similar to: Xen PV Drivers and Windows 2000 server SP4

Hello, somene knows who to realize a Live Migration and what I need to do it? Thanks. Gustavo Alkmim _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello everybody, I tried to measure the performance of the available drivers for windows as a HVM guest. I used the gplpv drivers 0.9.11-pre17, the PV drivers from Novell, and the drivers from Citrix XenSource with the XenServer 5. The Novell and gplpv drivers were more or less at the same speed, for both, network and disk performance. The disk performance was about 10MB/s reading and

Is there currently a way of preventing filesystem corruption if the following sequence of events occurs: 1. ''xm save domain domain.chk'' 2. ''xm create domain'' 3. ''xm shutdown domain'' 4. ''xm restore domain.chk'' ? If not, I''m thinking of trying to implement into the windows gplpv xenvbd driver something along the

Hello List, Merry Christmas to all !! Basically I''m trying to boot a Windows 2008R2 DC HVM with 90GB static max memory and 32GB static min. The node config is Dell M610 with X5660 and 96GB RAM and its running XCP 1.1 Many times the node crashes while booting HVM. Sometimes I get success. I have attached the HVM boot log of successful start. Many times the node hangs as soon as the

On Thu, Jun 19, 2014 at 2:51 PM, Andrew Rae <A.M.Rae at leeds.ac.uk> wrote: > Hi all, > > wasnt sure whether this was the best place to put this information; but something seems to have gone 'backwards' in the later pre-releases of 6.03 regarding network booting. I'd say this is an excellent place to start. I'm getting some similar results here with the precompiled

> Hi all, > > wasnt sure whether this was the best place to put this information; but something seems to have gone 'backwards' in the later pre-releases of 6.03 regarding network booting. > > below are results of me testing - i did each a few times to make sure they are valid results. > > hope it helps identify something that's gone awry ? > so far, 6.03

Hello James, I am doing quite rigorous torture tests with Xen and GPLPV. Let me first repeat the test setup: Use Xen 4.1.1 and kernel 2.6.32.36 (commit ae333e9). Configure 2 HVMs called VM1 and VM2 as follows (per HVM): 2 VCPUs, 2 virtual disks, 1024 MB RAM, viridian=1 Install Windows 2008 R2 SP1, do install everything twice - never clone. Install GPLPV, iometer 2006.07.27, prime95 26.6 x64,

Hi James. I go through the patch, since all its changes happens inside __xen_evtchn_do_upcall(), so I apply the patch into my 2.6.31.kernel by manual. (I was failed to merge a usable, 2.6.38dom0, since quite a lot branch needed, such as blkback, netback) But still, the blue screen shows up. Log attached. Is the timeout better than before? Beside, I think I need find some to examine my

I''m been busily converting the xenpci and xenvbd drivers from WDF to WDM to resolve a few issues including potential licensing problems with the Microsoft WDF and to (hopefully) allow them to function as boot drivers when doing install and system recovery. It was a fairly major rewrite of xenpci, and xenvbd, which are now working (booting and running without crashes so far). I

I''m been busily converting the xenpci and xenvbd drivers from WDF to WDM to resolve a few issues including potential licensing problems with the Microsoft WDF and to (hopefully) allow them to function as boot drivers when doing install and system recovery. It was a fairly major rewrite of xenpci, and xenvbd, which are now working (booting and running without crashes so far). I

Hi all, wasnt sure whether this was the best place to put this information; but something seems to have gone 'backwards' in the later pre-releases of 6.03 regarding network booting. below are results of me testing - i did each a few times to make sure they are valid results. hope it helps identify something that's gone awry ? so far, 6.03 pre11 and pre13 (excluding efi32) seem most

I''ve just uploaded a new binary release of the GPL PV drivers for Windows - release 0.6.3. Fixes in this version are: . Should now work on any combination of front and backend bit widths (32, 32p, 64). Previous crashes that I thought were due to Intel arch were actually due to this problem. . The vbd driver will now not enumerate ''boot'' disks (eg those normally serviced

I''ve just uploaded a new binary release of the GPL PV drivers for Windows - release 0.6.3. Fixes in this version are: . Should now work on any combination of front and backend bit widths (32, 32p, 64). Previous crashes that I thought were due to Intel arch were actually due to this problem. . The vbd driver will now not enumerate ''boot'' disks (eg those normally serviced

I''ve just uploaded a prerelease of 0.9.9 to http://www.meadowcourt.org/downloads/ Please read the following before using: It fixes a few disk related bugs... I''ve just been testing it on a Windows Small Business Server 2003 R2 I have just restored from tape into a DomU from a backup of a physical system and it''s working fine - 0.9.8 BSOD''d almost immediately

I''ve just uploaded a prerelease of 0.9.9 to http://www.meadowcourt.org/downloads/ Please read the following before using: It fixes a few disk related bugs... I''ve just been testing it on a Windows Small Business Server 2003 R2 I have just restored from tape into a DomU from a backup of a physical system and it''s working fine - 0.9.8 BSOD''d almost immediately

I''ve just uploaded 0.9.11-pre12 of the GPL PV drivers for Windows. Since -pre10 (and -pre11) I''ve fixed a heap of crashes that were plaguing xennet under load, and also rewritten the interrupt/event distribution logic to improve performance. Under windows 2003 I can now get network speeds of 1-2Gbit/second TX and 600Gbit/second RX, which is considerably better than I was

I''ve just uploaded 0.9.11-pre12 of the GPL PV drivers for Windows. Since -pre10 (and -pre11) I''ve fixed a heap of crashes that were plaguing xennet under load, and also rewritten the interrupt/event distribution logic to improve performance. Under windows 2003 I can now get network speeds of 1-2Gbit/second TX and 600Gbit/second RX, which is considerably better than I was

Hi, During the install of the univention.de-signed GPLPV drivers (gplpv_Vista2008x64_signed_0.11.0.308.msi) on my Windows 7 guest, I get a BSOD "DRIVER_IRQL_NOT_LESS_OR_EQUAL" in xenvbd.sys. Afterwards, Windows won''t start. I''m now trying to do a System Restore. I will try not installing the VBD driver afterwards and see if the others do work. Full BSOD:

This one just fixes the install.bat problem that Jim pointed out. http://www.meadowcourt.org/WindowsXenPV-0.8.3.zip James _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

This one just fixes the install.bat problem that Jim pointed out. http://www.meadowcourt.org/WindowsXenPV-0.8.3.zip James _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users