similar to: VGA passthrough - guest shows blank screen on startup

Hi All, When tried to pass through 2 mpt2sas HBA to hvm guest, hvmloader paused with below: MPT BIOS Fault 09h encountered at adapter PCI(00h,04h,00h) Press any key to continue... Checked related codes and mostly like it caused by rombios did not loaded MPT BIOS properly, and lead MPT BIOS failed to bootup. config-file of the guest as below: ---------------------------------- # cat vm.cfg

On 7/28/2016 3:41 PM, Fawzy Ibrahim wrote: > LSI SATA MEGARAID 95Q9 afaik, the megaraid cards are mostly all SAS, which support SATA drives, except very old ones were SCSI. Ok, I do see they had a series of MegaRAID SATA 150-xx and 300-xx cards, these were 64 bit PCI or PCI-X cards. 95Q9 does not appear to be a valid card number, 9240, 9260, 9280 are some pci-express SAS MegaRaid

Hi all I can''t seem to find any information on vga-passthrough when booting through xen.efi, so I assume it should work. But I encounter a problem on a windows 7 HVM that boots fine when dom0 is booted through MBR but fails when dom0 is booted through UEFI. My system is: DQ77KB motherboard with bios version 44 Core i7-3779T with VT-d Intel HD graphics 4000 In the qemu log it

Hi xen developers, Does any of you know how to disable the cirrus-vga emulation for hvm in xen? I have been trying to disable that from the source codes, but even with that, I still see a VGA controller when I boot up my guest domain. In particular, I would like to do this because I am passing through a graphics card to my guest domain using direct pass through. Thanks, - billy

Hi all I''m trying to enable VGA passthrough in linux domU without success. I want to pass through AMD Radeon HD 4850 - 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850] as a _primary_ VGA for the VM. Nothing is showing up on the monitor that I have connected to graphics card''s HDMI port. I have IOMMU enabled. I searched mailing lists

we have just upgraded to xen4.0+kernel2.6.31.13. however, we fonud that disk offline in high disk IO(xen4.0+kernel2.6.31.13). but whitout xen4.0, we only start with kernel2.6.31.13, the disk offline didn''t happen. I think it is a bug. test case: 57 physical machine we start 5 vm(cpu:2, memory:1024) in a physical machine.at the same time we do decompression in dom0. tar xzvf *.tar.gz tar

I obtain this error when booting (xen/stable-2.6.31.x|xen/master) on Xen 3.4.2 x86_64 xen_major : 3 xen_minor : 4 xen_extra : .2 I had no errors with the same kernel, version of the day 2010-03-03 To compile the kernel i use this configuration " http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.31.6-pvops-dom0-xen-master-x86_64 "

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

# lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) 00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI

On 7/30/2016 6:56 AM, Fawzy Ibrhim wrote: > # lspci -nn > 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) > 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) > 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) >

Hi, I have HP DL 180 G6 2U Server loaded with CentOS 5.6. Can someone please suggest any good Hardware Raid Controller Card for the mentioned Hardware and OS. The reason being this server comes with Onboard Sata Controller chipset (HP Smart Array B110i Controller). This server has SATA Harddrive - 4 Nos of 500GB each and the OS doesnot detect it. 00:1f.2 SATA controller: Intel Corporation

Sorry to duplicate my issues onto the list - I thought I had looked through this thread before and seen a different error, but apparently Adam and I are running into much the same thing. I'm seeing exactly the same "Failed to assign device to IOMMU" along with the "Device not owned by PCI Back End or pci-stub" in these scenarios. I have not gone back to previous versions,

I just built 4.3.0 in order to get > 2GB of RAM in domU with GPU passthrough without crashes. Unfortunately, the same crashes still happen. Massive frame buffer corruption on domU before it locks up solid. It seems the PCI memory stomp is still happening. I am using qemu-dm, as I did on Xen 4.2.x. So whatever fix for this went into 4.3.0 didn''t fix it for me. Passing less than 2GB

I have begun to see these messages in my morning reports: WARNING: Kernel Errors Present pciehp 0000:00:1c.0:pcie04: Link Training Error occurs ...: 146 Time(s) pciehp 0ng Error occurs ...: 1 Time(s) pcieport 0000:00:1c.0: bridge window [mem 0xd0a000000.0 failed with error -22 ...: 1 Time(s) r8168: probe of 0000:01:00.0 failed with error -22 ...: 702 Time(s) r8168:

Hello, I''m hoping someone may be able to push us in the right direction. I''m trying to get one of our products to work with the current branch of Xen (4.0/4.0.0) but I''m hitting a problem. We are currently using Xen 3.3.2 on a Sun Blade 600 chassis (with x6270 blades) this works great. But when we upgrade to Xen 4.0/4.0.1 we get the following message when

With the kernel option ''xen-pciback.hide=(00:14.2) xen-pciback.permissive'', Xen-4.2.0-rc3 is unable to pass through my onboard Intel HDA audio adapter to a Windows7 guest. I tried doing the same in KVM and it worked immediately without issue. On the guest, I get a "High Definition Audio Controller" with the correct vendor/device ID, and an error of "This device

On Apr 3, 2014, at 3:40 PM, Adam Pribyl wrote: > I have nut 2.6.4-2.3+deb7u1 on debian 7 32bit, with UPS Eaton Nova AVR 1250 connected via USB. Which kernel version? > It happens several times a day that I get a message about > > Apr 3 16:41:49 kernel: [422581.049671] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -110 > Apr 3 16:41:54 kernel:

Hi there, I have a question regarding PCI passthrough on the Citrix XenServer 5.6 (Xen 3.4.2). I already managed to get some soundcard passed through to a Windows guest. So I think my knowledge about that topic isn''t _that_ low. But I cannot seem to pass through a SATA/PATA controller to a Linux guest. I have some additional CD/DVD burner (PATA) attached to a SATA/PATA controller

Oh yes you can run XEN on VB. I am running the following config: ========= GUEST ========= [root@xenserver ~]# cat /etc/issue Citrix XenCloudPlatform Host 0.1.1-25823p [root@xenserver ~]# uname -a Linux xenserver 2.6.27.42-0.1.1.xs0.1.1.737.1065xen #1 SMP Fri Jan 15 16:20:16 EST 2010 i686 athlon i386 GNU/Linux ======== HOST ======== OS Name: Microsoft Windows 7 Ultimate OS

I have nut 2.6.4-2.3+deb7u1 on debian 7 32bit, with UPS Eaton Nova AVR 1250 connected via USB. It happens several times a day that I get a message about Apr 3 16:41:49 kernel: [422581.049671] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -110 Apr 3 16:41:54 kernel: [422586.041057] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 3 ret