similar to: HP Dl360 G5 with Accelerated iscsi

Hi. I'm looking at a qlogic qle2462 hba for my dl360 g5. The thread http://www.mail-archive.com/freebsd-stable@freebsd.org/msg99497.html mentions a deadlock when system is loaded. Has this issue been resolved? Are there other PCI Express hba's which are known to work with freebsd stable and dl360 g5? -- regards Claus When lenity and cruelty play for a kingdom, the gentler gamester is

Any tips on solving the following performance conundrum: Asterisk 1.8.12.2 running on HP DL360 G5 and G7s tcpdump running to capture UDP 5060/SIP signaling to .pcap files All calls are ultimately B2BUA client -> asterisk -> PSTN Media stays on Asterisk at all times AGI script has exit handler that connects and updates an external database upon BYE from either side. I know that if exit

Hello * this morning I tried to upgrade from pxelinux 3.11 to 3.84 and discovered that the localboot stuff does not work on HP DL360 G3 and G5. The latest syslinux Version I found with a working localboot is 3.36. pxelinux.cfg/default: default harddisk prompt 1 label harddisk localboot 0 implicit 0 timeout 250 This so simple, it should just work, shouldn't it? The

Hello. Recently I've ran into problems with HP Proliant booting off the network with menu.c32. Configuration -- several identical servers: HP Proliant DL360 G5 HP Bios P58 12/26/2006 Bootblock 09/18/2006 HP SmartArray E200i Controller (128MB, v1.20) Broadcom NetXtreme II Ethernet Boot Agent v2.8.5 When localboot is chosen from menu.c32 menu I get standard "PXE-M0F Exiting ...",

Greets Anyone on the list using newer HP G4 or G5 server hardware like DL36X or DL38X with Centos? Or other HP hardware? Are you running Intel, AMD, or both? Are you using SAS or SATA or a mix? Are you using Centos 3, CentOS 4, or starting migration to CentOS 5 Are things rock solid stable without any issues? I know older Compaq and HP boxen have been rock solid for us for years yet we

i'm running on vmware system and HP proliant DL360 G5 servers on wmware, on boot i have the following message: ----------------------------- Applying Intel Microcode update: don't know to make device "cpu/microcode" [OK] ----------------------------- and on a HP proliant DL360 G5 server , on boot i have too the following message: ----------------------------- Applying

The machine in question is a DL360 G3 R03 Xeon DP 3060-512/533 (part number: 322471-421). It's the first HP-branded model we've had so far (previously all Compaq branded). It has 1Gb of memory and a couple of drives on the on-board SCSI controller (setup for mirroring in the SCSI bios). No SMP is setup right now (doesn't get far enough to do anything with it!). In any case, this

Hello Guys, I use Xen Server 3.4.3 version, with kernel xen 2.6.18.194. Recently we change any server for HP DL360 G7 with HP Smart Array P410i Controller, but when i install the Xen and reboot machine, the machine does not back because kernel panic happen. I checked the grub conf and see than after install xen server, the line "kernel /xen.gz-2.6.18-194.el5" has change to "kernel

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

I''ve got a client demanding the use of HP DL380 G5''s, for various historical reasons, for a server room. I''m going nuts trying to figure out if the available CPU''s for them support VT, so I can avoid building them a separate Windows box. Unfortunately, the local web proxy is overloaded, so actually browsing the JavaScript/image loaded web pages for HP is

Hello Mailing List I got a severe network error message at a HP DL360 Server. The kernel log says: ----------------------------------- /var/log/messages ----------------------------------------------------------------- Mar 19 15:45:06 server kernel: do_IRQ: 2.168 No irq handler for vector (irq -1) Mar 19 15:45:17 server kernel: bnx2 0000:02:00.1: eth1: DEBUG: intr_sem[0] PCI_CMD[00100446] Mar 19

Hi. I'm using GlusterFS v1.3.12 (glusterfs-1.3.12.tar.gz) via FUSE (fuse-2.7.3glfs10.tar.gz) on CentOS 5.2 x86_64 (Linux kernel 2.6.18-92.el5) now. The nodes are HP Proliant DL360 G5 (as GlusterFS Client) and DL180 G5 (as GlusterFS Servers). And the connections are all TCP/IP on Gigabit ethernet. Then, I tested self-heal and I found a technical problem about "replace" -- self-heal

The HP DL380 G5 (like many rack servers) has no AMP Mate-n-Lok connector available to attach to a card that needs more power than the PCI bus can provide, like the TDM400P when FXS modules are used. HP has confirmed that there is no part they sell to give you such a connector, and Digium says their business edition folks got it to work, but only by doing nasty warranty-voiding things to the

Hi all, I''ve a Xen server (Xen 3.1 compiled from sources [stable downloaded last wed...], CentOS 5 as the host OS, HP Proliant G5 6Gb ram with Broadcom NetXtreme 2) with 4 guests, each running Windows 2003 just installed, with nothing else. Network is configured with the default bridging script, no changes. I''m using 1 network card only for the moment. All guests run apparently

Hello everyone, once again. We are running into a problem, which has shown now 2 times, possible 3 (once the systems looked different.) The environment is 6 HP DL360/380 g5 servers with eth0 being the public interface, eth1 and bond0 (eth2 and eth3) used for clusterware and bond0 also used for OCFS2. The bond0 interface is in active/passive mode. There are no network errors counters showing and

I have been trying to install CentOS 4.3 on an HP DL360 G3 (with dual Xeon 3.2 GHz, a Smart Array 5i, and two 36 GB disks doing RAID 1 mirroring). I''m doing all defaults (including the disk and LVM setup) and using the "Minimal" checkbox at the bottom of the Custom machine type package selection screen, so it''s a very "vanilla" install. It zips through the

Hi, I''m trying to boot a HP dl360 G5 from via iSCSI from a solaris 10 u4 zfs device but it''s failing the login at boot: POST messages from the dl360: Starting iSCSI boot option rom initialization... Connecting.connected. Logging in...error - failing. Interestingly (and correctly) the authentication method is set to none. I''ve looked at a TCP capture and the box

Hi all, Just a couple of quick questions. I have a HP DL360 G4 (dual 3.0Ghzprocessors). The processors are EM64T. I am using a TE411P in the system. 1. Should I run the a x86_64 Linux (CentOS) or just go with the plain old 32 bit version? 2. This being a dual processor system, should I turn on or off hyper thrreading? Thanks..... -------------- next part -------------- An HTML attachment was

I have several systems running 64bit SLES11SP1. I''m trying to Live Migrate between a couple of them and it''s not working, although the same VM will run on each one starting it manually. The system are not identical. Would one expect migration to work between these two systems? See below. Thanks, James The first system is a ProLiant DL360 G6: Proc 1:2533 MHz Execution

Hi all, I have been trying to solve nouveau issues on my iMac G5 for ages. As far as I can understand it, there is a problem with nouveau and page size mapping. I tried both 64K and 4K page size kernels and the the result is always distorted video. There is an old To-Do list, which says "fix the page size mapping problem on G5/64 bit for exposing fifo regs" on