similar to: Removing stale vif entries?

[please keep the list CC'd, thanks] > On Aug 14, 2015, at 10:27 AM, Bob Brown <bbrown at harpercollege.edu> wrote: > > Would it put NA in the log files if maxage was too short? I think so. I haven't tried it, but if snmp-ups polls every 30 seconds, and MAXAGE is 15, then with a random polling interval, 50% of the time the data would be more than 15 seconds old. In

Hello list members, I am running NUT 2.0.1 on an OpenBSD 3.8 system, using the OpenBSD port for net-snmp-5.1.2p2. The UPS is connected via an AP9606 Web/SNMP card with current firmware, and the LAN. All goes well for a long time, usually more than one month. Then the system starts spitting messages about losing communications with the UPS. A second message about reconnecting follows immediately.

When start a domU through xl create. The domU associated ip in the configuration file is not recorded in the xenstore. For this reason vif-common.sh antispoof scripts fails. *xl create * /usr/bin/xenstore-ls /local/domain/0/backend/vif/5/0 frontend = "/local/domain/5/device/vif/0" frontend-id = "5" online = "1" state = "4" script =

Hi Charles, On Monday, 27. June 2016 08:59:02 Charles Lepple wrote: > > is there a way to query from the cmdline if the UPS data is stale? > > The "data stale" state applies to the entire set of variables for an UPS, > so if the exit code of `upsc` is zero, the data set is not stale. > > "upsc" outputs a lot of information, but not if the data is stale.

Hi, the vif scripts (vif-route, vif-bridge, etc.) that come with xen just don't work for me. I don't feel like I need a bridged setup. My ISP insists of routing the IPs of the domUs to my dom0. So now I'm using script=vif-route. But it has some caveats ... The vif-route script turns on proxy_arp, even though the domUs use the dom0 as a default gateway, for everything except their own

Good day all and sorry my English. I have some problem when updating NUT. I have server with 4 UPS connected. When I starting upsdrv and upsd and after sometime (1-2 minutes) I can't get data from ups's # upsc apc at localhost battery.type Error: Data stale and errors in /var/log/{syslog,debug,daemon.log} usbhid-ups[2385]: Got disconnected by another driver: Device or resource busy OS:

I missed that snmp-ups set pollfreq to 30 by default. I'd hope that it would set deadtime to an appropriate value as well than, no? Is there a way to query what the settings are or what the defaults are? I'm going to set POLLFREQ=30 and DEADTIME = 90 and see if that has any effect. I'll check for the logs. And if that doesn't get my anywhere I'll look at trying to simulate

# HG changeset patch # User Brendan Cully <brendan@cs.ubc.ca> # Date 1282083158 25200 # Node ID 74b9fe513d8591ca14233590062079b042abb68d # Parent 774dfc178c39bd3fe2ec14b4f96e60b78391b397 hotplug: 21549:8bcaec29574e breaks vif-script with arguments. For example, (vif-script ''vif-bridge bridge=eth1'') in xend-config.sxp will cause vif-setup to attempt to execute

[please use Reply-All to keep the list CC'd, thanks] On Mar 30, 2015, at 11:04 PM, Jason Gould <jgould at cddiagnostics.com> wrote: > Thanks. I should also mention the freenas server is setup with an lacp lagg. > > I will also mention that even when not setting pollfreq (leave as default) the issue still occurs. > It looks like the default for pollfreq is actually 30 on

I''m using vif-route as my network script. I''ve added set -x to the xen hotplug script change. I''ve also added a command to do a listing of the xenstore directory. Here''s the snippet: == ++ ip= +++ xenstore_read_default backend/vif/4/0/ip '''' +++ xenstore-read backend/vif/4/0/ip xenstore-read: couldn''t read path backend/vif/4/0/ip +++

Package: xen-utils-3.0 Version: 3.0.2+hg9656-1 Severity: normal My setup is a basic one. No changes to the /etc/xen/* files. Network in a domU works perfectly fine. But, after shutdowning a domU, I can see the following lines in /var/log/debug: May 6 10:31:45 vaio logger: /etc/xen/scripts/vif-bridge: offline XENBUS_PATH=backend/vif/18/0 May 6 10:31:46 vaio logger: /etc/xen/scripts/vif-bridge:

I''m finding I cannot use the vif parameter with ''bridge'' only For example: vif=bridge=xen-br2 This errors out: [2005-09-30 14:23:55 xend] DEBUG (XendDomainInfo:1107) Creating vif dom=16 vif=0 mac=None [2005-09-30 14:23:55 xend] DEBUG (XendDomainInfo:665) Destroying vifs for domain 16 [2005-09-30 14:23:55 xend] DEBUG (XendDomainInfo:674) Destroying vbds for domain

I am wondering  what would happen when attempt to create Debian PV DomU at Xen 3.3.1  Suse 11.1 Dom0 via debootstrap , the native way of install  Debian (Ubuntu)  PV Guests  for Xen Systems. I beleve deboostrap RPM for Suse should be on the Net Boris. --- On Sat, 7/11/09, cmasmas cmasmas <cmasmas10@gmail.com> wrote: From: cmasmas cmasmas <cmasmas10@gmail.com> Subject: Re:

Hello, Seeking a way to get the variance inflation factor VIF for a model of regression in complex survey, I have understood that without this package (SURVEY) RGui VIF obtained as follows: fit <- lm(mpg~disp+hp+wt+drat, data=mtcars) vif(fit) But I want to know if survey, Vif is obtained so vif( svyglm(api00~ell+meals+mobility, design=dstrat)) Thank you, happy day

Hi, I've been generating linear models with lm(). I wanted to look at the VIF's for the coefficient. Using the vif() function from the package Design, I would get unusually high VIF's. However using vif() from the car package I get more reasonable values (ie in line with the quality of the model). What is the difference between the two vif functions? (I dont have access to the

On May 6, 2019, at 2:57 PM, Stuart D. Gathman wrote: > > On Mon, 6 May 2019, Gareth Davies wrote: > >> Just to say, I stopped the driver and started it again and the errors went >> away! However, I turned off power to the UPS but I wasn’t receiving any >> e-mails :( also when I rebooted the RPi the driver/service didn’t start back >> up automatically... >>

Yes, I saw that problem and removing the vif line or changing it to vif0 fixed it for me. Aravindh > -----Original Message----- > From: wei huang [mailto:huanwei@cse.ohio-state.edu] > Sent: Friday, November 04, 2005 12:14 PM > To: Puthiyaparambil, Aravindh > Cc: Mark Williamson; xen-users@lists.xensource.com; ewan@xensource.com > Subject: RE: [Xen-users] Error "Device 0

I am trying to setup a driver domain for a NIC. I have passed through the device successfully and set netif=1 in the driver domain config. I also added the config to a guest domain vif=[''backend=7''] (7 is the ID of the driver domain) xenstore-ls /local/domain/7/backend/vif shows that the state of the device is 1 (initializing) (see below the email for the output) On the guest

How to set the vif-route script''s netdev params? I follow the xenwiki http://wiki.xensource.com/xenwiki/vif-route vif=[''script=vif-route,ip=xxx.xxx.xxx.xxx,netdev=eth2''''] will return a error Error: Invalid vif option: netdev -- hepeng ICT _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hi Could you perhaps possibly help me. I would like to use the package VIF but cannot get results I attach the .csv file and my R code. What do I have to do ? Any help is greatly appreciated. library(VIF) coal <- read.csv("e:/freekvif/cqa1.csv",header=TRUE) y <- as.numeric(coal$AI) x <- as.matrix(cbind(coal$Gyp, coal$Pyrite, coal$Sid, coal$Calcite, coal$Dol,