similar to: dell poweredge 2900 III dom0 crashes unexpectecdly

The issues I''ve had with PE2650 and Linux in general all related to a lack of IRQ''s. I had to disable all non-essential devices in the BIOS (lpt, usb and com). It seems the BIOS on that server still has legacy IRQ issues (< IRQ15). In my xenU''s I also renamed /etc/sysconf/hwconf so it would''nt try to init any hardware devices directly. Maybe these options

After 4 days of agrevation I felt it was best I post to the list before I break something or hurt myself. It seems that 2.6 from other posts seemed to kill support for this card in particular since LSI has EOL'd it. Although I've managed to download megaraid-2.00.3 which does support this card and build an object on a sperate box. Although the installer seems to require a driver disk and

Hello, I noticed the default megaraid_sas driver version in upstream Linux 2.6.32.25 is pretty old, version 4.01, and it seems to be very buggy. It fails to bring up disks and boot fails. Many people have reported this issue on various hardware using LSI RAID adapters, and on various Dell servers (R310/R410/R510/R710) using Dell PERC H700 RAID adapters (which are rebranded LSI adapters).

Hello, I noticed the default megaraid_sas driver version in upstream Linux 2.6.32.25 is pretty old, version 4.01, and it seems to be very buggy. It fails to bring up disks and boot fails. Many people have reported this issue on various hardware using LSI RAID adapters, and on various Dell servers (R310/R410/R510/R710) using Dell PERC H700 RAID adapters (which are rebranded LSI adapters).

The raid card is an Adaptec 2100S. -----Original Message----- From: Josh Paetzel [mailto:josh at tcbug.org] Sent: Saturday, November 11, 2006 9:35 AM To: tclug-list at mn-linux.org; pjcrump at bitstream.net Subject: Re: [tclug-list] Drives Not Recognized on Dell Poweredge 1550 CentOs install On Saturday 11 November 2006 01:20, Phillip Crump wrote: > I have a new (used)Dell Poweredge 1550

I''ve got Solaris 10 U6 with a ZFS boot/root installed on a Dell 1850 here, patched up as of this morning (kernel 141415-10). The system is running with hardware-mirrored disks, via the LSI MegaRAID controller, a PERC 4e/Si. 4G of RAM, one dual-core 3.4GHz CPU. The system is a simple mail hub, and it does the task very well. Most files exist only very briefly, and thus rarely touch the

Hello, This afternoon I wanted to upgrade to 7.1 two good old dell PowerEdge servers which were running FreeBSD 6.x. It went fine and quickly on the poweredge 1950, but it failed completely on the poweredge 1850. Facts: - boot cd and setup / operation of freebsd 6.x or 7.0 is fine Message log abstract: $ uname -v FreeBSD 7.0-RELEASE-p7 #0: Sun Dec 21 08:31:52 UTC 2008

Hi, The server is running CentOS 5.8 Linux OS on Dell PowerEdge R710 having raid controller card 03:00.0 RAID bus controller: LSI Logic /Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05) /usr/sbin/smartctl -a /dev/sda smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ Device: DELL PERC H700 Version: 2.10 DELL

Hello! I''ve a ubuntu server running over a HVM DomU. After a hang, the domU doesn''t start again. The domU was not able to mount the virtual machine disk so I started with a live cd and I tried to mount the disk root part / with no success so I ran fsck.ext3 and it gave me input/output error in the domU and in dom0 the kernel says: Feb 14 18:22:28 scofield last message

Hi, This is the env. Dell Poweredge 2900 Redhat ES 4 ( 64 bit ) I installed the rpm''s # rpm -ivh xen-3.0.3.0-1.*.rpm # rpm -ivh kernel-xen-2.6.16.29-3.0.3.0.*.rpm And changed grub. But when I reboot, It hangs on "scrubbing free RAM". What are my option to fix this and get xen working? Joeri _______________________________________________ Xen-users mailing list

Hello, I am having issues making my box boot with Xen. I am working with linux-2.6.16.28-xen on a gentoo box. The server is Dell PowerEdge 1850 with Perc 4e/Si, FW 521X. When dom0 reaches the point of scanning the SCSI controllers, it hangs in a loop aic7xxx_dev_reset_returns 0x2002. My regular (non-xen) kernels come up fine with detecting my adaptec scsi controller. Had anyone had the same

I have a new (used)Dell Poweredge 1550 server with 2 scsi drives (dual 1ghz w/ 2048MB) that I'm attempting to install CentOs 4 onto and am having problems getting the darn thing to recognize the hard drives. (it's worth noting that it's running RAID 0 and the RAID bios recognizes both drives as being in "optimal" state). I start the installation process and all is going

Hello, Just chiming in here: >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com] On >Behalf Of >bdolljr@bigskytech.com >Sent: Viernes, 22 de Julio de 2005 01:24 p.m. >To: Asterisk Users Mailing List - Non-Commercial >Discussion >Subject: RE: [Asterisk-Users] Dell Hardware >> Mmhh nice !! So, why did Digium forbid it :)?

On Thu, Jun 30, 2016 at 5:28 PM, Valeri Galtsev <galtsev at kicp.uchicago.edu> wrote: > > On Thu, June 30, 2016 2:59 pm, m.roth at 5-cent.us wrote: > > I've been googling, and haven't yet found the answer: does anyone here > > know if a MegaRAID SAS 2008 (falcon) (rev 03) can handle drives bigger > > than 2TB? > > > The following sources say, yes

Release notes say no support for the RAID card in a box I just picked up...is there no hope for this box running 2.6 kernel? http://www.redhat.com/docs/manuals/enterprise/RHEL-4-Manual/release- notes/as-x86/ The kernel shipped with Red Hat Enterprise Linux 4 includes the new megaraid_mbox driver from LSI Logic, which replaces the megaraid driver. The megaraid_mbox driver has an improved design,

Nikos Gatsis - Qbit wrote on 6/27/2019 8:36 AM: > Hello list. > > The next days we are going to install Centos 7 on a new server, with > 4*3Tb sata hdd as raid-5. We will use the graphical interface to > install and set up raid. > > Do I have to consider anything before installation, because the disks > are very large? > > Does the graphical use the parted to

On 29/06/19 2:46 AM, Blake Hudson wrote: > > Nikos Gatsis - Qbit wrote on 6/27/2019 8:36 AM: >> Hello list. >> >> The next days we are going to install Centos 7 on a new server, with >> 4*3Tb sata hdd as raid-5. We will use the graphical interface to >> install and set up raid. >> >> Do I have to consider anything before installation, because the

It's Digium, not Dell. I have two identical Dell 1850s, each with the allegedly offensive built-in E100 Ethernet ports. I placed a TE410P card in each. One worked great, the other would not modprobe. Upon examination, we discovered that the two TE410P cards had different firmware revisions. Turns out the one with the older version was the one that worked. We sent the second card back

hi i m trying to install centos5 on my poweredge 2950 with no luck. the raid controler is LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) indeed all is going fine during the installation but when i reboot the server panic the first error i got is this one error mounting /dev/root on /sysroot as ext3: block device required it seems that it can't find the /dev/root devices. but when

Hi All, I install CentOS 4.4 without additional driver disk. When I partition the disk, I create nothing on the raid 5, and I just create " / " " /boot " and "swap" on the raid 1. And it works. When I create a mount point /storage on the raid 5 and create " / " " /boot " and "swap" on the raid 1. The error comes again, saying that