similar to: XCP-1.0-beta (or XCP 0.5) pv2 migration

I''m trying to build out a test cloud using XCP 1.0.0 beta with 3 machines of 18 cores total (Phenom II 1090s). I''ve built three machines, installed XCP 1.0.0 beta on them and they all three have the same problem - the Realtek network cards don''t work. The following is the output from lspci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI

Hello, I am quite new on XCP. At first, i had a Xenserver server but i am looking for a full open source solution and of course I discovered XCP. Actually, i have one xenserver and one XCP server that I manage through Xencenter. I''m trying to P2V an existing ( old Mandriva ) server to XCP. I tried differents things, all without success. Boot on XCP disk to find a P2V option. ->

Hi Folks: I am a NOOB and need some help and/or advice about debugging a domU VM boot problem in XCP 1.0 beta. I am trying to get my first VM installed over the network using XCP 1.0 beta. I am able to get to the VNC boot window but the installation process fails after a few minutes with this error: Unable to retrieve http://10.45.2.1//tcc/os/CentOS-5.5-x86_64/images/stage2.img

Hello, I have a problem with storage over NFS (NFS server is running on Open Solaris 10 with NFS version client/server/min/max=3) cat /var/log/messages from cnode1 (XCP 1.0 beta) during instalation new VM: an 18 22:57:37 cnode1 tapdisk[9661]: ERROR: errno -88 at vhd_complete: /var/run/sr-mount/2d5ed3ca-7e4d-bceb-f959-542d3bade15e/3d69f4a6-743d-486e-8a65-1734e6ef0b67.vhd: op: 2, lsec:

Hi guys, I upgraded my home server to check out XCP 1.0 but i have a big problem. After the upgrade my network just died. I see the card, it''s listed as xenbr0 but there is no network acces/connection going over it. A ping to or from the server results in nothing. When i check out the configure managment interface settings i see the NIC, and it states connected. But there is no way to

Package: xcp-xapi Version: 1.3.2-6 Severity: important Configuration: Two xcp-xapi hosts (default sid/xcp-xapi installation) in single pool. Network backend is bridge. After migration of 'idle' (doning nothing) virtual machine it stops to reply to ping for long time. AFAIK that caused by mac-learning table on upper level (hardware) switch, which route all frames to wrong port

Hi All, I''m doing some testing with XCP 1.6 Beta and I can´t do the following migration: The VM is in a shared storage and I want to migrate to the same host in the local storage. Isn´t possible to migrate to the same host? Marcos Amorim _______________________________________________ Xen-users mailing list Xen-users@lists.xen.org http://lists.xen.org/xen-users

Dear list, I am battling with rather grave performance issues in the 42052 build of XCP 1.0. Specifically, this concerns disk IO both on the host and in the VMs. I have tested the connectivity to the NFS/iSCSI server that backs the whole platform (Nexenta, SSD ZIL/l2arc, striping over 9 5-disk zraid1), and from a clean Ubuntu install, I am able to saturate the network both over NFS and iSCSI

XenServer Installation Guide from  http://www.citrix.com/site/resources/dynamic/salesdocs/XenServer_Quick_Installation_Guide.pdf This is a step by step guide for the installation.  I have some questions as to the content of the guide: p.5 Enable thin provisioning (Optimized storage for XenDesktop). What does this mean? What are the values and consequences? p. 5 One of the choices is not to

Hi All, Does anybody have any tips or suggestions for migrating from a CentOS + Xen setup and using cobbler/koan [1] for VM provisioning to an XCP setup using XCP templates (or similar) to provision VMs? cobbler/koan make use of kickstart, which It looks like XCP can do as well. Mainly, I am wondering if converting the cobbler profiles could be done automatically and reliably? Any comments,

I''m looking to expose a(several) drive "/dev/sda" that is physically to the XCP host to a pv guest running locally. I know this would tie the VM, which lives in a remote SR, to this specific XCP host that this local disk. I''m not looking to create a VHD file on this local drive and use it as a disk in the VM. I''m looking to expose entire physical disks to

Can somebody educate me as the differences between XCP-1.0 and XEN 4. From what I can see XCP-1.0 has XEN 3.4.2 So why would you not build XCP-1.0 with XEN 4.0 Regards David Moore moored@romtech.com.au J.P. MCP, MCSE, MCSE + INTERNET, CNE. www.adsldirect.com.au for ADSL and Internet www.romtech.com.au for PC sales Office Phone: (+612) 9453 1990 Fax Phone: (+612) 9453 1880 Mobile Phone:

Anyone here using the XCP 1.0 Storage EqualLogic has the dell? In Citrix XenServer Xencerter appears to integration, but in XenCenter not with XCP. I read that the drivers were removed. No way around installing the drivers again? Cordialmente, Lorscheider Santiago +55 85 81559040 Msn: lorscheider_santiago@hotmail.com Visite meu blog: http://lsantiago.spaces.live.com Twitter:

Hello I have a Supermicro system with Intel XEON cpu with VT enabled. HVM, without Windows PV driver, works great. I am trying to use Windows PV driver from XCP 0.5, it is in the .iso file of XCP 0.5 Filename: windows-pvdrivers-xensetup.exe I have tried - XEN 3.4.3 (Linux 2.6.18.8) - XEN 4.0.1-rc6-pre (Linux 2.6.31.x and Linux 2.6.32.x from Jeremys GIT) and - XEN 4.0.1-rc6 (Linux 2.6.31.x and

Hi all, I am experimenting an issue with XCP 1.0 and NetApp storage model . My XCP server has a QLE2460 single channel fibre card. I have successfully connected the server to the storage. I can see the LUN connected via fibre channel by using scli command: scli output: ---------------------------------------------------------------------------- ---- HBA Instance 0: QLE2460 Port 1

Hi everyone, since last week maintenance on the xen.org website, the 0.5 source iso package is not available anymore. I need it to recompile the ixgbe driver which is quite outdated on the stock XCP 0.5. Does anyone know where I could download that iso? Cheers, Denis -- Denis Cardon Tranquil IT Systems 44 bvd des pas enchantés 44230 Saint Sébastien sur Loire tel : +33 (0) 2.40.97.57.57

Hi, I''ve installed XCP-0.5 and openxenmanager/xenwebmanager shows me a thirty days license. Is it only for my confusion or aren''t the licensing components not removed ( http://lists.xensource.com/archives/html/xen-users/2010-01/msg00118.html ) or do i need someting like a license file for 0.5? Thanks Christian _______________________________________________ Xen-users

Package: xcp-xapi Version: 1.3.2-8 Severity: important Tags: patch Found race condition (specific only to slave hosts): xcp-xapi can start earlier than xcp-networkd due lack of dependency in init.d script. Syptoms: After reboot slave's xcp does not work: xe (anything): The host failed to acquire an IP address on its management interface and therefore cannot contact the master. log:

Hi all, Version 1.2 of the XCP migration utility is now available at: http://www.xen.org/products/cloud_projects.html Release highlight is the ability to migrate PV VMs that load kernel/ramdisk from the Dom0(without pygrub). In order for the script to automatically SFTP the kernel/ramdisk to the server( using --sftp ), you will need the paramiko module: http://www.lag.net/paramiko. You can

Package: xcp-xapi Version: 1.3-16 Severity: normal Tags: patch Dear Maintainer, Path to "xe" program in /usr/lib/xcp/bin/xe-mount-iso-sr should be: XE="/usr/bin/xe" HTH, David -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/8 CPU cores)