similar to: Xen shows single processor on a dual core system

Hi gang! At work I have a DL320 G2 machine I use as my desktop (I know, weird!...). Back when I ran RHEL WS 2.1 on it, it always ran a SMP kernel because it has a HypterThread capable processor. When I installed (fresh from scratch) Centos 4.4 on it a while back, though, Centos installed only the UP kernel. I've looked in the BIOS for settings to enable/disable HT support and I don't

Hello group, I recently purchased an HP m7360n computer which has an Intel Pentium D 920 processor in it. Unfortunately there is no BIOS option to enable or disable VT. The board it sits on uses the Intel 945P chipset. If I am in linux and do a ''cat /proc/cpuinfo'' I get this: [root@localhost ia32]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family

Hi there, I have the lucky task to setup a Xen system. my plateform is a dell 2950 with 16Gb of RAM. I got as far as setting up debian sarge and xen following http://www.debian-administration.org/articles/423 and overcoming some specific difficulties (http://kmuto.jp/b.cgi/debian/d-i-2615.htm & http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround) But, my concern now, while

I know this is a bit OT, but the subject of CPU speed came up here and I was (and have been for some time) curious: What is the actual speed of an AMD CPU? E.g., I have a Athlon 64 X2 "4200+" but my /proc/cpuinfo shows 1005.164 MHz for the two cores. What do those mean? Is there a reference for this (huge) discrepancy? Also, is there a way (and what) to tell what the actuall running

Even though Doug's out of the office, I'm submitting a patch to the ifcpu[|64].c32 COMBOOT32 modules for testing. Also available for perusal with a web browser at: http://git.zytor.com/?p=users/sha0/syslinux.git;a=commitdiff;h=cc70d0fa5 5e35fabf250f4dccbaed2fa44f56da7 - Shao Miller --- >From cc70d0fa55e35fabf250f4dccbaed2fa44f56da7 Mon Sep 17 00:00:00 2001 From: Shao

Hi, I'm running CentOS 5.5 (on ThinkPad x61). I use KVM to run a SLES 11.0 (32bits, kernel 2.6.27.19-5-pae) guest. The "cat /proc/cpuinfo" got the result: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 6 model name : QEMU Virtual CPU version 0.9.1 stepping : 3 cpu MHz : 0.000 cache size : 32 KB fdiv_bug : no

Hi, Can anyone assist me in resolving this problem? I installed the G729 on a 32 and just found out that the server is 64. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071128/599591ac/attachment.htm

Dear All, I have the following CPU info on my asterisk server: Linux switch1.domain.net 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 12:03:43 EST 2008 i686 i686 i386 GNU/Linux I need to install G729 on the asterisk server just to pass through and not for encoding...Which G729 package do you advice me to install? I tried several packages with no luck Regards -------------- next part -------------- An

hi list, I am happy being able to report, that I got winxp finally to run on my system. I have an ASUS T5600 Core 2 Duo with 1 Gig memory and SATA. Until the todays "apt-get dist-upgrade" I was''t able to get any graphical output out of the SDL-Window, but now it is thete and simply works, wonderful ! I attached my system info. Big thank to the xen-team and the debian people !

Hello! After upgrade to version 2.0, now using 2.0.1, I'm experiencing problems with glusterfs stability. I'm running 2 node setup with cliet side afr, and glusterfsd also is running on same servers. Time to time glusterfs just hangs, i can reproduce this running iozone benchmarking tool. I'm using patched Fuse, but same result is with unpatched.

I believe I have some hardware or configuration related performance issues running samba 3.0.14a-3sarge. Our server is an Intel Celeron 2 Ghz with 512 MB of RAM and a 3ware card using SATA disks in a RAID 5 configuration (3ware controller card). We have a gigabit network and are using Intel Gigabit ethernet cards e1000). When copying large files to the samba shares on the system, the

Hi I am just starting with xen and trying to get a few vm''s running on this pentium 4 system. I tried using virt-install to start things. I am using this link as the install base: ftp://download.fedora.redhat.com/pub/fedora/linux/core/6/i386/os/ , and a local file as hard drive. What happens is that virt-install downloads the kernel, boots, a VNC window for the new VM appears, but it

Sorry for being a bit of a newbie here but I find the docs or README for downloading the G.729 codec from Digium are not as detailed as I would like or just don't really break down the different versions to a point that I am clear on which one to grab. The choices for 32bit are: drwxr-xr-x 3 0 0 4096 Dec 05 00:21 athlon-xp drwxr-xr-x 3 0 0 4096 Dec

I am trying to get to the bottom of audio clicks, pops, dropouts with my Asterisk server. These occur even when the system is under minimal load (e.g. 1 Zap device in a queue being played music on hold) and occurs with both Zap and Sip devices so isn't network related. The audio problems occur at the same time on all channels and seems to be when Asterisk "gets busy" and uses

Hi list, I've recently managed to install CentOS 4.4 on an Apple Mac Pro. Functionality-wise everything works great, but when trying to benchmark the system, I don't get stable runtimes, they differ by more than 30%. For example a benchmark run with our PDE solving code takes between 500 and 800 s on the completely unloaded machine. Suspicious kernel output (complete output attached):

Hey my R buddies, I installed the "snow" and "rpvm" package on my Lenovo Thinkpad T400 today. The experiment below gave me a surprise. The time consumed by serial processing was several times larger than that taken by parallel processing. I'm very curious how this happened. Thank you very much. > library(snow) > > cc <- makePVMcluster(2) > > temp <-

I''ve been trying for several days to get a xen dom0 booting as described on Boris Derzhavets blog. I have been able to boot Jeremy Fitzhardinge''s pv_ops kernel under xen, but my X server wouldn''t start so I''ve been trying to get Andrew Lyon''s rebased opensuse patches to work. I have asked for help in the freenode ##xen channel but they

Hi, I've installed CentOS5.2 on an INTEL Core 2 Duo (Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz), 4 GB RAM (MemTotal: 4072176 kB) and my system gets sevarel minutes to startup, specially on udev daemon. Once the system is UP, every command I run gets 100% CPU and every is very slowly at the point yum -y update never ends. The system installed by default this kernel 2.6.18-53.el5PAE.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good Morning, Any help would be grateful to help me understanding what's wrong... I have bought 2 g729a licenses to digium and I would like to have them works... My processor is an Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (4 processors) so I have downloaded the