similar to: Problems with bridged networking

Hello, Despite of reading a lot of descriptions I don''t understand the network configuration. I simply have too little experience. I work remote with the machine via ssh. My dom0 is running. I copied an existing installation into a LV and created the following file: # cat /etc/xen/domu-sarge # -*- mode: python; -*- kernel = "/boot/vmlinuz-2.6.18-4-xen-686" #kernel =

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

Hello. I have installed the SuSE Linux 10 XEN kernel but no domU yet. Now I cannot ping to and from dom0. I get lots of ARP broadcasts from dom0 but dom0 seems to ignore ARP answers. When pinging to dom0 it ignores arp requests. This happens regardless xend is running or not. This happens in the xen kernel only, when booting stock kernel all works as expected. What can I do? Robert

Hallo Mailinglist:), i used xen 4.1 with xend xm a while. I compiled the unstable 4.2 today and most thinks run fine :). I have only one big problem, the network for my guestsystems. It don't want to work. Hopefully somebody can help me. In Xen 4.1 i only wrote the following line in my questconfig: vif = [ "bridge=eth0,script=vif-bridge" ] And everything works fine. This does not

Hello all, I had setup shorewall before succesfully with a normal LAN to internet connection. Now I''m connected to the internet via VPN and I got problems with configuring Shorewall. Any help is appreciated. This is my setup: - Gentoo Linux laptop (kernel gentoo-dev-sources-2.6.8.1) with Shorewall 2.0.4 (setup for Standalone one interface) and iptables 1.2.11 - VPN client is

Hi, I cannot get my network up in WinXP- and winVISTA-domU''s I need some help, since I got lost in the google-jungle... My system: UBUNTU gutsy gibon-AMD64 on a intel core duo-system. this is my /etc/xen/winxp.cfg: ######### # # Configuration file for the Xen instance debian.qwork.test, created # by xen-tools 3.5 on Sun Mar 16 20:03:26 2008. # # # Kernel + memory size # kernel =

Hi, I've been using CentOS & Xen on a server that has 2 VM's configured. The default configuration includes one physical iface that is propagated (by a default bridge) to the VM's. Since I wanted to configure additional physical iface, define a new bridge and propagate it to the viface-s of the VM's, i configured the bridge/phys. iface and brought it up (here are

Hello, I''m new to Xen (and this mailing-list) and facing some problems with the network. I''m stuck and don''t know how to continue. And Google isn''t very helpful either... My setup: - Ubuntu 7.10 for dom0 and Debian 4.0 for all domU - 4 physical NIC (DHCP from my ISP, internal LAN, DMZ & WLAN) - 1 Dom as firewall/router - 1 domU with internal services

xm list reveals the following information... Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 315 0 r---- 2058.1 Domain-1 11 342 0 -b--- 5.2 9611 Domain-2 12 342 0 -b--- 3.9 9612 Xen seems to be working beautifully but I have not yet figured out how to get Domain-0 to ping both Domain-1 and Domain-2,

hi, i need eth1 for an adsl connection via rp-pppoe (pppd). I was able to hide eth1 in Dom0, but how i use this device in DomU? Do i have to load the 8139too modul, to have eth1 in DomU? cu denny -- Sicherheit verständlich http://www.sides.de GnuPG Key http://pgp.upb.de:11371/pks/lookup?op=get&search=0xAB7D3FE0 _______________________________________________ Xen-users mailing list

Hi, i allready searched the archives, but found no message that really helps me. i am running debian etch on dom0 and debian sarge on domU. I had a running setup with debain sarge on dom0 before, but now with etch i can not get networking to work in domU. I use routed networking, but the same seems to happen with bridged networking: eth0 within domU is not brought up. I think it maybe related

Hello. I''ve just started with Xen and configuring Dom0. My hardware is Core2Duo based Xeon server and I installed Debian etch for amd64 architecture. The Xen related pachages installed are the following. linux-image-2.6.17-2-xen-amd64 linux-modules-2.6.17-2-xen-amd64 xen-hypervisor-3.0.3-1-amd64 xen-tools xen-utils-3.0.3-1 xen-utils-common My problem is that when xend is

hi everyone, so,first it seemed a trivial question to me, but since I could not find anybody being neither able to answer this question nor giving a short config example. after a few sleepless nights and exhausting all the reading and research. here I am sharing my problem with all of you, in the hope of some possible solution/sugestion. or is it that this is impossible?? below my

Hello @all, thanks for all the helpfull answers in this mailing list. They helped me compiling a new kernel 2.6.10.11 with Xen 2.0.6 (my first one), setting up a dom0 with RAID, LVM and loop devices for domU, integrating a second network as xen-br1 (I''m calling the /etc/xen/scripts/network script from within /etc/init.d/xend to bring up / down the second bridge.) and bootstrapping

Hi. I have another question, hopefully easier than my last: Do all physical interfaces in dom0 need to have an IP addresse in order to be used as a bridge by guest domains? I thought that the interface would have to merely be "up" but not necessarily have an IP address configured since bridging is done at layer 2. But alas, if I don''t configure an IP address on dom0 the bridge

Hey all I''m new to Linux and Virtualizing. I''m trying to dedicate my nic''s to each virtual server. For instance, virt server A would use nic1 and virt server B would use nic2 and so on. I''ve been reading some stuff for this list and to tell you the truth I''m a bit overwhelmed. We are going to run SLES10.1 and Xen. I would appreciate any assistance.

In spite of reading howtos and this mailing list now for several weeks, I am still not able to get the network of my winXP guest connected to the host (opensuse 10.2) or the external network. There are some network interfaces missing on my host (peth0, vif0.0). ifconfig: eth0 Protokoll:Ethernet Hardware Adresse 00:18:8B:B3:1A:AC inet Adresse:192.168.0.66 Bcast:192.168.0.255

Hi Group ... havin'' read whatever I could "google" on this topic, I didn`t find any solution: openSuSE 10.2 (out of the box), xenkernel, running on HP Proliant DL360G5 (dual internal networking, plus additional 4-port adapter) gives me eth0 - eth5, but only peth0 - peth3 (as well as vif0 - vif3 and consequentely xenbr0 - xenbr3). I increased the number of loopback-devices

I have a setup with two Internet providers. One circuit (net0 == eth1) is used primarily for employees and tunnels to other sites. The other (net1 == eth2) is for the production machines that customers access. Everythung works in teh sense that packets get to where they are sent (mostly) but I recently I had a sniffer on the system and noticed a problem I cannot solve. traffic coming in

We switched over from a bordermanager firewall to a shorewall firewall. Some stuff is not working now. I realized that I had not created the route for the network that is not working however once I created it, it still didn''t work. Most of our network is fine however some pieces are not working. [Net] - [Shorewall] - [LAN] - [Cisco] - [Clients and servers not working] The firewall