similar to: Xen without APIC

Hi, I am a newbie to Xen. How can I see the Xen hypervisor boot messages? Is there any command similar to dmesg to check the boot log of Xen? Thanks, Bhaskar _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I have a lot of this errors in my Centos stock 4.3 version in an Intel D945gnt motherboard with a Pentium D (dual core) If I disable apic in the grub.conf (apic=off) will I get a performance hit? Im running Asterisk on that machine. 40 is Received Illegal Vector 20 is Send Illegal Vector 60 means you're getting both errors at the same time. Basically it means that the APIC bus messages are

Hi all, I just upgraded my Debian/Etch with Xen3.3 machine to Debian/Squeeze Xen4.0 and now have problems with starting the Dom0 kernel. I always get the error message: Kernel panic not syncing: the kernel parameter noapic is incompatible with xen. My grub.cfg is: menuentry ''Debian GNU/Linux, with Linux 2.6.32-5-xen-686 and XEN 4.0-i386'' --cl$ insmod part_msdos

Hi everyone, I have been struggling with having the clock of Linux VM's (including CentOS 4.6 and 5.1) running very fast under VMWare, no matter what I have tried. My platform: - AMD Turion X2 TL-60 - AMD 690 chipset with integrated Radeon x1250 (probably doesn't concern in this case) - Windows Vista Ultimate x64, all Windows Update patches loaded (no SP1 yet) - 4GB RAM - VMWare

Hi > Maybe I'm missing something, but this has been working flawlessly for > us in Tails so far. What exactly fails? Are you using EFI Handover Protocol? It might explain the difference Thomas

Hello All. I have a dell optiplex 320 that I can install centos5 on using pci=nomsi. That seems to be the only way. After the install grub loads but thats about as far as it gets. It looks like a BIOS bug to me, but I just don't know. I left it sit for a few minutes and it just had the echoed boot params on the screen. I've tried booting with noapic nolapic apm=off acpi=off and noprobe

I am trying to install 5.2 on a new dv7z hp laptop. I use "linux noapic nolapic iommu=off " and I get a kernel dump on rtl8169. I dont need the network to install? how do I ignore the rtl8169 to install. I tried noprobe and then it doesnt recognize my SATA HD controller and I dont know yet which driver to select as I cant do an lspci to see??? THanks, Jerry

Actually your Syslinux config is less relevant than the kernel config file. Indeed Syslinux infers the method to use from the kernel image itself. I assume the .config is public. I will take a look as soon as I can Thomas Le 04/08/2015 14:09, intrigeri via Syslinux a ?crit : > Thomas Letan via Syslinux wrote (04 Aug 2015 09:27:38 GMT) : >> Are you using EFI Handover Protocol? >

Hello! I am running CentOS-5 with latest kernel available by deault (2.6.23). I installed it on a Dell XPS machine having Intel Quad processors (4 parallel cpus). I use it to run a computational program and I need to keep the program running for 1-2 months continuously. I generally boot it in runlevel-3 with network ON without X and use ssh from another machine to connect and run the program

Hi there!! I has been modified the syslinux.cfg file according to the rules to add some boot parameters but since this modification, every time I that I highlight the modified entry in the boot menu and hit the TAB button on my keyboard, the entry's boot parameters is displayed twice and when I try to "backspace" them out, the line again get displayed twice and so on. So my

I had been running CentOS 5 happily on my Sun Fire X4200 M2 systems, then I upgraded the BIOS and iLOM firmware. Now I'm running into what seems to be a fairly common problem with newer motherboards. I cannot boot unless I use the 'noapic' kernel option. If I try to boot the kernel normally, I get the error: "MP-BIOS bug: 8254 timer not connected to IO-APIC" I can

Alrighty. I'm having a hell of a time and I need help. I'll try to give as much information as possible. ---------- HARDWARE ---------- MB: Supermicro PDSBM-LN2+ Intel 946GZ ICH7R + Intel? 82573 Memory: Crucial 512Mb, 1Gb, 2Gb modules matched to above MB. Processors: Intel Celeron 420 Conroe-L, 1.6GHz 512KB 64-bit Intel Core 2 Duo E6320, 1.86Ghz 4Mb 64-bit Intel Pentium E2140

I'm running a CentOS 4.4 VM on a Windows XP host with VMware Server, and have the problem that my clock runs too slow (it happens in VMware Workstation as well). It loses between 30 and 45 seconds every minute! This is a known problem and can be fixed by adding "nosmp noapic nolapic" to the boot command according to VMware tech note ID 1420. However, despite adding these

I'm experiencing some real weirdness trying to get WoW to work in Wine on this laptop I have. It works pretty well (if a bit slow, but I'm willing to attribute that to the Intel graphics hardware) except that, at unpredictable intervals, the Wine process will suddenly freeze -- graphics stop updating and sound goes into a loop. The thing is that, if I run it from a terminal window, I can

Dear, "Xenoppix-x86-64(Xen3.0.2+KNOPPIX-x86_64-5.0.1) CD size" is released. http://unit.aist.go.jp/itri/knoppix/xen/index-en.html Xenoppix-x86-64 exploits latest CPU (Intel Core2 Duo and AMD Athlon64). * Xenoppix-x86-64 boots both X86 and X86_64 linux kernel on HVM of Xen. * Xenoppix-x86-64 looks like KNOPPIX but all packages are replaced for X86_64. * Xenoppix-x86-64 also

I'm installing CentOS 4.4 64-bit Enterprise on a Dell Dimension with and AMD dual core 3800+. When it starts to load eth0 it hangs. I have not found a way to break out of it. Or how to boot at run level 0. So newby Question 1 how do I get it to boot without loading eth0 so I can make changes? Question 2 what is a likely problem and fix. Question 3 what is good documentation and other

Hello All. I have five Centos 4.4 x86_64 (amd fx-62) boxes with 4 gig of Corsair dual channel ram running kernel 2.6.9-42.0.10.EL (smp). The sixth box is the same except for video card and ram. It is using 8gig of GSkill dual channel ram and has a very cheap ATI video card in it. This box will segfault on boot unless I use noapic acpi=off and nolapic. Even with these boot params, the box is not

I have tried in the grub.conf file noapic and apic=off I am still getting the same error message about ACPI in the dmesg output. example: ACPI: PCI interupt .... IRQ 16 eth0: RealTek RTL8139 ... IRQ16 eth0: identified 8139 chip type so ACPI is grabbing IRQ 16 and not letting eth0 have it. (I Think). How do I correctly disable it on my compaq v2000 laptop. I think it is not allowing my usb

Hi, Can a dbuf be in DB_CACHED state, db_holds == 0, b_efunc != NULL while its db_buf is put on the eviction list ? From an ASSERT in dbuf_do_evict(), it appears that it can. If it can, I am wondering what is preventing the following race dbuf_hold_impl() db = dbuf_find(dn, level, blkid); ... if (db->db_buf && refcount_is_zero(&db->db_holds)) {

Hello Everyone, I have a data frame which looks something like this: V1 <-c(1,2,3) V2 <-c(5,6,7) V3 <-c(9,10,11) df <- data.frame(V1,V2,V3) I want to add couple of text files at the beginning of df and save the df as a csv file. The csv file should look something like this: "AAAAAAAA" "BBBBBBBBB" "CCCCCCCCC" V1 V2 V3 1 5 9 2