similar to: Need Help with Fence_xvm

Hi, We have two nodes with centos 5.5 x64 and cluster+gfs offering samba and NFS services. Recently one node displayed the following messages in log files: Sep 13 08:19:07 NODE1 gfs_controld[3101]: cpg_mcast_joined error 2 handle 2846d7ad00000000 MSG_PLOCK Sep 13 08:19:07 NODE1 gfs_controld[3101]: send plock message error -1 Sep 13 08:19:11 NODE1 gfs_controld[3101]: cpg_mcast_joined error 2

Hi, I have configured two machines for testing gfs filesystems. They are attached to a iscsi device and centos versions are: CentOS release 5.4 (Final) Linux node1.fib.upc.es 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56 EDT 2009 i686 i686 i386 GNU/Linux The problem is if I try to mount a gfs partition it hangs. [root at node2 ~]# cman_tool status Version: 6.2.0 Config Version: 29 Cluster Name:

Hi I am using a two node cluster to achieve high availability. I am basically testing a scenario where in if i shutdown my node (node-1) then the other node (node-2) should start functioning like node-1. Currently what i am observing is that the entire cluster gets into "Stopped" state. Here is my cluster.conf file ************************ <?xml version="1.0"?>

Hi everybody, I have tested CTDB+GFS2+CMAN under Debian. It works good but I do not understand some points. It is possible to run the CTDB defining it under services section in cluster.conf but running it on the second node shuts down the process at the first one. My CTDB configuration implies 2 active-active nodes. Does CTDB care if the node starts with clean_start="0" or

Hi? All: I have two physical machines as KVM hosts (clusterA.RHCS and clusterB.RHCS) , an iscsi target set into GFS. All I want is a HA Cluster which could migrate all the virtual machines on a node to another when the first node failed into some error status. So I created a cluster "cluster" using RHCS ,added the two hosts into the cluster . created a fence device . for every virtual

Hi Guys, I'm using centos 6.5 as guest on RHEV and rhcs for cluster web environment. The environtment : web1.example.com web2.example.com When cluster being quorum, the web1 reboots by web2. When web2 is going up, web2 reboots by web1. Does anybody know how to solving this "fence loop" ? master_wins="1" is not working properly, qdisk also. Below the cluster.conf, I

Hi. The short story... Rush job, never done clustered file systems before, vlan didn't support multicast. Thus I ended up with drbd working ok between the two servers but cman / gfs2 not working, resulting in what was meant to be a drbd primary/primary cluster being a primary/secondary cluster until the vlan could be fixed with gfs only mounted on the one server. I got the single server

I have Centos 6.1 and i'm configuring cluster with conga, lucci and ricci these services are installed and running without problem. I need this type configuration for a high availability of virtual machines which is run on kvm. My problem is at the time of configuring "service group", when i click to add appears the new windows wich say "add service to cluster" and i fill

Dear List, I have one last little problem with setting up an cluster. My gfs Mount will hang as soon as I do an iptables restart on one of the nodes.. First, let me describe my setup: - 4 nodes, all running an updated Centos 5.2 installation - 1 Dell MD3000i ISCSI SAN - All nodes are connected by Dell?s Supplied RDAC driver Everything is running stable when the cluster is started (tested

Hi guys ... I have a problem ... here is my settup luci xen0 xen1 [root at xen1 ~]# clustat Cluster Status for XEN_Cluster @ Mon Jun 29 03:31:23 2009 Member Status: Quorate Member Name ID Status ------ ---- ---- ------ xen0.genx.local

Hi there. I have 2 days trying to resolve this issue ... I have 2 xen servers in cluster ... and I installed Luci on another server separate from the 2 xen servers. I created a cluster ... I create a failed over domain .... I did migration and live migration from a dom0 to another ... My problem is .... I don`t have "Add a virtual Service" tab to add A VM as a cluster service ...

I'm desparately looking for more ideas on how to debug what's going on with our CLVM cluster. Background: 4 node "cluster"-- machines are Dell blades with Dell M6220/M6348 switches. Sole purpose of Cluster Suite tools is to use CLVM against an iSCSI storage array. Machines are running CentOS 5.8 with the Xen kernels. These blades host various VMs for a project. The iSCSI

Dear Sir, I have implemented Samba PDC. Its working fine. But o do Highly Available, I have been trying to make it in 2 node cluster. Everything is running fine. But facing a problem, which I want to share. When I shift PDC to another cluster node. Everything is shifting fine. But my existing user can not log in. The can logged in again if I rejoined that mechine again to domain. I am explaining

centOs5.5/samba4/named here is a short guide setting it up to work. I added TSIG for bind-master amd bind-slave. Update to samba4 alpha13 added (installing git on CentOs 5.5). If you do this howto right now you will start with samba4 alpha13. You do not need the update section. But you need git for your installation because the rsync-thing is broken!!!!!! First of all do not install the bind

centOs5.5/samba4/named here is a short guide setting it up to work. First of all do not install the bind package coming with centos 5.5!! Install needs for samba yum install libacl* gnutls* readline* python* gdb* autoconf* Named installation: Here is a description on what to do: http://jason.roysdon.net/2009/10/16/building-bind-9-6-on-rhel5-centos5-for-d nssec-nsec3-support/ The steps, yum

centOs5.5/samba4/named here is a short guide setting it up to work. First of all do not install the bind package coming with centos 5.5!! Install needs for samba yum install libacl* gnutls* readline* python* gdb* autoconf* Named installation: Here is a description on what to do: http://jason.roysdon.net/2009/10/16/building-bind-9-6-on-rhel5-centos5-for-d nssec-nsec3-support/ The steps, yum

I've got a Centos 5.8 box that I use for testing Xen VMs. I'm trying to setup some Centos 6.2 hosts in a high availability situation. I've tried the pacemaker route and couldn't get the connection established, so thought I'd try the RH-preferred methods. Mind you, all of these VMs are on the same host. Using Conga, it seems that I need some sort of fencing device, which

Hi all, A recent update to CentOS 5.9 has broken my cluster's ability to fence nodes. I have two Dell's which are both fenced via their DRAC6 cards. The current configuration in cluster.conf for the fencing devices is: <fencedevice agent="fence_drac5" cmd_prompt="admin1-&gt;" ipaddr="192.168.251.11" login="fencer" name="ms1-drac"

Hi! For those of who who didn't notice it yet: {www,ftp,rsync,cvs,lists,people,bugzilla}.netfilter.org has now been migrated to our new server, a Apple Dual G5 XServe ClusterNode Apart from just switching old sparc64 against new ppc64 hardware, there were some major software upgrades: - Mailman was upgraded from 2.0.11 to 2.1.5 - Bugzilla was upgraded from 2.14.2 to 2.18rc2 - Apache

Hi there. I am not sure if this is the right place to address my question, but I need someone how knows about the channel system of openssh. At the moment, I try to modify the openssh source to fit to my needs. Therefore I modified the openssh source so it can be called from my source like a function (simply changed "void main()" to "void ssh()"). This works perfect for the