similar to: Unable to create more than 1 VM

Hi list, I am running a virtualized server. Dom0 uses Xen 3.2.1 with Debian Etch and a custom kernel 2.6.21 created by my webhosting company. I install my domU using debootstrap for a Debian Etch with 2.6.18-6-xen-amd64 kernel. Everything works well except the fact that once the VM is started I cannot "xm console" into it. It only works while it is booting and while it is shutting

Hi xeners, I am trying to have 2 DomU share a single Logical Volume. I need that at least one of the DomU has read-write access to the LV. I have tried, but up to now, it only works if both DomU have read-only writes to the LV. That''s a problem for me, because I wanted to set up Nginx on a DomU, and Rails on another one, and have Nginx get read access to an LV that would hold the public

I installed xen 3.3.0 on a etch box from sources. I just modified the standard kernel cause of some hardware drivers. I installed xen-tools from backports (3.9-3~bpo40+1). To create a domU ist not the problem. I can connect via ssh and everything works fine. But when i start a domU with "xm create host.example.tld.cfg -c" to login to console from domU it hangs after the message

Hello xen-users ! I am coming for help concerning the just released 4.0 version. Install has worked rather well on my Debian Lenny. I have just had a few bugs for which I have found the answer looking around on this list. I have created a Debian Lenny domU which boots up just fine. The only problem is that I am unable to get a console prompt when using "xm console nameofdomU". I do see

I''m running Xen 3.2 on Debian 5.0 (Lenny) and am having trouble booting up a Debian Etch DomU. It hangs at the end when it says "Starting periodic command scheduler: cron." It''s just completely frozen. At one point I set it sit for a few hours and got back into the console and it said something about "time went backwards" but I used the

Thread stealing is not nice, even if the subject is generic. > Related question - what physical device does /dev/xvc0 refer to? What can > I > connect to get to the agetty running on this device? > xvc0 is a xen virtual console and does not correspond directly to a physical device that I am aware of. Yves-Gaël Chény seemed to have answered the second part of the question: >

Hi, I''m running Xen 4 on Slack64. I haven''t console login prompt to domU until I changed xvc0 to hvc0 on /etc/inittab file. No I have access to login but whenever I try to login I get this error from /var/adm/secure file root@darkstar:/var/adm# cat secure Apr 28 22:49:22 darkstar login[1286]: ILLEGAL ROOT LOGIN on `hvc0'' Apr 28 22:49:45 darkstar last message repeated

Hello everyone: When i starting a linux domU, i get the error message: "xenconsole: Could not read tty from store: No such file or directory" #xm create -c /etc/xen/fc6.cfg Using config file ... ....... xenconsole: Could not read tty from store: No such file or directory ----------------- #xm list Name ID Mem VCPUs State Time(s) Domain-0 0 251

Hi, I keep seeing references to "xvda" in and around xen forums and postings.....what exactly is xvda (yes I''ve googled it and found no explanation)? Thanks M _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hello everybody! My server with Ubuntu Hardy Heron x64 with Xen 3.2 hangs on when booting at "Starting local boot scripts (/etc/rc.local)". My /etc/rc.local is default and I can''t find out why it stops there. It''s possible to SSH to the server and everything works fine. I just can''t do anything from the physical server. I''ve googled but nothing have

Hello, I have installed Ubuntu Interpid in pv domU. It boots fine, but I cannot get any console running. The boot hangs on: * Setting up console font and keymap... [ OK ] * Starting system log daemon... [ OK ] * Starting kernel log daemon... [ OK ] And then nothing happens. My config file looks like that: bootloader = ''/usr/bin/pygrub'' memory = 2048 name =

Hullo everybody I want to install a guest slackeware guest OS on a VM for xenserver 5.6 . I have created logical volumes , mounted the slackware 13 image and copied the /lib/modules and below are my configurations. [root@virtualintranet /]# uname -r 2.6.27.42-0.1.1.xs5.6.0.44.111158xen *Grub Configs:* [root@virtualintranet grub]# cat grub.conf default=0 timeout=10 title

Hullo everybody I want to install a guest slackeware guest OS on a VM for xenserver 5.6 . I have created logical volumes , mounted the slackware 13 image and copied the /lib/modules and below are my configurations. [root@virtualintranet /]# uname -r 2.6.27.42-0.1.1.xs5.6.0.44.111158xen *Grub Configs:* [root@virtualintranet grub]# cat grub.conf default=0 timeout=10 title

Hi all, I installed a paravirt CentOS 5.4 domU on a CentOS 5.4 dom0 environment. I compiled the domU kernel with framebuff console. But I couldn’t using VNC to connect to the domU console. The kernel boot message could print on the vnc console. But after the boot process, the console appears on the text console in dom0 again. The configfile is as follows: vfb = [

Hello, I''m running XEN 3.0.3 on RHEL5 2.6.18-53.1.4.el5xen. I used to start the vm with "xm create myvm -c". I see the boot during a couple of second, then, it freeze. The console is freezed, not the vm, a couple of second later, I can ssh the vm without any problem. "xm console myvm" also display a freezed state. This is an extrat of the console : # xm

Hi everyone,   I am new to using tinc and currently trying to set up a full IPv6 mesh between 4 servers of mine. Setting it up went smoothly and all of the tinc clients do connect properly. Routing through the network works fine as well. There is however a large amount of management traffic which I assume should not be the case.   Here is a quick snapshot using "tinc -n netname top"

[Adding gluster-users] On Wed, Jul 19, 2017 at 2:52 PM, yayo (j) <jaganz at gmail.com> wrote: > Hi all, > > We have an ovirt cluster hyperconverged with hosted engine on 3 full > replicated node . This cluster have 2 gluster volume: > > - data: volume for the Data (Master) Domain (For vm) > - engine: volume fro the hosted_storage Domain (for hosted engine) > >

On 07/19/2017 08:02 PM, Sahina Bose wrote: > [Adding gluster-users] > > On Wed, Jul 19, 2017 at 2:52 PM, yayo (j) <jaganz at gmail.com > <mailto:jaganz at gmail.com>> wrote: > > Hi all, > > We have an ovirt cluster hyperconverged with hosted engine on 3 > full replicated node . This cluster have 2 gluster volume: > > - data: volume for

I was testing ocfs2 on a 2 node cluster set up. ocfs2-tools version is 1.6.3 ocfs2 kernel version is 2.6.36 Using cman on 2 nodes node02 dw # ping_pong -rwm /data/test.dat 3 data increment = 2 14 locks/sec node01 dw # ping_pong -rw /data/test.dat 3 data increment = 2 10 locks/sec node02 dw # ping_pong -r /data/test.dat 3 1980 locks/sec Using cman on 1 node node02 dw #