similar to: Boot Failed While creating guest domain

hi, im using xen on fedora core 8 as dom0, and i downloaded the fc8 image from jailtime.org, when i use "xm create /xen/fedora/fedora.fc8.xen3.cfg -c" i get the following on my terminal: Using config file "/xen/fedora/fedora.fc8.xen3.cfg". Started domain fedora.fc8 Linux version 2.6.21-2950.fc8xen ( kojibuilder@xenbuilder2.fedora.redhat.com) (gcc

Hi   Below is what i get while creating a guest domain, please someone help me.   [root@xenserver xen]# uname -a Linux xenserver 2.6.21-2950.fc8xen #1 SMP Tue Oct 23 12:24:34 EDT 2007 i686 i686 i386 GNU/Linux [root@xenserver xen]# [root@xenserver xen]# xm list Name                                      ID   Mem VCPUs      State   Time(s) Domain-0                                   0   930     2    

I am trying to create a para-virtualized guest with the same kernel image and initrd image as dom0. The configuration is below ================================================================================ kernel = "/boot/vmlinuz-2.6.21.7-3.fc8xen" ramdisk = "/boot/initrd-2.6.21.7-3.fc8xen.img" memory = 428 name = "fedora.fc8" vif = [ '''' ] dhcp =

Hello, I just gain experiences in using XEN and hope you can help me. My hostsystem is Centos5 that I installed on a Software-Raid (Level 1). Afterwards I downloaded the debian-tarball from the jailtime.org website, extracted/mounted the image and copied the "*/lib/modules/*<kernelversion>"-folder from my host to the guest. My XEN-Configfile looks like this: kernel =

Hello all. I''ve upgraded my drives, and in doing so loaded FC8. Latest kernel-xen.x86_64 (2.6.21.7-5) and xen.x86_64 (3.1.2-5) available, using 2 Intel NICs with e1000 driver. All worked fine on FC5 with custom domU FC5 with pcifront and NIC drivers in kernel. Now, I''m unable to get the NICs to function inside my domU. The are visible in lspci, and ipconfig. DomU dmesg

Hi All I need some real help in using virt-install. I have a fedora8 o/s + Xen installed and wanted to have RHEL4 as the Guest Domain. I have mounted the CD1 of RHEL4 and wanted to install this as guest domain using virt-install and not able to do and seeking help. Please let me know if the parameters to virt-install are correct and if not please let me know the correct parameters. Contents of

Any help is greatly appreciated.   Thanks Chandra Sekhar --- On Sun, 11/16/08, Chandra Sekhar <sekhar_15@yahoo.com> wrote: From: Chandra Sekhar <sekhar_15@yahoo.com> Subject: [Xen-users] Error while running virt-install To: xen-users@lists.xensource.com Date: Sunday, November 16, 2008, 11:23 PM Hi All I need some real help in using virt-install. I have a fedora8 o/s + Xen

Hi, I am facing an issue which i have described in the below and looking forward your help regarding the same at the earliest. Description:         I am trying to create virtualization using Xen-Hypervisor.     I have installed fedora 8 and installed xen kernel as per the document guideless which are mentioned in the below.  1. Install Virtualization Software: su -c “yum groupinstall

Hi All, I am trying to compile Xen 3.3.0 source code which downloads updates from mercurial repository. I am trying to modify the CPU scheduler, but before i make any changes i need to test it by installing it from source. OS: Fedora 8 Linux I compiled the source code by using [root@localhost xen-3.3.0]# make world [root@localhost xen-3.3.0]# make install [root@localhost xen-3.3.0]#

How can I pass a vga mode to the kernel on a dom0? I have a system that I can''t get to display on any of my monitors, it keeps saying out of range. This happens as soon as the kernel starts booting (meaning its not an X problem). Based on my understanding, I should be able to pass a vga mode (i.e. 640x480 8bit color) to the kernel and use that for booting. title Fedora

Hi all, I''m trying to get xen running on my new PC: [root@mail ~]# uname -a Linux mail 2.6.24.3-34.fc8 #1 SMP Wed Mar 12 18:17:20 EDT 2008 i686 i686 i386 GNU/Linux [root@mail ~]# rpm -qa | grep xen xenner-0.23-1.fc8 xen-libs-3.1.2-2.fc8 xen-3.1.2-2.fc8 kernel-xen-2.6.21.7-2.fc8 [root@mail ~]# [root@mail ~]# cat /etc/grub.conf # grub.conf generated by anaconda # # Note that you do not

Hi, im using a fedora core 8 domU and fedora core 8 as my dom0 on xen3.1.0-13, my config file reads: kernel = "/boot/vmlinuz-2.6.21-2950.fc8xen" ramdisk="/boot/initrd-2.6.21-2950.fc8xen-no-scsi.img" memory = 428 name = "fedora1.fc8" vif = [ ''mac=00:16:3e:00:00:03,ip=192.168.2.105'' ] dhcp = "off" netmask = "255.255.255.0" gateway

PS: A similar issue has been partially discussed in [Xen-devel] but solution is not given or not clear. http://lists.xensource.com/archives/html/xen-devel/2007-09/msg00568.html I am building Xen-3.2.0 (from source) with a ''working, known good'' xenified linux kernel from Fedora Core 8 (kernel-xen-2.6.21.7-3.fc8xen). Here is the build failure I get when I run: # make

more /etc/xen/scalix2 kernel="/boot/vmlinuz-2.6.18-8.1.6.el5xen" memory = 512 name = "hating-xen" vif = [''ip = "10.0.1.150", bridge=xenbr0''] disk = [ ''/dev/XEN/scalixroot,sda1,w'', ''/dev/XEN/scalixvar,sda3,w'', ''/dev/XEN/scalixswap,sda2,w'' ] It

Hello Dear everybody! I just installed CentOS 5.3 and try the built-in Xen 3.1 with it. But even the typical ttyLinux doesn''t work when the domain is created.-- it just doesn''t give me the login prompt while the domain ttylinux is booted. [root@soe-hd513-pc102 nimbus]# xm create ttylinux-xen.conf -c Using config file "./ttylinux-xen.conf". Started domain ttylinux

I am having an issue getting a DomU to boot properly. There is never any indication of a stop error or kernel panic, it simply hangs after "Starting crond [ OK ]" and never continues. I''ve included my mkinitrd and output from xm create... please help! ##### XENBUS errors ##### XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050

Hi all, I have a problem during the lauching of my first virtual image. First thing : domain 0 is on fedora core 6 (probably a xen package made in fedora :-S, sorry ...) Second thing : the error is really traditional (i already had it with uml) but there i am blocking. here my config file (for image on logical volume, swap too) root = "/dev/sda1 ro" [root@p-virtvip8 xen]# cat p-virtser9

I installed xen on top of Cent OS 5.3 64bit OS with gitco rpm sources. Everything works fine except that I can''t run 64bit pv guest with virsh command. With xm commands I can load the same guest. 32bit pv guest, 32 bit and 64bit hvm works fine with both virsh and xm command. Has anyon have any idea? any help will be largely appreciated. **This is dumpxml for 64bit configuration* **

Hello, I've setup apache basic auth on by web server to protect my nagios site. It's been working just fine, but suddenly it stopped accepting passwords even tho they are being typed in correctly. I was wondering if I could get some advice on how to troubleshoot this? I'm on a centos 5.4 machine Linux 2.6.21.7-2.fc8xen #1 SMP Fri Feb 15 12:34:28 EST 2008 x86_64 x86_64 x86_64

Ok So I''ve been able to successfully create a CentOS5 virt-install on xen using LVM created partitions. But have many problems trying to install 4.4 (It does not work with virt-install hence you have to try another method). I Created a name, name-tmp, name-swap, name-root paritions. I did mke2fs and mkswap no problem everything is good. I went on further to mount the name-tmp and