similar to: Xen3.1 setup-problem: no networking in WinXP-domU

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

Hello @all, thanks for all the helpfull answers in this mailing list. They helped me compiling a new kernel 2.6.10.11 with Xen 2.0.6 (my first one), setting up a dom0 with RAID, LVM and loop devices for domU, integrating a second network as xen-br1 (I''m calling the /etc/xen/scripts/network script from within /etc/init.d/xend to bring up / down the second bridge.) and bootstrapping

Hello all, I had setup shorewall before succesfully with a normal LAN to internet connection. Now I''m connected to the internet via VPN and I got problems with configuring Shorewall. Any help is appreciated. This is my setup: - Gentoo Linux laptop (kernel gentoo-dev-sources-2.6.8.1) with Shorewall 2.0.4 (setup for Standalone one interface) and iptables 1.2.11 - VPN client is

Hallo Mailinglist:), i used xen 4.1 with xend xm a while. I compiled the unstable 4.2 today and most thinks run fine :). I have only one big problem, the network for my guestsystems. It don't want to work. Hopefully somebody can help me. In Xen 4.1 i only wrote the following line in my questconfig: vif = [ "bridge=eth0,script=vif-bridge" ] And everything works fine. This does not

In spite of reading howtos and this mailing list now for several weeks, I am still not able to get the network of my winXP guest connected to the host (opensuse 10.2) or the external network. There are some network interfaces missing on my host (peth0, vif0.0). ifconfig: eth0 Protokoll:Ethernet Hardware Adresse 00:18:8B:B3:1A:AC inet Adresse:192.168.0.66 Bcast:192.168.0.255

Hi, I''m using Xen 3.0.3 on two servers with Debian Etch (amd64). These servers have 10 nics (2 onboard and 8 in two 4-port cards) so that every vm can have its own interface. This worked so far with the Xen Version from Etch with a wrapper script wich started 10 bridges at boot time. But now I''ve updated Xen on one of these server to Xen 3.2.0 from backports.org and now the

Hi I''m testing around with xen 3.0 snapshot from last week. And i''m now having a problem with a xenbr which is based on a vlan if (dot1q). this is all in dom0 os: debian testing network: tg3 I can start the bridge based on my normal physical eth0 which is working without any problems. My clan without bridge is also working. I can start the bridge based on a vlan if with help

Hello, Despite of reading a lot of descriptions I don''t understand the network configuration. I simply have too little experience. I work remote with the machine via ssh. My dom0 is running. I copied an existing installation into a LV and created the following file: # cat /etc/xen/domu-sarge # -*- mode: python; -*- kernel = "/boot/vmlinuz-2.6.18-4-xen-686" #kernel =

Hello. I have installed the SuSE Linux 10 XEN kernel but no domU yet. Now I cannot ping to and from dom0. I get lots of ARP broadcasts from dom0 but dom0 seems to ignore ARP answers. When pinging to dom0 it ignores arp requests. This happens regardless xend is running or not. This happens in the xen kernel only, when booting stock kernel all works as expected. What can I do? Robert

Hi all, this is my first post..well, i hope that I could help all about I know (at time it''s not too much..only at time :p) I show you my problem..I have a vm virtualized with xen 3.1 and xen 3.2. Now, I want to export the same machine to Xen4. When I do this, it''s not possible, the machine don''t like xen4. Do you know about a how-to, manual, or something about this?

Hi Debian Xen Maintainers! Thank you for the former work. The 3.0 Version of Xen works flawlessly. When can I exspect the 3.1 version in say experimental ? Please give me a roadmap ? Best Regards Volker -- ==================================================== inqbus it-consulting +49 ( 341 ) 5643800 Dr. Volker Jaenisch http://www.inqbus.de Herlo?sohnstr. 12 0 4 1

I found on some CPUs an ACPI based HVM chews up a lot of CPU time versuses an APIC HVM, so in Windows I would change the computer type in device manager to "Standard PC" and disable acpi in the domain config. -Ross ----- Original Message ----- From: xen-users-bounces@lists.xensource.com <xen-users-bounces@lists.xensource.com> To: xen-users@lists.xensource.com

Dear all, since it could be of interest for the list, here I post a link to compiled kernel for XEN 3.1 on a DELL PowerEdge 1950 compiled with gcc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21) on a Debian4 distribution. This is provided AS IS AND WITHOUT ANY SUPPORT AND/OR ANY RESPONSIBILITY :-) The first link (7 MB) pack all the files you should have in /boot. The second link (12 MB)

hi all, i want to install xen3.1 on my system, suse linux enterprise server 10 SP1 (kernel 2.6.16.46-0.12). i download the tarball binary file. it contains only "vmlinuz-2.6.18-xen" and "xen-3.1.gz", no initrd. but see the following code in my grub menu.lst, it seems like i need the initrd file. i tried the installation with this binary Tarball, it didn''t work.

Have amd64 xen 3.1 installed on debian etch. Have all the domu file systems in lvm. Problem 1 If I have a xfs files system when I mount it on domu I get this error: Filesystem "sda5": Disabling barriers, not supported by the underlying device XFS mounting filesystem sda5 Ending clean XFS mount for filesystem: sda5 If I mount with nobarriers the message goes away. If I mount under

i have quite some problems getting 2 lans together with tinc, setup is : 2 linuxrouter connected to the inet. behind everyone is a subnet 192.168.0.0/255.255.0.0 with some normal windowsworkstations. these 2 subnets should be merged to one. we already connected the 2 linuxboxes with tinc and it worked smooth. but the subnets behind the routers werent pingable. so I thought we need ethernet

Hi, all I am new to xen, and just try to use the HVM feature of xen3.1. two issues i met: 1. fedora 7 guest can not boot grub is displaying the boot menu, but hang there. and from "xm top", seems the guest exhauses all the cpu. 2. sdl doesn''t work, i always need to use vnc client to connect to the console here are some info about my system. * cat /proc/cpuinfo * cat xm.hvm (my

hi, i need eth1 for an adsl connection via rp-pppoe (pppd). I was able to hide eth1 in Dom0, but how i use this device in DomU? Do i have to load the 8139too modul, to have eth1 in DomU? cu denny -- Sicherheit verständlich http://www.sides.de GnuPG Key http://pgp.upb.de:11371/pks/lookup?op=get&search=0xAB7D3FE0 _______________________________________________ Xen-users mailing list

Hi, I have recently updated one of my systems from CentOs 6.4 to CentOS 6.5. This systems is used as a RIPv2 routing server with quagga which is the termination point of some GRE tunnels. While running CentOS 6.4 I see the multicast packages arriving at the eth0 and the GRE tunnel interface. While running under CentOs 6.5 I can see the multicast packages arriving at the eth0 but not on the GRE

xm list reveals the following information... Name Id Mem(MB) CPU State Time(s) Console Domain-0 0 315 0 r---- 2058.1 Domain-1 11 342 0 -b--- 5.2 9611 Domain-2 12 342 0 -b--- 3.9 9612 Xen seems to be working beautifully but I have not yet figured out how to get Domain-0 to ping both Domain-1 and Domain-2,