similar to: Help requested: udev problems with 2.6.18-xen

Package: udev Severity: important X-Debbugs-CC: pkg-xen-devel@lists.alioth.debian.org Hello! When installing the udev package in a Xen domU, ``strange'' things happen. The following is a bit of guesswork, some hard facts are probably missing, but I hope that the udev and / or Xen maintainers can make some sense out of it. I'm for now happy with having a usable Xen server again...

Hi all I recently setup a CentOS 5.2 server, running XEN (using HyperVM), and then moved the hard drive from my test box to my Intel server.The problem I now have, is that it doesn't bootup properly. Shortly after I see the udev service started, the machine reboots. This keeps on going the whole time. I have managed to kill udev on start-up (with CTRL + C), and then it boots up. So, do I

Hello! I've noticed this problem two times now.. last time I fixed it by rebooting the (centos 5.1 x86 32b) xen host/dom0. Symptoms: - Already running domUs (debian 2.6.18-6-xen-686 32b PAE) continue running and working OK - Cannot start new domUs (debian 2.6.18-6-xen-686).. kernel bootup just hangs before running initrd. Same domU with the exact same xen domU cfgfile worked earlier.

Hi Friends, I just installed xen/dom0 on my amd64 quad core phenom processor. dom0 boot up was successfull. When I used ''xm create -c /home/guest.conf'' to create a xen guest, the guest screen hanged after "Starting local". Im not getting the login prompt. Please help me solve this. Im just one step away from a normal guest bootup. My guest fstab,

Package: xen-utils-common Version: 4.0.0-1 Severity: normal A strange issue, when deploying Xen using Puppet, /etc/udev/rules.d/xend.rules and /etc/udev/rules.d/xen-backend.rules files are empty. Specifically, the symlinks point to ../xend.rules and ../xen-backend.rules respectively in /etc/udev, but neither of those files exist. Manually copying those files from another host that was not

Hello list. My server: Gentoo 2.6.21-xen dom0 xen-tools 3.2.1 lvm 2.02.28-r2 udev-115-r1 Symptoms: normally I run 4 domUs. About once a week I have a need to restart a domU. Sometimes it works just fine, but other times it does not and I''ll get a message back saying "Error: Device 0 (vif) could not be connected. Hotplug scripts not working". The domU config file has not

Stripped out the HAL support code and replaced with calls to udev. The remainder of the code to extract CPU details parses through the /proc/cpuinfo file since udev/sysfs will not return such information. Signed-off-by: Darryl L. Pierce <dpierce at redhat.com> --- configure.ac | 3 +- src/Makefile.am | 4 +- src/processors.cpp | 94

Package: xen-hypervisor-3.0.3-1-i386 Version: 3.0.3-0-2 Severity: important When I try to start a domU with more than 6 vdb it crash. The first time the vm does not launch and aparently wait for the loop device creation (some scripts/block add, udev --daemon and sleep 1 process running). And nothing happen until I Ctrl+C the xm create. My loop module is loaded with 64 loops. After this first

Situation: Running a simple UDP client/server program where the client on one domU on one computer sends echo packets to another domU on another computer, server sends echoes back. They do this on a specified port (will use any port between 5000-6000). This program works on non-Xen machines in various environments, Linux and Solaris. Program just hangs on the domUs. I believe I need help with

Hi just rebooted my centos server with a zaptel TDM400 card in one of the PCI slots when the card is in the machine hangs at "Starting udev" using either 2.6.18-53.1.4.e15 or 2.6.18-53.e15 kernels, has anyone come acroos this problem before if so how did you fix it Thanks in advance for any help Ronn

Hello, I note the following message on my testing domUs: Preparing to replace udev 149-2 (using .../archives/udev_150-2_i386.deb) ... Since release 150, udev requires that support for the CONFIG_SYSFS_DEPRECATED feature is disabled in the running kernel. Please upgrade your kernel before or while upgrading udev. Is it anything to worry about? Will there

Hello, I have been playing around with Remus on Xen 4.0.1, attempting to fail-over for an HVM domU. I''ve run into some problems that I think could be related to tapdisk2 and its interaction with how one sets up Remus disk replication in the domU config file. A few things I''ve noticed: -The tap:remus:backupHostIP:port|aio:imagePath notation does not work for me, although this

I have a dom0 machine running CentOS 5.4 with all the latest updates using Xen as my hypervisor. I am using Xen in part because this machine was set up prior to KVM being included in RHEL, and in part because KVM's network bridging configuration is not nearly as simple as Xen's. The dom0 machine is a headless Mac Mini and I do all of my VM management via virsh from the command line. I

Hi, I have problems getting lvm to work on my domU. The dom0 is a CentOS 5 installed on lvm. I''ve added two extra lv, one for root and one for swap. [root@surr log]# lvscan ACTIVE ''/dev/VolGroup00/dom0vol'' [3.91 GB] inherit ACTIVE ''/dev/VolGroup00/dom0swap'' [1.94 GB] inherit ACTIVE

Hello Can anyone share a known working config for xen which would transfer a serial interface ( add-on card preferably, mine uses e880-e887 : 0000:03:05.0 / ec00-ec07 : 0000:03:05.0 ) to a DomU ? I've been trying with the stock packages from Centos 5.5 ( fully updated) and also with gitco's 3.4.3 but after 2 days of googling and testing we still fail to access the serial

Hello, I''m using Debian Lenny with Xen 4.0.1 with standard 2.6.32.25 kernel In my new server after some period of running I got 100% usage of udev process and I can''t stop it. I upgraded to the newest libc and udev but the problem is here again. Here dmesg and pastebin http://pastebin.com/JNJPFSHz [1] [229995.580221] ------------[ cut here

We have tested the latest xen on VT platform with Intel 965/5000P chipset. Here is the test summary: Bug has been fixed: ========================== 1).VMX domains fail to reboot bug has been fixed. Issues: ========================== 1) VBD driver does not work well http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=831 2) Only one vCPU is found in SMP xenU guest OS

We have tested the latest xen on VT platform with Intel 915/E8500 chipset. Three platforms (32/PAE/32E) test all are based on SMP, It means that we boot up SMP guest OS in VMX. Here is the test summary: New issue ================================================ No new issue Issues List: ================================================ 1) IA32E/PAE: 32bit Vista RTM network doesn''t

Hi, I am trying a setup with a Linux Xen Dom0 on which runs an OpenSolaris 2008.05 DomU. I have 8 hard disk partitions that I exported to the DomU (they are visible as c4d[1-8]p0) I have created a raidz2 pool on these virtual disks. Now, if I shutdown the system and I start it again, the pool is not automatically imported during the boot. If I type zpool status, I can''t see it, so I do a

Hi, I have been trying to figure out why my Supermicro X7DWA-N with dual Xeon E5420''s locks up occasionally when running Xen, I''ve tried 3.2.1 and 3.3 with the Xensource 2.6.18 kernel, with gentoo 2.6.21, and 2.6.25 and 2.6.27 kernels patched with suse xen patches, every single combination suffers from occasional lockups :(, I am reasonably confident that the hardware is ok