similar to: Strange dom0 networking error with Debian "Etch" amd64

Hi all, Has anyone seen this before? I''m running a CentOS 5.3 with xen 3.0 and the server has been running fine for a long time. In fact, it was up for 186 days before I had to reboot after the "network died", and I couldn''t fix it. The server has multiple domU''s on it, which all still works when the host node (dom0)''s network dies with these

Here is the situation. I have a xen system with 2 drives setup in a RAID1. I pulled one drive and put it into an identical server. Now, when I boot up the new server, peth1 is not created. [root@dom0 ~]# ifconfig | grep Link eth1 Link encap:Ethernet HWaddr 00:14:38:A7:55:C2 inet6 addr: fe80::214:38ff:fea7:55c2/64 Scope:Link lo Link encap:Local Loopback vif1.0 Link

Hi all, I have a very strange situation, which I can''t explain. On a Core 2Quad server with 8GB RAM, we have 10 xen domU''s, as follows: vps.animalsaregreat.info login: root@zaxen01:[~]$ xm list Name ID Mem(MiB) VCPUs State Time(s) Domain-0 0 512 4 r----- 232.2 actionco.vm

Well where do I start...I have a domU (ubuntu) booting and appears well but I don''t have an eth0 listed at all, dom) looks good. DomU: eth0 Link encap:Ethernet HWaddr 00:06:5B:15:C5:0B inet addr:10.99.99.5 Bcast:10.99.99.7 Mask:255.255.255.248 inet6 addr: fe80::206:5bff:fe15:c50b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Hello everyone. I just installed Xen 3.0.3 in a debian etch box. Linux server1.example.com 2.6.18-6-xen-686 #1 This server1 has two real nic (eth0 with real MAC 00:13:72:57:7B:AE and eth1 with real MAC00:13:72:57:7B:AF). I made a network-bridge custom like this: ----------------------------------------------------------------------- #!/bin/bash dir=$(dirname "$0")

I''ve looked everywhere for the error message I''ve posted in the title, doesn''t seem like anyone else has it (lots of missing hotplugs scripts). We''re using network-nat. ifconfig -a outputs this: eth0 Link encap:Ethernet HWaddr 00:19:99:a8:f4:5c inet addr:X.X.X.X Bcast:X.X.X.X Mask:255.255.255.255 inet6 addr: X::X:X:X:X/64 Scope:Link

Hi I'm very new with Xen (/Debian) I have 2 VMs running Windows: "Arch" and "Sql" -- static IPs VM Arch: is ok, accessible thru VNC, Remote Desktop, see the network, etc VM Sql : - just accessible thru VNC             - once I log in, I don't see the network             - pings don't reach peer             - appear 4 network ports on Windows the server has 4

CentOS 5.5 Xen "standard" Xen Installation. I have two nics. I just put the second one to DHCP and modified the ifcfg-et01 and so far I am holding, but I am not confident. Prior they were sequential IP Addrs on same subnet. arpwatch has indicated flip flips. I can find no rhyme or reason to predict them. I know I missed I must have missed a step somewhere. I want to keep the

Hi, I have 3 xen box with 2-3 VM on each. Each server has 2 nic (1 for external and 1 for internal network). All VMs are webserver and they mount a nfs filesystem. I''ve noticed that on each dom0 there are many dropped packets. Server config is: 1- DELL (2xQuad Xeon E5320 @1.86Ghz - 8Gb Ram - Perc5 - Kernel 2.6.18-6 (debian etch)) 2- DELL (2xDual Xeon 5110 @1.60Ghz - 4Gb Ram - Perc5 -

I have a server running Centos 5.2 as a Xen host. A problem that's shown up recently is that at boot, the dom0 interface eth0 doesn't come up properly, with the result that the host is only accessible via remote console. If I execute 'service network restart', eth0 comes up normally, with an IP address and the correct routing. Three guests have been created via virt-manager

Objet : Xend start and after lose network Hi everybody : My configuration : Dapper 6.06 LTS with all updates Xen 3.0.2.2 My problem : After making ''xend start'', I lose network connections between my server and local network or internet. Nota : domU cas normally access to network I read about a similar problem in the bugtracker (N. 62) but it seems that this is normally

I''ve setup Xen 3.0.2-2 (binary install) on Ubuntu 6.06, got my domUs up and running, got them connected to the Internet but I can''t even ping to any of these VMs. Now I''m not linux/xen genious but could the problem be that xen-br0 doesn''t have an IPv4 address? (it''s got an IPv6 address) Since I don''t use IPv6 on my network this seems a

I''ve just installed Xen on a new CentOS 5.1 system, and I can''t seem to make xenbr0 connect to the network. This system has a single physical network card. Apart from creating a few DomU guests, I have not changed any of the configuration. After running network-bridge, xenbr0 and friends are created, but the address and routing info is not moved. James # ip addr

Hello, I have the following Xen 3.0.2-2 related problem: A host system with Centos 4.4 in the dom0, guest systems are Fedora Core 5 (images from jailtime.org) mounted on LVM. Networking on the domUs is not working, Iptables in the guests are not working either. Each Guest system should have at least 1 dedicated public IP assigned to it, but should have the capability to have more than 1

I am doubtful that the default bridge is active. When I do following no where the bridge name comes how do I make sure bridge is active. openworld:/etc/xen# ifconfig eth2 Link encap:Ethernet HWaddr 00:26:b9:82:42:38 inet addr:192.1.100.150 Bcast:172.21.255.255 Mask:255.255.0.0 inet6 addr: fe80::226:b9ff:fe82:4238/64 Scope:Link UP BROADCAST RUNNING

Hello, When I install xen via yum, using virt-manager to build a machine, I was displayed no options for Shared Physical Device. Here is a pic, just for show http://imgur.com/HiPiY Then, I did yum downgrade xen, got no network options at all. Do I need to restart something or run a script? I want to use peth0. packages (CentOS 5.4): gnome-applet-vm 0.1.2-1.el5 kernel-xen 2.6.18-164.15.1.el5

1: is it possible to use ioemu:sda instead of ioemu:hda ? 2: is ioemu keyword optionnal ? conf seems to work without 3: why d i need to put vfb = [ "type=vnc,vncunused=1,keymap=fr" ] line ? seperate vnc = 1 + vncunused = 1 look identical to me, but are ignored. have the conf parser changed ? 4: during dom0 startup: > * Starting Xen control daemon ... > * Error: either

I am posting the message below again because it did not go through last night. Help! Steve Timm -- ------------------------------------------------------------------ Steven C. Timm, Ph.D (630) 840-8525 timm@fnal.gov http://home.fnal.gov/~timm/ Fermilab Computing Division, Scientific Computing Facilities, Grid Facilities Department, FermiGrid Services Group, Assistant Group Leader.

Hi, I would like to know if somebody can point me out how to configure several DomUs in a private LAN (for example 192.168.100.0/24) and one DomU with two interfaces (one - 192.168.100.0/24 and two - internet). So far I have enabled in xend-config.sxp: (network-script network-route) (vif-script vif-route) My config files have: /mnt/VM/1.cfg:vif = [''ip=192.168.1.3'']

Hello. I need your help, DomU xen network diconnects randomly, how do you monitoring this? When I connect to vnc server in the hosts, DomU is running, then I open the DomU, after that guest network responds. DomU Debian 6.03 over Centos 5.7 and Xen 3.03. My network configuration: eth0 Link encap:Ethernet HWaddr 68:B5:99:78:AA:6D inet addr:192.168.5.230 Bcast:192.168.5.255