similar to: Slow network speed with Xen 3.2-1

Hello, I hope that somebody can help me, I am trying to boot Knoppix from the third parition of an ipod nano with out loosing the player capabilities. After fdisk I have the following partitions: slr ~ # fdisk -l /dev/sda Disk /dev/sda: 4095 MB, 4095737344 bytes 255 heads, 63 sectors/track, 497 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End

Hi all: I am pretty new to xen, but ,thanks to you, I am learning fast :) I have a Dell Poweredge 2950 server running Debian Lenny as Dom0 named Asgard I have configured three DomU (Loki, Hermod and Thor) with DHCP support. All the machines (Dom0 and DomU''s) ask for an IP address to a DHCP server in the Office LAN. The DHCP server is configured to bind certain IP addresses to the Dom0

I am looking for a kernel boot option that specifies "nonetwork" I have found in searching the nousb - nopcmcia etc.... but I have not found one for nonetwork. Is there one and what is it called? Thanks, Jerry

Hi, I installed one debian HVM guest (VT virtualization). I didnt configured the network (I dont know if it is related to my problem): When I start the domU , I received this error: desktop:/etc/xen# xm create -c debian-web.cfg Using config file "./debian-web.cfg". Started domain debian-web xenconsole: Could not read tty from store: No such file or directory Here is my cfg: kernel

I found a bug in the nouveau kernel module. It looks like a cut and paste error on the definitions of some module parameters in nouveau_drv.c. The bug exhibits when displaying module parameter information with the modinfo utility. Here's a patch: diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.c b/drivers/gpu/drm/nouveau/nouveau_drv.c index da3b93b..874adf5 100644 ---

Hi, I''m using VNC to show vm''s linux boot. I see lines like [ 1.053298] EXT3-fs: INFO: recovery required on readonly filesystem. [ 1.053686] EXT3-fs: write access will be enabled during recovery. [ 1.494490] kjournald starting. Commit interval 5 seconds etc. But à the end of booting, it stop. No prompt login. With "xm console vm" I have the boot login. I

Hello, I successfuly run Centos 5.1 domU in Centos 5.1 dom0. But I still have some minor issues/errors/warnings while booting I'd like to fix and here are my questions: 1. How to disable loading usb host controler module: [...from dmesg... ] Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 insmod: error inserting '/lib/uhci-hcd.ko': -1 No such

Hi, In the installation docs for a Solaris Xen 07/07 DomU (http://www.opensolaris.org/os/community/xen/docs/install-solaris-domu-iso.htm) the config file for the Solaris DomU is name = "solaris-install" memory = "1024" disk = [ ''file:/ws/public/isos/65-0604-nd.iso,6:cdrom,r'', ''file:/export/root/solaris_domu/disk.img,0,w'' ] vif = [

Hi, I have a 2-node replica volume running with GlusterFS 3.3.2 on Centos 6.4. I want to shut down one of the gluster servers for maintenance. Any best practice that is to be followed while turning off a server in terms of services etc. Or can I just shut down the server. ? Thanks & Regards, Bobby Jacob -------------- next part -------------- An HTML attachment was scrubbed... URL:

noaccel=1 disables all acceleration and doesn't even attempt initialising PGRAPH+PFIFO, nofbaccel=1 only makes fbcon unaccelerated. Signed-off-by: Marcin Ko?cielnicki <koriakin at 0x04.net> --- drivers/gpu/drm/nouveau/nouveau_drv.c | 8 +++++++ drivers/gpu/drm/nouveau/nouveau_drv.h | 2 + drivers/gpu/drm/nouveau/nouveau_fbcon.c | 10 ++++++--

Hi! It''s me again bothering you guys, what I want to do is to give full bandwidth to VPN traffic and limit the rest to 30KB/s (kilobytespersecond), ok? Here''s what I have: tcclasses ################################## eth0 1 1kbps 70kbps 1 eth0 2 1kbps 30kbps 2 default eth1 3 15kbps 10000kbps 1 eth1 4

Has anyone yet tried PXE booting the vmlinuz/initrd.img set from Centos 4.0beta2? I have a pxelinux setup that is booting 3.4 PXE images fine, but the equivalent setup for 4.0beta loads the kernel and then splashes the monitor full of multicolor random characters. Not a good start to an install... Anyone had luck? Any changes for PXE boots known for 4.0? Thanks in advance. -Alan

Hi. I've recently picked up a 256MB compact flash card and CF->IDE adapter. I'm wanting to put a smaller version of knoppix on here. I came across miniknoppix here: http://www.inittab.org and decided to have a play around with that. So far I have opened up the ISO image and copied all the files out. I have put a boot sector onto the CF by putting the CF into the IDER adpater then

Hello! I''ve got CentOS 5.3 x64 as dom0 and the same OS for domU. I''ve installed it using the following manual: http://www.howtoforge.com/centos_5.0_xen Guest image was taken from stacklet.com Unfortunately, I can''t make domU working with public static IP. When I use bridged networking, the guest don''t have network connection at all. When I use routed

Hi all, I have been having an issue for over a year with several Xen installations and have not been able to find out if this is just something I am missing. Basically I am trying to configure a firewall with two ethernet cards in a domU using pci passthrough. I am hiding the Ethernet cards at boot time via the pciback.hide kernel option. Right now I am running Xen 3.3.0 and the two Ethernet

Hello, I would like to use the kernel in the domU, so that a user can install it's own kernel. While starting the domU with pygrub I get the following error: "Error: Boot loader didn't return any data!" This is the configfile of the domU: -------------- # # Configuration file for the Xen instance lenny.vandervlis.nl, created # by xen-tools 3.9 on Sun Oct 19 15:46:03 2008. # #

Roger, I did and it didnt work. Hence why I was trying to run just the shell script manually. I am not sure if this works though with the timer defined in it? Cheers, James Date: Mon, 27 Apr 2015 15:03:44 +0200 From: roger at rogerprice.org To: nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] upssched setup On Mon, 27 Apr 2015, James Hammond wrote: > I am unable to get

Dear All, I''m using the kernel 2.6.6, iproute2-2.4.7.20020116, iptables v1.2.9, and gentoo. I have a leased-line 64 kbps. I can see the counter works in iptables, but in the htb, it doesn''t go to the right class (it always go to the default class). Any help will be appreciated here''s my htb conf #!/bin/bash tc qdisc del dev eth1 root tc qdisc add dev eth1 root

Hi. I have some issues after rebooting the system. First, I would like to show you how I have installed XEN. S.O: Debian Lenny Installation: By default without additional packets So, I installed XEN # aptitude install xen-hypervisor-i386 libc6-xen xen-utils xen-tools bridge-utils # aptitude install xen-linux-system-2.6.26-2-xen-686 # nano /etc/modules loop max_loop=128 # nano

I''m running Xen 3.2 on Debian 5.0 (Lenny) and am having trouble booting up a Debian Etch DomU. It hangs at the end when it says "Starting periodic command scheduler: cron." It''s just completely frozen. At one point I set it sit for a few hours and got back into the console and it said something about "time went backwards" but I used the