similar to: help a newbie please

Hello everybody! My server with Ubuntu Hardy Heron x64 with Xen 3.2 hangs on when booting at "Starting local boot scripts (/etc/rc.local)". My /etc/rc.local is default and I can''t find out why it stops there. It''s possible to SSH to the server and everything works fine. I just can''t do anything from the physical server. I''ve googled but nothing have

hi xen cracks :-) i managed sucessfully to install xen4 on a debian 6.0 squeeze amd64 box, running 3 hosts windows 2008r2 server and 1 host squeeze. i use a hp server dl 160g6 dual processor with 48gb ram and 2 tb disks with sw raid 1. i have an indentical hardware box to setup remus. now, the problem is, i cant find remus on my box, like i saw it in several descriptions: /usr/bin/remus!

I''m still trying to figure out how to get my Xen installation on a 34-CPU machine (8 quad cores) to recognize more than one CPU per socket. It seems to default to one CPU per socket on this machine. Win2003ServerEnterprise will support 8 quad cores (32 CPUs) in a native install, but I can''t fathom why it won''t when installed under Xen (OpenSuSE11.0). Thanks for any

Hi, I have been testing XenServer 4.1 and I have migrated to Xen 3.2.1 due to the lack of PCI passthrough in Citrix XenServer. I''ve spent 6 hours this evening installing backports packages and/or compiling the source in a fresh Debian Etch install. But still my DomU is crashing. I suspect I have too many versions floating around now so I will try again from scratch. What is the simplest

Hi all, I have been having an issue for over a year with several Xen installations and have not been able to find out if this is just something I am missing. Basically I am trying to configure a firewall with two ethernet cards in a domU using pci passthrough. I am hiding the Ethernet cards at boot time via the pciback.hide kernel option. Right now I am running Xen 3.3.0 and the two Ethernet

Hi, I seem to remember that there used to be ISO downloads of Xen available, for people wanting to give it an easy way for a test drive, and to submit (automated) feedback on which machines and configurations Xen ran (in)correctly. However, I do not seem to be able to find these ISO images for download at Xen.org anymore. Has the project stopped making these useful test images - and if so, why ?

Hi, I seem to remember that there used to be ISO downloads of Xen available, for people wanting to give it an easy way for a test drive, and to submit (automated) feedback on which machines and configurations Xen ran (in)correctly. However, I do not seem to be able to find these ISO images for download at Xen.org anymore. Has the project stopped making these useful test images - and if so, why ?

Where to find xen images? If exist _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi all,     I want to recompile the 2.6.24.19-xen kernel provided by Ubuntu hardy. I have install the linux-source linux-header deb but don''t know how to include the "xen patch" to the 2.6.24 source (I know 2.6.24 have Xen forward-ported) and compile the kernel. I am sorry this is quite a newbie question.. Could anyone help me?     Basically I want to compile a 2.6.24 Xen

Hi Friends, I just installed xen/dom0 on my amd64 quad core phenom processor. dom0 boot up was successfull. When I used ''xm create -c /home/guest.conf'' to create a xen guest, the guest screen hanged after "Starting local". Im not getting the login prompt. Please help me solve this. Im just one step away from a normal guest bootup. My guest fstab,

Hi Xen-users, I am trying to boot of my fist guest domain. The below attached message was thrown on the screen. I am not quite sure that the below information is sufficient to root cause the issue. Where do i look for additional logs to root cause the issue. Appreciate any info that you think might be useful. Thanks, Karthik xm create -c guest1.conf vmid=2 Using config file

Hi, After the discussions of the last week about the topic of dom0 support, and being fairly sure there is no working solution in any distribution, I've been shown a working dom0 with Ubuntu, with 2.6.24-20. I actually did not believe this would work, and stated I'd not believe it until seeing it - and I saw it some minutes later, Ubuntu 7.10 booting dom0 with 2.6.24-20. No idea what

I''m trying to install Xen 3.0.4 But It couldn''t mount root filesystem. I''m using the board, loads AMD SB750 chipset. I''m guessing the reason that is the lack of sata driver in 2.6.16.33-xen. So, when I copy libata and ata_piix driver from other driver from compatible kernel source, could it be running well? And, could you advice about copying drivers?

Hi @all, I have many domU on my server and they work fine, some of them have their own NICs with the PCI param in the config. Now I try to bring a soundcard for asterisk into a new domU and have the following trouble: rz3-ta:~ # lspci 00:00.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) PCI: Enabling device 0000:00:00.0 (0000 -> 0001) EMU10K1_Audigy: probe of 0000:00:00.0

I downloaded xen-3.2.1.tar.gz from xen.org, installed all dependencies and make world on ubuntu hardy. It compiles fine until the errors below.... ------------------------------------------------------ ... ... install -m0644 -p include/public/foreign/*.h /usr/local/src/xen-3.2.1/dist/install/usr/include/xen/foreign install -m0644 -p include/public/COPYING

I have successfully passed through a video card, network card, USB mouse, and USB keyboard to a MS Vista guest. That works well. I am trying to add another PCI device, such as a audio card or PCI USB hub, but I am running into a strange problem. When I plug the PCI audio (or USB card) to the motherboard. It makes it so that the PCI video card is no longer an "assignable device" (xm

Hi folks: I''m having the exact problem with /sbin/init described at http://lists.xensource.com/archives/html/xen-users/2007-04/msg00570.html The environment is CentOS but the problem and the steps I''ve taken are exactly the same. The guest''s fstab is dev/sda10 / ext3 defaults 1 1 tmpfs /dev/shm tmpfs

Hi,all, when I download xen3.2.1 source code from this url: http://bits.xensource.com/oss-xen/release/3.2.1/xen-3.2.1.tar.gz then I want compile it on my Debian testing(kernel 2.6.24-1-686) when I run this command to compile xen0''s kernel, #make linux-2.6-xen-config CONFIGMODE=menuconfig make -f buildconfigs/mk.linux-2.6-xen config make[1]: Entering directory

I just downloaded Xen-4.1.1 from xen.org, compiled it, and installed it. I then compiled kernel 3.0.0 and added the hypervisor and dom0 kernel in a grub 2 entry. After booting, I executed "xl list," to confirm the hypervisor was running. I was greeted with this message: libxl: error: libxl.c:56:libxl_ctx_init Is xenstore daemon running? failed to stat /var/run/xenstored.pid: No such

Hai, I am using dell insprion 580 machine for xen installation and dom0 configuation. I compiled xen source code and configured the kernal. Grub entry given below menuentry ''Xen 4.0.0-rc8 / Ubuntu 10.4 kernel 2.6.32.25 pvops'' { insmod ext2 set root=''(hd0,3)'' multiboot (hd0,3)/boot/xen-4.0.0-rc8.gz module (hd0,3)/boot/vmlinuz-2.6.32.25 dummy=dummy