similar to: Giving a domU direct access to a NIC

Hello, I am doing tests to convert old rotting servers into a big shiny new Xen platform. I have been able to migrate a Windows 2003 server without a scratch. I am trying to do the same thing with Windows 2000 Server but things aren''t so great... I made an image from the disk that worked in a machine. Then I boot on this image using Xen. Windows 2000 starts to boot up then give me a

Hello, I have been struggling through the task of moving our infrastructure over to Xen VMs. We were initially using Ubuntu packages for both dom0 and our domUs, but experienced extreme instability so we moved to CentOS, which has been much more reliable for dom0. Since we already had a bunch of Ubuntu VMs, we left them using the Ubuntu 2.4.24-19-xen kernel, but this has turned out to be

Is it possible to disable one of the (real) Ethernet interfaces from Xen so that Domain 0 doesn''t see it? I.e. when the Domain 0 XenLinux boots up it only has eth0 although there are actually two NICs in the machine. Would it be possible to do this using the "nics=" parameter? I know this can be done for doms>0 but get the impression Domain 0 is different. Alternatively

RHEL5 32bit xen 3.3.0 rpms? Anyone? ;) _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Fresh Ubuntu 13.10 server build with all the latest patches, installed Xen 4.3 and XCP-XAPI. Got Xenbr0 working properly and created an LVM storage repository and a CIFS ISO repository. I can create VM''s no problem at all but whenever I try to start them I get the following error from the log. Only Windows VM. The error comes up almost instantly when trying to start it. Not sure where to

Hi, I have an XCP 0.5 box running a few DomUs some of the DomU''s data is stored at (clustered lvm volumes on) a Coraid etherdrive box which is connected via an Ethernet cable to a dedicated card of the XCP box, for which in the network config I'' ve specified: MTU=9344: xe network-param-list uuid=.... gives: MTU ( RW): 9344 on the DomUs if I leave the MTU at 1500 (default

Hello, I am having some routing troubles with my Xen setup. I have two domUs, one running as a firewall and another running as a dmz: The dom0 has the following: - eth0 bridge (10.0.0.3/24) The domU-firewall has the following: - Direct passthrough PCI NIC (Public Internet) - Virtual NIC connected to the eth0 bridge on dom0 (10.0.0.1/24) - Bridge called brdmz for the dmz zone (10.0.2.1/24)

Hi, I''ve been successfully using shorewall in our K12 school since the 2.x days initially on Mandrake and now on Debian. Because of that my config has got quite complicated. The firewall has a working MultiISP setup with four interfaces (I''ve renamed them with udev to easy their identification): lan-if, dmz-if, snt-if and dnt-if (one of the providers (the one on dnt-if) is a DSL

Ive got XCP 1.1 on 2 blades and setup a pool master, then shared the SR all seems fine, Id like to manage it with XenServer Web Self, though its throwing an error Unsupported version of Citrix XenServer detected. Expected version: 5.6; Detected version: 1.1 wasnt there a trick to change it and fake it to be correct?? _______________________________________________ Xen-users mailing list

Hi, For 10 times now i tried to install a VM in to my new XCP machine but everytime i get the same error: [root@xcp-digitog ~]# xe vm-start vm=Debian6 Error code: Using <class ''grub.GrubConf.Grub2ConfigFile''> to parse /boot/grub/grub.cfg Error parameters: WARNING:root:Unknown directive load_video, Traceback (most recent call last):, File "/usr/bin/pygrub",

Hello, I am running a functional Xen 4.0 platform. The objective is the project I am currently running is to replace 4 VMWare ESX by 4 Xen 4.0 hypervisors. I have been able to reproduce all the core VMWare features in Xen (but better of course =D) except memory overcommitment. I know this feature has been included since Xen 3.3 but I have found almost no information about it. When I try to

Hello, I am a rather new user to OpenSolaris and I have been loving every minute of it. I have spent quite a lot of time looking around for bandwidth management features and Project Crossbow is just amazing. It is truly amazing compared to what Linux has to offer. I would like to use flowadm to do some bandwidth management on a tun interface. The problem is that it is not recognized by the dladm

Could somebody program this kind of plot type to R, if none exists, based on mds or correlation tables or some more suitable method? What do you think about idea? Does it work? None similar or better exists? http://weightedassociationmap.blogspot.com/ Atte Tenkanen University of Turku, Finland

Hi, I think this would be the best forum, let me know if not. I am in the middle of writing fencing scripts for Citrix XenServer virtual machines (specifically for use with Redhat Clustering, but will also work from pacemaker etc) and I noticed that XCP uses the same XenAPI (from what I can tell). Just wondering if someone would be able to test the scripts on XCP and let me know if they work.

Hello xen-users ! I am coming for help concerning the just released 4.0 version. Install has worked rather well on my Debian Lenny. I have just had a few bugs for which I have found the answer looking around on this list. I have created a Debian Lenny domU which boots up just fine. The only problem is that I am unable to get a console prompt when using "xm console nameofdomU". I do see

Dear Xen users! In case you were struggling with recent version of th gplpv drivers, I''ve possibly found an LVM related bug in it, and reported to James Harper. Thats''s the point: I''ve tested the mentioned version of your driver on top of 32bit xen-3.2.1 32bit xen-3.3.0 and 64bit xen xen-3.3.0 hypervisors, dom0 was always an appropriate version of a 32bit PAE kernel,

Hi, As it has been brought to my attention (by several parties), my current MB does not support VT-d. Since I don''t feel like purchasing a brand new system, I have searched for replacement MB-s that would fit into my existing uATX case, support my C2D CPU, and support at least 4x2GB ram. I have narrowed it down to the following four models: SUPERMICRO MBD-C2SBM-Q-O (Q35 chipset)

Hello, We have been using samba 4.0.9 with good success so far and are looking to add the ability for users to print from network printers shared by Samba. The printing part works fine using coupling with lp and cups. In order to automate this fully for the users, we would like to enable point and print drivers. The print$ share is accessible with no issues and is configured as below :

re I would like to do some firewalling and p2p shaping/limiting on one of the vlans in my network and I was thinking of using linux box as transparent bridged firewall/limiter. For this I''m planning to use AMD64 2.2Ghz box with 2 1gbit NIC (Broadcom 5721), that will be bridged. The box must be totally transparent and unseen in the network, as well as it should have much influence on

Hi, I have read your message about building a VirtualGL server in a xen domU at http://www.mail-archive.com/virtualgl-users@lists.sourceforge.net/msg00088.html . I plan to do exactly the same. Could you please share some of your experience? What HW have you chosen? Have you succeeded? According to the information at http://wiki.xensource.com/xenwiki/XenVGAPassthroughTestedAdapters ,