similar to: problems configuring second ethernet interface in Centos guest OS

Hi, in SLES10 YaST insists in "xorg-x11" being installed, even if the display is redirected to a remote host. So I thought: Can''t I do it simpler? I''m still new to XEN, but I started like this: mount the SLES10 DVD to /mnt, and use this configuration file: ----- disk = [ ''phy:/dev/system/as1,hda,w'', ''phy:/dev/hda,hdb,r'' ] memory

Dear I need create second bridge xenbr1 for separate traffic between my virtual machine , I following this step but show message that Link veth0 is missing, how I can create veth0 ? When I run script for create xenbr1 ./network-bridge netdev=eth1 bridge=xenbr1 start Shwo this message Link veth0 is missing. This may be because you have reached the limit of the number of interfaces that the

Hi XEN-Community, I''m trying to build the actual version of the XEN gplpv (win-pv) drivers. I use the a Windows XP machine with the WinDDK 7600.16385.1 and Wix 3.0 like suggested in the BUILD.txt The building process itself seems to be working, at least there are no compiler error. (I just made the "makedist") Instead, the final *.msi files and the drivers itself are nowhere

I saw some really bad things happening on our production servers. First dom0: Ubuntu xen1 2.6.24-24-xen Xen 3.4.0 compiled from source. I don''t remember exactly what GPLPV version was installed but I know for sure from early 10.x series. domU: Windows Server 2008 64-bit (Test mode enabled) Second dom0 has almost identical setup, thou on different hardware. When I start copying large

I want to add the following route command route add -net 192.168.2.0/27 gw 192.168.2.3 via the normal network setup. The result should be the following routing table (the first line): 192.168.2.0/27 via 192.168.2.3 dev xenbr1 scope link 192.168.2.0/27 dev eth2 proto kernel scope link src 192.168.2.4 192.168.2.0/27 dev xenbr1 proto kernel scope link src 192.168.2.3 192.168.1.0/24 dev xenbr0

Hi everyone After configuring bonding eth0 and eth1 in domU, "cat /proc/net/bonding/bond0" showed it was configured correctly. ----------------------------------------------------------------------------------------- Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth1 Currently Active Slave: eth1 MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms):

I''ve got 2.0.7 running on a machine with 1 physical interface and two bridges, like so -- bridge name bridge id STP enabled interfaces xen-br0 8000.0040f4ce392f no eth1 vif5.0 vif9.0 xenbr1 8000.feffffffffff no

Hi all, when I try to build an initial ramdisk with the option --with=xennet, I get the following error No module xennet found for kernel 2.6.18.8-xen I looked at the /lib/modules/2.6.18.8-xen/kernel/drivers/xen and there is no xennet module over there, which causes the problem. How can I get the xennet module? Thanks, Luca _______________________________________________ Xen-users

On Mon, 2005-10-24 at 17:14 +0100, Hin-Tak Leung wrote: > Peter Dalgaard wrote: > > hin-tak.leung at cimr.cam.ac.uk writes: > > > > > >>Full_Name: Hin-Tak Leung > >>Version: R 2.2.0 > >>OS: x86 linux > >>Submission from: (NULL) (131.111.126.242) > >> > >> > >>Rgnome depends libglade 0.x and libxml 1.x . >

Hello everyone, Recently I have been testing my customized Xen 4.2 networking setup. It works pretty good and I would like to share it with anyone who is interested. The relevant files can be found here: https://github.com/slacks42/xenscripts Benefit: configure the Xen related networking devices with one understandable bash script. Please note that this is all still work in progress. For

Hello you all out there Does anybody know the definite guide to create a dummy ethernet device? So, what I want to have is an ethernet device, without a physical link, or so called a dummy device. My goal is to have apache with mod_proxy and balancer running on peth0 in dom0. Apache is spreading my connection to the backend domU''s, where the webservices are running. The connection

I am having issues with guest OSes running on SLES10 (Sun 4200) hosts. Periodically, the guest OS system drops off the network. From the general network it is not pingable, consequently, ssh fails. If however, I log into the SLES10 server that is hosting the guest OS and ssh to the guest OS, then it becomes immediately pingable and accessible to the rest of the network. Almost like the

I am not quite sure if this issue relates to iptables, routing or Xen virtual machines. Too many variables for my simple mind, so I'm asking some advice :) This is my network setup: Internet --- eth2 + CentOS dom0 / firewall / router + eth1 (xenbr1) --- LAN with private IPs --- separate file server and workstations + eth0 (xenbr0)

Once last night and the night before a XenU go into a Zombie state, requiring a reboot. I''m not quite sure what is happening, and am looking for advise on how to diagnose the problem. .. While writing this email, it crashed again. This time I had an ''xm console calcutta'' capturing the output. I read a suggestion in these archives suggesting that I can just

On Mon, Jan 19, 2015 at 1:00 PM, Felipe Balbi <balbi at kernel.org> wrote: > I just thought that such a small patch which causes no visible change to > SVN users and allow for git users to build R would be acceptable, but if > it isn't, that's fine too. Felipe --- It would appear that you are unaware that you are walking a minefield of entrenched positions and personality

this is not really an R question but I imagine I would use R to do it. I have a loop that has thousands of iterations and after each iteration the results are a box leung pvalue a regression t-stat and a profit number so, i have 1000's of these sets of the 3 numbers above. obviously, the p-value varies from zero to 1. the t-statistic goes from about -3 to 3 and the profit numbers goes

Hi, we''re running 4 xen servers on our network with multiple network cards. During HighLoad we experince degeneration of inbound network traffic through our loadbalancer. I might found a reason for it, in Dom0 dmesg output looks as follows: [1157421.975910] eth0: received packet with own address as source address [1157421.975957] eth0: received packet with own address as source

Hey All I''m Using Xen 3.0.3-105 on CentOS 5.5. It Has to Nics: eth0 - Internet eth1 - Internal Lan ( where Dhcp , DNs , Cobbler - Kick Start Server Resides ) I''ve Set xend-config.xsp to create xenbr1 on eth1 and it looks well So Guest May Get Access TO ALl Resources via the Bridge. brctl show bridge name bridge id STP enabled interfaces xenbr1

Hello Everyone, I have set up a xen server with 10 physical network devices using the bridge mode of XEN. This is because I want to split and separate the network traffic for security reasons. Maybe the best way is to use pci back hide. But I want to understand what is going on here. For all testings I have only activated eth[0-3]. My first tests were successful. I have created a VM using

Dear List-Colleagues: I have been working on installing Xen on Suse 10.3 for some time now. I am green as grass - both a total newbie to Xen and a relative newbie to Linux (as well as a total newbie to SuSE). Currently, I am at the point that when I click on the Xen entry in my grub loader I see Xen starting and running through much of its early setup. Eventually, however, it quits on