similar to: Problems with xm migrate --live

Hello, I've got some SIP clients, and an IAX2 long distance provider. Ideally, when a the dialed number is busy I will hear a busy signal. Instead, I get Congestion even though * knows it's busy. Is this a bug or am I missing something? The dial plan, in basically this Dial(IAX2/user@provider/19995551234,,) Goto(failedcall-${DIALSTATUS}) failedcall-CONGESTION plays congestion

Hullo everybody I want to install a guest slackeware guest OS on a VM for xenserver 5.6 . I have created logical volumes , mounted the slackware 13 image and copied the /lib/modules and below are my configurations. [root@virtualintranet /]# uname -r 2.6.27.42-0.1.1.xs5.6.0.44.111158xen *Grub Configs:* [root@virtualintranet grub]# cat grub.conf default=0 timeout=10 title

Hullo everybody I want to install a guest slackeware guest OS on a VM for xenserver 5.6 . I have created logical volumes , mounted the slackware 13 image and copied the /lib/modules and below are my configurations. [root@virtualintranet /]# uname -r 2.6.27.42-0.1.1.xs5.6.0.44.111158xen *Grub Configs:* [root@virtualintranet grub]# cat grub.conf default=0 timeout=10 title

Hi there, I had some off list conversation with Aleksey and wanted to give an update on our findings (s. below). I'm currently preparing a test stack with ldb 1.4.0 (without lmdb support) and samba 4.8.3 build on top of it, to check whether lmdb support causes the mentioned trouble. An on a site note: When compiling ldb 1.4.0 with "--without-ldb-lmdb" a general error

Hi, We are using Vicidial and sometime even when agent disconnects, outgoing call originated by dialer is still active. Since call was initiated by dialer and then bought into meetme conference of agent and we can't corelate this call to any agent channel. When agents are dialing, channels doesn't show calls vicidial2*CLI> show channels Channel Location

Hi All I’m facing problem in bridging two SIP channels . I’m having SIP Trunk with Service Provider. Whenever I make any international call it get through and after some seconds it give error “Bridge stops bridging channels SIP/XXXX-3be3 and SI P/primus-9381” & call drops. May 13 17:25:19 VERBOSE[7491]: -- SIP/primus-9381 is making progress passing it to SIP/7125-3be3 May 13

Hi All I facing problem in bridging two SIP channels . I having SIP Trunk with Service Provider. Whenever I make any international call it get through and after some seconds it give error "Bridge stops bridging channels SIP/XXXX-3be3 and SI P/primus-9381"#12539;& call drops. May 13 17:25:19 VERBOSE[7491]: -- SIP/primus-9381 is making progress passing it to

If you look at the specs on the Dlink box that Primus gives you, you will see that it is SIP. I am sure Primus has a SIP platform because we have played with it. We managed to use it on MSN's SIP phone as well as couple Zultys ZIP2x2 hard phones. Their PC-Phone app is also a SIP soft phone. If you are registering to sip.iprimus.net then it is definitely their SIP platyform not MGCP.

I am sure Primus has a SIP platform because we have played with it. We managed to use it on MSN's SIP phone as well as couple Zultys ZIP2x2 hard phones. Their PC-Phone app is also a SIP soft phone. If you are registering to sip.iprimus.net then it is definitely their SIP platyform not MGCP. David >>> asterisk-users@eol.ca 1/21/2004 6:39:34 AM >>> I'm not sure Primus

Hi, I have the setup of my xp100 plugging into my dlink gateway that i use with a voip provider. I notice that when someone calls my pstn # that goes to the asterisk box it works but when they hang up asterisk does not recognize the hangup. What needs to be done to make it work with a dlink gateway. when i plug the xp100 into my land line jack everything works fine and the xp100 reconizes

hello, i have a config that is with a large domain of rate, from 2kb to 40Mb and i have some problems with i don''t know how to deal with. so here are some classes 2 with q=1000, one with q 200000 and one with q=6400, all have been calculated by htb, in the code i speficien just rate,ceil, no quantum, no r2q, no bursts ($tc class add $IF_INT parent 1:2 classid 1:21 htb rate

Primus in Canada has launched a SIP-based service to replace your business and residential POTS lines with a VoIP version. It's called TalkBroadband and it looks killer: http://www.primus.ca/en/residential/talkbroadband/index.html Basic service for $20 Cdn a month!! Local number portability!! Cheapo Primus LD rates!! They don't care where geographically you plug it in!! When you sign

Hi all, A while back, there was a short thread on using the FXS interface from a Primus TalkBroadBand device (a DLink ATA) as a incoming line for the FXO interface on the TDM400P: Primus <--> DLink ATA FXS <--> TDM400P FXO <--> Asterisk In that thread, a couple of people suggested that this does not work reliabley, and the ATA FXS <--> TDM FXO link 'goes

Hello list, I have been fighting this problem for a few days now. I have changed memory and opened the case and monitored for heat. I have been getting the same panic about every 12 to 24 hours. I can let the system sit idle, or run it under a heavy load (cpu and disk), but the panics dont seem to be related to system load. It looks to me like a dangling pointer in softdep_update_inodeblock,

https://bugs.freedesktop.org/show_bug.cgi?id=75199 Priority: medium Bug ID: 75199 Assignee: nouveau at lists.freedesktop.org Summary: unsupported GT620M in Samsung All-in-One PC DP500A2D QA Contact: xorg-team at lists.x.org Severity: normal Classification: Unclassified OS: Linux (All) Reporter: slappinjohn

Windows join to Samba AD fails, says The following error occurred attempting to join the domain "domain.io" Logon failure: unknown user name or bad password. I test on Samba server: $sudo kinit administrator at MYDOMAIN.IO $klist Ticket cache: FILE:/tmp/krb5cc_1000 Default principal: administrator at MYDOMAIN.IO Valid starting Expires Service principal

Hey, I've checked all over and can't find what I need to know, so I'm posting here. I want to use Asterisk with my Primus VoIP service but it seems I need a username and password to authenticate with at Primus. Has anyone had any experience with this? How did you get it? Is it stored somewhere in the D-Link gateway they gave me? Thanks in advance and sorry if this makes no sense.

Hi list, For a client I am setting up a system which will use T1 PRI from Primus, who offer only NI-1 and NI-2 protocols for D-Channels. Previousely I have only used switchtypes euroISDN and National. Although the documentation says Asterisk does support NI-1 ans NI-2, but wanted to get your opinion if you have used these protocols on an Asterisk box and if there were any things to consider. If

Hi All, I have setup samba 4.3.9-Ubuntu AD DC, I want to setup password policy and account lockout policy to all my domain users. How I can do that. Please somebody give me the steps. -- Vivek Patil Assistant Manager - IT Forgeahead Solutions vivek.patil at forgeahead.io *O* +91 (0) 20 66 44 5900 | *M *+91 9579 216 049 601 Zero One, Level 6, Mundhwa, Pune 411036, Maharashtra, India *W*

Hi All, I have live Samba AD DC running. Suddenly it stopped on RSAT. Both AD and DNS not accessible. Please attached screen shots and help me out as it is my live. -- Vivek Patil Assistant Manager - IT Forgeahead Solutions vivek.patil at forgeahead.io *O* +91 (0) 20 66 44 5900 | *M *+91 9579 216 049 601 Zero One, Level 6, Mundhwa, Pune 411036, Maharashtra, India *W* forgeahead.io *IN