > > Now all works as expected, at least in the simulation I did with > > AsteriskNOW. Hopefully it will work later, when Deutsche Telekom

Dear all, (please Cc) yesterday I had two bugs with btrfs and ext3 occurrences, always happening when plugging in an external USB btrfs disk. Today I had a BUG which is purely ext3 related. The last bug was with yesterdays latest git checkout. Here are the three bugs/oops: that one was with 3.0.0-rc2 (exactely) Jun 10 14:50:23 mithrandir kernel: [40871.704129] BUG: unable to handle kernel

Dear R-Users, Have a question about reading in some data and manipulating dates. I have a data set in excel which looks like this: Date PEG ETN HSP PTC 13/10/2004 41.92 64.75 29.86 9.27 14/10/2004 41.93 61.79 29.98 9.14 15/10/2004 41.69 62.7 30.09 9.04 18/10/2004

On the following system: Linux 2.6.18-128.el5 #1 SMP Wed Jan 21 10:41:14 EST 2009 x86_64 x86_64 x86_64 GNU/Linux the Intel 5100 pci wireless adapter appears to be detected and a reasonable driver is indicated (iwlagn) but the radio does not appear to be on, at least the little antenna like LED is off. The radio switch is on and the Bluetooth LED is on. Has any one conquered this yet? --

On Fri, 17 Feb 2017, Joseph L. Casale wrote: >> [root at localhost yum.repos.d]# mtp-detect >> libmtp version: 1.0.1 >> >> Listing raw device(s) >> No raw devices found. > > Does your phone have a usb setting for phone versus mtp mode? I think it doesn't. >From dmesg: usb 2-2.4: USB disconnect, device number 10 usb 2-2.4: new full speed USB device

Hello, I''ve hit known problem with dynamic memory management - memory fragmentation... This dynamic memory management basically does xl mem-set to balance memory. After some time of running system, xen memory is so fragmented that it is impossible to start new VM with PCI device. Sometimes it crashes during boot (no 64MB contiguous memory for SWIOTLB), or later - eg. iwlagn cannot

Hi, first of all, sorry for my poor english. I have installed Samba4 (stable tarball) on a fresh Centos 6.3 x64 server, with the "classicupgrade" command. With great difficulty I managed to correctly configure the DNS server (bind). "kinit", "smbclient" and "samba_dnsupdate - verbose - all-names" give the desired output. Starting samba daemon, this is the

Hi, I've been using the nouveau driver for some time on my Latitude T61p with a Quadro NVS 140M card: 4pll00555 ~ # lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection

The reason for the behaviour observed below turned out to be that the device entry in /etc/multipath.conf was inadvertently appended *after* the devices section , rather than inside it - so that we had #devices { # device { # blah blah # } (file has a bunch of defaults commented out) # etc #} # # device { our settings } *rather than*

hi all We have a rh linux server connected to two HP SAN controllers, one an HSV200 (on the way out), the other an HSV400 (on the way in). (Via a Qlogic HBA). /etc/multipath.conf contains this : device { vendor "(COMPAQ|HP)" product "HSV1[01]1|HSV2[01]0|HSV300|HSV4[05]0" getuid_callout "/sbin/scsi_id -g -u -s /block/%n"

Hello all, I recently had a power failure and can no longer mount my /home directory. The harddrive has two BTRFS partitions: sda7(/) and sda8(/home). The / partition loads up just fine, but /home does not. I''ve tried btrfsck as shown below and I''ve included dmesg pertaining to btrfs. This is on ArchLinux and the software versions are as follows: btrfs-progs-unstable

--=-=-= Sorry, forgot to attach the file... --=-=-= Content-Type: application/zip Content-Disposition: attachment; filename=pdcompilelog.zip Content-Transfer-Encoding: base64 UEsDBBQAAAAIAImkRTGksC5Kaw8AACBOAAATABUAcGQuY29uZmlndXJlLm91dHB1dFVUCQADoeli QY3pYkFVeAQA9AFkAOVcbY/bNhL+nl8hFAc0vcR2Nt1kgwJ3QLLrtm73JdjNHRb3xaApymYskapE

Hello, The topic is self-explanatory: how to ensure that a PV driver domain correctly prepares its PCI devices for S3 sleep? If I do "pm-suspend" in dom0, and the driver domain has active network interfaces, suspend hangs the system. Yes, in case of this particular machine, suspend works fine when there is no driver domain. It is possible to manually invoke scripts from