similar to: AW: xenified 2.6.29 ready to use tar.gz

Andy, OSOL 2009.06 been installed in stub domain (hvm domain) at mentioned Dom0 with 2.6.30 xenified kernel via xen-patches-2.6.30-2.tar.bz2 refuse to activate PV drivers. When same Dom0 starts with 2.6.29.4 xenified kernel (xen-patches-2.6.29-6.tar.bz2) kernel OSOL 2009.06 in stub (hvm) domain does activate PV drivers for xdf, xnf . Boris

Setting CONFIG_CMDLINE_BOOL=y in .config allows to assign desired value via make menuconfig: Symbol: CMDLINE [=root=/dev/sda14 ro console=tty0]                                                       Prompt: Built-in kernel command string                                                                       Defined at

Hi, I am sucesfully running 2.6.30 xenified kernel: Machine DELL Optiplex 960 CPU intel E8400 8GB RAM Debian lenny 5.0 x64 Xen 3.4.1 rc11 + kernel 2.6.30.2 xenified thanks to howto from bderzhavets: http://bderzhavets.wordpress.com/2009/07/07/building-xenified-2-6-30-1-kernel-via-xen-patches-2-6-30-2-tar-bz2/ So far running ok. 1) I am not able to resolve issue while booting xenified

Hello, I regularly perform benchmarks of Xen/KVM systems. When Xen 3.4.3 was released I started another benchmark and found out that the xenified kernel 2.6.31-r14 from Andrew Lyon had serious performance breakdowns when used with Xen 3.4.3 or Xen 4.0.0 but not with Xen 3.4.2. The benchmark measures compiling apache 2.2.15 under gentoo. What could be the reason? date: 02.06.2010 time emerge

Following bellow procedure involves Solaris Kernel module debugger to patch OSOL’s (SNV_111b) kernel at booting up to succeed with dhcp lease and to be able proceed with initial install. File /etc/system gets updated via root terminal session before standard reboot to make the patch for kernel permanent

Hello,   I can say that I have searched the entire ''world wide web'' and still haven''t found ''complete  and clear answers'' to the often asked question of: Given a Xen (release) build (say 3.2.0), which by default tries to get and build and assume Linux kernel-xen 2.6.18 from the mercurial repository, HOW TO override the build and make it work with a

Hello all, I compiled the kernel with the xen patch and I seam to have trouble with some kernel modules, like ATI''s proprietary driver. The system seams considerably slower than before, this might be because of the video drivers, or maybe the RAM alocated to dom0 (512Mb instead of it''s usual 1Gb). When I try to run xend, it dies with a SIG 15. I attached the log file. Anyone

Hi, I just want to know if somebody use 2.6.31.4 xenified kernel (aka OpenSUSE) in production? We have been testing it on new Nehalem Xeon server for few weeks w/o any problem. But as soon we tried it on production machine - after several production domUs started - hard OS failure. We had to switch back to 2.6.18.8 - xen stock kernel. Peter _______________________________________________

Known bug for 32-bit. Workaround is on the net. http://mulps.wordpress.com/2009/05/29/compiling-xen-kernel-2-6-29-2/ Boris ________________________________ From: Mehdi Sheikhalishahi <mehdi.alishahi@gmail.com> To: bderzhavets@yahoo.com Sent: Sun, January 3, 2010 4:25:00 PM Subject: Xenified linux kernel Hi Dear: I am refering to the

Hi all,   I install Xen on a fresh Ubuntu 9.04 from source. During the code runing it shows usually "Warning: not literal format or no paramaters". By "make" linux kernel after 1 hours code running it ends with: (The installation steps is shown below)   --------------------------------------------------------------------------- WARNING: modpost: Found 1 section mismatch(es). To

Hello, im struggling with getting a Fedora 11 Domu up and running. My Host is a HP DL380 g6 with CentOS 5.5 and XEN 4 from gitco installed. The System runs several Linux-PV-DomUs like Debian Lenny, Ubuntu Lucid and CentOS-55 without any problems. But if i try to get stock F11 up and running. Using Virt-install, xm create with KS-Install and Converting a working HVM-Install did not suceed. The

Hi, to make transitions more convenient, I've done this by using uuid instead of device names. If you ls -l /dev/disk/by-uuid inside your domU, you'll see something like lrwxrwxrwx 1 root root 10 5. Mai 07:38 39a2a64b-0716-47ad-92f4-a7437cac54ee -> ../../sda2 lrwxrwxrwx 1 root root 10 5. Mai 07:38 e8b97b59-a790-417c-8231-fe8da8b6e6ee -> ../../sda1 In /etc/fstab inside the domU,

Hi All I am having 2 very long character strings (550chars) and I want to put them as expressions together with c(). The problem is that I also get these double-quotes, as seen below in 'fct'. How can I remove these double-quotes? I tried as.name() but it did not work (because of size?). These are creating trouble with subsequent programs, which I tested with strings that for some

Hi, I am considering installing several `servers' in a facility that needs to conform with the products listed at: DSD Approved Products http://www.dsd.gov.au/infosec/evaluation_services/epl/dap.html As far as i can see freebsd performs above and beyond, for all the required criteria in the act. Can we see freebsd listed as an approved product in the near future? Best Regards, Jason - RF

I figured it out. The ftp site was not named well and corrected. The other problem I have it after the extraction and make; it was suppose to go under /etc but that did not happen. I am trying to figure out why. On 12/28/07, broadband Voice <broadbandvoice at gmail.com> wrote: > > I successfully downloaded the Asterisk package from Digium but not able > tar zxvf zaptel-*.tar.gz.

Hello, I am having a problem with the second-generation of a custom isolinux boot CD for one of the PCs here in the lab. We have three types of PC here - two Dells and one from SGI (a SGI 230). The previous version of the custom bootcd still works on all three platforms. The new version only works on the Dells. It fails on only the SGIs with:

Hi All, Can anybody suggests where can I find source code of bridge control utility (brctl).(bridge-utils-0.9.5.tar.gz) Regards _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

Bonjour, comment est-ce que je fait pour installer wxruby1.9.7? Je ne peut plus l''installer à partir de rubygems. J''ai télécharger "wxruby-1.9.7.tar.gz" et après que faut-il faire? merci sebastien http://beusse.liveror.com/ _______________________________________________ wxruby-users mailing list wxruby-users@rubyforge.org

On Mon, 7 May 2001, Lawrence Greenfield wrote: > Date: Mon, 7 May 2001 13:37:42 -0300 (ADT) > From: "Marc G. Fournier" <marc.fournier@acadiau.ca> > > [...] > If I do an 'saslpasswd -d marc' to remove myself from the sasldb file, > then try and re-connect with pine, I get the following error: > > May 7 13:21:00 new-relay imapd[66067]:

First, thanks for your attention! I''m trying to install UltraSphinx plugin from svn but unfortunately it''s down. I have a .tar.gz package, how can i install it? ./script/install package.tar.gz - doesn''t work -- Regards, Luiz Vitor Martinez Cardoso cel.: (11) 8187-8662 blog: rubz.org engineer student at maua.br --~--~---------~--~----~------------~-------~--~----~