similar to: Xen domU crashes accessing to drbd disk if using maxmem.

Hi all, I'm having problems with a vm's startup, I cloned the entire disk of a Windows 2000 with dd on a drbd device, that disk was configured with two partitions. I'm able to see all the partitions contents by using kpartx and mount them: # kpartx -l /dev/drbd0 drbd0p1 : 0 202751488 /dev/drbd0 32 drbd0p2 : 0 285567360 /dev/drbd0 202751520 The problem is that when i try to startup

While installing DomU via debootstrap method I got the following error in my /var/log/xen-tools/mydomU logs Can not write log, openpty() failed (/dev/pts not mounted?) and when I tried to run xm console mydomU I got /usr/lib/xen-tools/jaunty.d# xm console mydomU Error: Domain ''mydomU'' does not exist. now what is the meaning of above error I want to resolve it and proceed

so I've had a drbd replica running for a while of a 16TB raid thats used as a backuppc repository. when I have rebooted the backuppc server, the replica doesn't seem to auto-restart til I do it manually, and the backupc /data file system on this 16TB LUN doesn't seem to automount, either. I've rebooted this thing a few times in the 18 months or so its been running... not

Hi, First of all, I'm new to ocfs2 and drbd. I set up two identical servers (Athlon64, 1GB RAM, GB-Ethernet) with Debian Etch, compiled my own kernel (2.6.16.20), then compiled the drbd-modules and ocfs (modules and tools) from source. The process of getting everything up and running was very easy. I have one big 140GB partition that is synced with drbd (in c-mode) and has an ocfs2

I am running a two-node web cluster on OCFS2 via DRBD Primary/Primary (v8.3.8) and Pacemaker. Everything seems to be working great, except during testing of hard-boot scenarios. Whenever I hard-boot one of the nodes, the other node is successfully fenced and marked ?Outdated? * <resource minor="0" cs="WFConnection" ro1="Primary" ro2="Unknown"

Hi all, I am using OCFS2-1.4.7 for 2 servers which is running Red hat enterprise 5.7 kernel 2.6.18-274.el5. OCFS2 I use for drdb for replicating master-master. My 2 servers was installed HA-Proxy. Yesterday, server web1 was down with the log kernel panic. And today, web2 was down too. After that, I trace the log file on these server and found that the reason from ocfs2. The log

Hi all. I have two hosts with drbd: kmod-drbd83-8.3.8-1.el5.centos drbd83-8.3.8-1.el5.centos and kernel (CentOS 5.7): 2.6.18-308.4.1.el5 After a recent upgrade of kernel I have had two sitiuations when my ext3 filesystem on /dev/drbd0 became read-only. I've checked disks with smartctl -t long, they are ok. There are no messages with disks problems in /var/log/messages | dmesg. I've made

Hello List, i am running Debian Squeeze and i installed DRBD, 3.2.0-0.bpo.4-amd64 and Xen4.0 from the Backports. Sometimes i get such ugly Kernel message: [257318.441757] BUG: unable to handle kernel paging request at ffff880025f19000 Log: [256820.643918] xen-blkback:ring-ref 772, event-channel 16, protocol 1 (x86_64-abi) [256830.802492] vif86.0: no IPv6 routers present [256835.674481]

Hi, Sorry for the need of the long winded email. Looking for some answers to the following. I am setting up a xen PV domU on top of a LVM partitioned DRBD device. Everything was going just fine until I tried to test the filesystems in the domU. Here is my setup; Dom0 OS: CentOS release 5 (Final) Kernel: 2.6.18-8.1.4.el5.centos.plusxen Xen: xen-3.0.3-25.0.3.el5 DRBD:

Hello We have an ocfs2 1.6 via drbd dual master. drbd0 -> sda7 (node1) drbd0 -> sda7 (node2) ocfs2 1.6 2.6.38-2-amd64 kernel panic when unmount. when unmount drbd0 on both node around the same time using dsh. umount -v /dev/drbd0 the umount process hangs for a while, 30mins or so pts/0 D+ 20:50 0:00 umount /dev/drbd0 -vvvvv Then, one of the node kernel panics Message from

Hello, for some strange reason I can not get quota to work with Samba 3.5.8. The quoata system itself works fine (using "repquota /mountpoint") and via NFS, but Samba does not report the correct free space (df command in smbclient). Instead the real free space on the disk volume is shown to smb clients (tested from Windows and smbclient). The quotasystem in use is the new quota

Hello list, If i take a drbd over two hosts configured as dual primary, i can access files via ocfs2 from both sides. For this, on both sides i'ld have to mount the ocfs2-partition locally and both sides have their own ocfs-DLM, as far as i understood? So in Detail: 1. /dev/drbd0 configured in dual primary, taking one partition from each host 2. drbd0 is ocfs2 formatted 3. ocfs2-tools are

a previously rock solid reliable server of mine crashed last night, the server was still running but eth0, a Intel 82574L using the e1000e driver, went down. The server has a Supermicro X8DTE-F (dual Xeon X5650, yada yada). server is a drbd master, so that was the first thing to notice network issues. Just a couple days ago I ran yum update to the latest, I do this about once a month.

Hiya, I'm new to Centos but learning rapidly but I have been using FreeBSD. I'm trying to setup a HA NFS server using 2 machines. Both machines are running 4.3 updated to the latest via Yum. I did yum groupinstall drbd-heartbeat and yum install kernel-module-drbd-kernel-module-drbd-2.6.9-34.EL to match my kernel. The problem I have is that on 1 machine drbd works fine, but when I start

We're trying to setup a dual-primary DRBD environment, with a shared disk with either OCFS2 or GFS. The environment is a Centos 5.3 with DRBD82 (but also tried with DRBD83 from testing) . Setting up a single primary disk and running bonnie++ on it works. Setting up a dual-primary disk, only mounting it on one node (ext3) and running bonnie++ works When setting up ocfs2 on the /dev/drbd0

We're trying to setup a dual-primary DRBD environment, with a shared disk with either OCFS2 or GFS. The environment is a Centos 5.3 with DRBD82 (but also tried with DRBD83 from testing) . Setting up a single primary disk and running bonnie++ on it works. Setting up a dual-primary disk, only mounting it on one node (ext3) and running bonnie++ works When setting up ocfs2 on the /dev/drbd0

Hi list. I am dealing with DRBD (+GFS as its DLM). GFS configuration needs a CLVMD configuration. So, after syncronized my (two) /dev/drbd0 block devices, I start the clvmd service and try to create a clustered logical volume. I get this: On "alice": [root at alice ~]# pvcreate /dev/drbd0 Physical volume "/dev/drbd0" successfully created [root at alice ~]# vgcreate

Hi, i''ve a problem with drbd 0.7.10 module on an xenU OS (testing). I''ve compiling drbd with "make clean all" then "make install" without error. modprobe drbd OK with no error too and now and trying to start drdb /etc/init.d/drbd start Starting DRBD resources: can not open /dev/drbd0: No such device or address [ d0 can not open /dev/drbd0: No such device

Hi all, Where i want to arrive: 1) having two storage server replicating partition with DRBD 2) exporting via GNBD from the primary server the drbd with GFS2 3) inporting the GNBD on some nodes and mount it with GFS2 Assuming no logical error are done in the last points logic this is the situation: Server 1: LogVol09, DRDB configured as /dev/drbd0 replicated to Server 2. DRBD seems to work

Hello, I have a little trouble when entering into a domU console (xm console mydomU) : i can''t use the CTRL-C sequence to stop a script/command (like a continuous ping for example) Is there any parameter / tip for that ? Arnaud _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users