similar to: Re: calculating the needed swiotlb in dom0

Hi everyone, i''m currently try migrate my mythtv-server into an xen maschine but the ivtv-driver for my Hauppauge PVR350 doesn''t work. Now, a lot of googling and reading later i''m now here. I''ve an error which i can''t exactly allocate: is it an driver or an xen generated error ? I got with the ivtv-drivers following error: (0.2.x ivtv driver)

[Disclaimer: I realize that I probably won''t get this problem solved as it''s probably an unsual setup. I thought I''d ask, though.] P roblem: ''cat /dev/video0 > test.mpg'' (a simple IVTV test of my hardware mpeg2 encoder) doesn''t work properly under Xen. When this command is run, test.mpg should grow approximately 1MB/sec in perpetuity, and

Hi, I'm experiencing an issue with my x86_64 machine containing a Hauppauge PVR-500 (ivtv) and a Digium TDM400p (wctdm, part of zaptel) PCI cards. Independently of each other both cards work fine, but once the wctdm driver is loaded and mythtv tries to record something on the PVR-500 the wctdm driver freaks out. The error message is see is "TDM PCI Master abort" printed over and

I have this old memory that the kernels used are a hodge podge of backports etc. So for a kernel-smp-2.6.9-55.0.9.EL should I use 0.4.10? Quoted from http://ivtvdriver.org/index.php/Download: The latest stable releases can be found here. Currently this is version 0.4.10 for kernels <= 2.6.15, version 0.6.7 for kernel 2.6.16, version 0.7.4 for kernel 2.6.17, version 0.10.6 for kernels >=

I just managed to get xen 3.2 up and running in Centos 5.1. I installed the rpms from xen.org (first the xen 3.1 then 3.2 rpms) my grub setting in dom0 is title CentOS (2.6.18-xen_3.2.0) root (hd0,5) kernel /boot/xen.gz-3.2 module /boot/vmlinuz-2.6-xen ro root=LABEL=/ rhgb quiet module /boot/initrd-2.6-xen.img where vmlinuz-2.6-xen is a symlink to

Hi I have a working pci with linux (p4 533 768Mb of ram ivtv/sound blaster live,pci graphic card ...) kernel 2.6.16.4. Everything work well, mythtv, named,mail, web, firewall ... I try to compile xen 3.0.2 with this kernel, to add more security (I want to make little domains for the firewall, web ...) xen boot without problem, but I get those error message at the ivtv driver : PCI-DMA: Out

Dear list, I am trying to plot a barchart (from lattice) in B & W, with 10 categories per bar. It seems that the colours are recycled after reachingcategory number 7, which creates a problem interpreting the chart. I therefore have two questions: 1) How do I get more shades? 2) Does anyone have a theme to share with me with distinctive shades in Black & White? Thankful for all the

Dear list, I would like to create histograms for up to three groups, with distincive colour/pattern, in a trellis panel. However, I have not been able to find a way to do this. histogram does not seem to have a group argument. Please help. /Fredrik

Gents, I can compile mplayer on centos 4.5 AMD 64 in native 64 bit mode and it plays the dvd, and also compile for 32 bit mode "gcc -m32" on it also plays the dvd. "mplayer dvd://1". I can compile mplayer on centos 5 AMD 64 in native 64 bit mode and it plays the dvd. However, when I compile in 32 bit on AMD 64 centos 5 I cannot play the dvd. I get: Playing dvd://1 File

Dear all, i''m having problems passing a Hauppage Nova-S2 card to my DomU (Mythtv Backend). Hardware is: HP XW8200 2x 3.0GHz Xeon 8Gb ECC Ram 1x TT3200-S2 card 1x DVBWordl S2 card 1x Nova-S2 card [many other card for other domUs...] Dom0 is Ubuntu 8.04 server LTS. Xen 3.2 from repo. DomU (Mythtv) is a 8.04 (using LVM) both using 2.6.24-23-xen kernels Dom0 configs: lspci: ... 02:01.0

Hi, I am trying to create a table with information from Shapiro Wilk's test of normality. However, it fails due to lack of sample size, it says, but the way I see it, this is not a problem. (See the table of sample sizes (almost) at the bottom). Applying a different function using a similar ftable call is not a problem (See the bottom table). This is R 2.1.0 on Linux (Gentoo). /Fredrik

http://canadaonrails.com/ (when you hover over news and events) I''ve seen this implemented on a few rails sites now and I was just wondering if it is just a simple javascript from the prototype library. Does anybody know of any links on how to do this? Thanks in advance! -- Posted via http://www.ruby-forum.com/.

I keep getting errors in my logs about can not bind to address *.*.*.*:53 address in use.. what did i do wrong in the setup of my server or domain? attached logs and smb.conf along with the output from my provision command. Jeffrey D. Means meaje at meanspc.com Owner / CIO for MeansPC http://www.meanspc.com/ Custom Web Development For Your Needs. (970)308-1298 - The

Did the upgrade by chance install/alter any udev rules causing the UPS devices to now have incorrect permissions? And what user is nut running as? On November 9, 2024 9:58:57 AM EST, Bill Gee <bgee at campercaver.net> wrote: >Running NUT version 2.8.2 on Fedora 40. NUT installed from the Fedora package. CyberPower CP1000AVRLCD connected by USB. > >I updated the system yesterday

Nut should be running as user nut. As far as I can tell, the udev rules have not changed. And the system IS seeing the UPS at a low level. I looked through /dev/ but did not see a device that jumps out as the UPS. ===================== [root at mythtv rules.d]# dmesg | grep -i 0764 [ 2.021485] usb 1-1.8: New USB device found, idVendor=0764, idProduct=0501, bcdDevice= 0.01 [ 2.049515]

Check /dev/hidraw6, as noted in your dmesg output (and any other *hid* devices under /dev). User nut has almost zero privs to devices unless a udev rule changes the perms on the dev for nut . . . On November 9, 2024 1:25:29 PM EST, Bill Gee <bgee at campercaver.net> wrote: >Nut should be running as user nut. As far as I can tell, the udev rules have not changed. And the system IS

Running NUT version 2.8.2 on Fedora 40. NUT installed from the Fedora package. CyberPower CP1000AVRLCD connected by USB. I updated the system yesterday with all the latest Fedora packages. Now NUT will not run. Chasing the issue through the layers, I come to this: ===================== [root at mythtv rules.d]# upsc cyberpower Error: Driver not connected [root at mythtv rules.d]#

Hi Everyone, I hope you guys can help me out. What is the best way to go about using a timer to execute events? I would like to execute a block of code every 24 hours (or at midnight - server time). Is this possible? What I am trying to get at is that I would like to create a new page every 24 hours and have that serve as my front page. Is it possible to route to this ''new

Hi, I am trying to create a simple point system and display the total on my index page. So I have my db basically setup like this: Posts id, body, created_at, user_id Post_points id, post_id, user_id, created_at, value So as you can see I am allowing other users to create points on the post and my db will store who gave the point as well. "value" is the point value which can

I've had fun with nut on RH systems, these are my notes to get it working: Create /usr/lib/tmpfiles.d/nut-client.conf:D? ? /run/nut 0770 root nut - ...the file did not exist, and so the PID folder/file was not getting generated. Then the driver would start. Also had to setup enabled services (still not 100% confident that this is totally correct):[root at emp80 ups]# systemctl list-unit-files