similar to: boot problems with 2.6.23.x on 64-bit dom0

hi, I have an 20G archive of pic files which would have to be mirrored onto another server. It contains large JPEGs, around 10k files, one of the servers is located in Boston, the another is in Budapest, Hungary. I use rsync rsync://remote_box/remotedir localdir/ -zcvr --progress --size-only The issue is that the remote server sends the filelist very slow. Looking into the rsyncd process with

sorry, just a small addendum , why this is all about :) i can't run an rsyncd, since the site is hosted on a serverfarm, i have only ftp, http and mysql ;) thanks, -w- Zoltan HERPAI

Hi, As most of you probably already know, a local root exploit was released yesterday which affects kernels from 2.6.17 to 2.6.24.1. Is there an official patch for dom0 and domU kernels, or can the backport of the official kernel patch be used on these kernels? Regards, Zoltan HERPAI _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hello All, I am battling a problem I don't know how to fix... Here is the scenario: Fractionated T1 with 1-6 channels voice, 21-24 channels data. Comes into a box with Digium T100P, splits off data channes with HDLC, to devicec pvc0, This works fine, but I have a routing problem getting to my machines! Here is the current set up... sethdlc hdlc0 fr lmi ansi sethdlc hdlc0 create 44

Hello lartc! I have strange problem setting load balancing over 4 interfaces. Something won''t accept more than 3 interfaces, While setting: ip route add default scope global \ nexthop via 0.0.0.0 dev pvc0 weight 1 \ nexthop via 0.0.0.0 dev pvc1 weight 1 \ nexthop via 0.0.0.0 dev pvc2 weight 1 It''s ok: ip r l default nexthop dev pvc0

All, I am trying to configure hdlc support on T100P Digium card - everything seems ok... but it just does not work at all. I was able to compile all drivers, the light on the card becomes green when I plug T1 link.... but I even can't ping default router IP... there is no data coming back to me, so I am confused completely now. Also I tried both protocols - raw hdlc and cisco hdlc. The

Hi List, I am sorry that I may bring the old question to the community. My question is 1. How can we determine if asterisk is working normally or not ? what kind watchdog process do we have at this moment ? 2. In case the running asterisk is mulfucntion, is there any available way to auto restart asterisk ?? Please advise if you could. Thanks.

Hello, Is there any progress to have Linux 2.6.22 or 2.6.23 as dom0/domU or I miss something ? Is there any web site describe patching procedure ? Currently I use xen-unstable repo. Regards Maciej _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Package: xen-hypervisor-3.2-1-i386 Version: 3.2.0-2 Severity: normal I'm afraid this bug report will be somewhat unspecific. Please let me know what I need to do in order to extract more useful information out of xen. I have done the following to install xen: installed xen-hypervisor-3.2-1-i386, xen-utils-3.2-1, linux-image-2.6.23-1-xen-686 fixed /usr/sbin/update-grub (see bug #455706)

Hello everyone, We have recently turned up a new T1 from McLeod (Midwestern CLEC). It is configured like so: /etc/zaptel.conf: loadzone=us defaultzone=us span=1,0,0,esf,b8zs ;(also tried 1,1,0,esf,b8zs) bchan=13-23 nethdlc=1-12 dchan=24 /etc/zapata.conf: switchtype=national context=pri-in signalling=pri_cpe group=1 channel => 13-23 I can get hdlc0 (and pvc0) up just fine after the

Hey folks, this is my first contact to XEN-users list. So please be patient if I missed something. I''ve searched a lot before writing this email. My problem: I do have a non-VT/Pacifica box (an old IBM Laptop). There I''ve got already Xen installed (Dom0, 2.6.18-xen0). Now I''ve tried to use the newest vanilla kernel from Kernel.org (at this time: 2.6.23-rc8). As commonly

Hi folks 2.6.23 will support xen, but only partially. It lacks support for the driver backends and other dom0 things. We may just built it without xen-linux-system and without hypervisor-compatibility settings, which makes update-grub to include it with all available hypervisors. Or move the image away from /boot, which makes it unusable with pygrub. Bastian -- He's dead, Jim. -- McCoy,

Hi, I''m trying to configure QoS on my linux in the following manner: I have a main link with 64K, so I divided it in 3 classes of 18K, 14K and 9K with an excess (not used for classified traffic, just to be shared) of 23K. This excess should be distributed proportonally among the 3 classes, that is, the class that has more rate should borrow more bandwidth. What is happening is

I want to have a lustre client running on a system with 2.6.23.12 kernel. (The reason is that there is a special patch that is required for these 60+ Quad-Core AMD Opteron systems that we have and the patch is currently only available for this 2.6.23.12 kernel). Does anyone have a recommendation of how I should get a client and then a compatible server? For the server, we only need minimal

List members; I have been reading the digest for some time now and I would like to ask some conceptual questions. I am a telecommunications systems designer and not a software guy, but I have tried and used a number of the tools availabel in the LARTC and Iptables, and many of the other great things included in Linux. We are designing commercial products and I don''t want to ask my

Hello all, I tried these commands (taken from lartc HOWTO). #tc qdisc add dev pvc0 root handle 1: prio #tc qdisc add dev pvc0 parent 1:1 handle 10: sfq #tc qdisc add dev pvc0 parent 1:2 handle 20: sfq #tc qdisc add dev pvc0 parent 1:3 handle 30: sfq When I try to watch at the qdisc statistics with the command: #tc -s qdisc ls dev pvc0 I have this response: qdisc sfq 30: quantum 1516b

Hi, I believe the issues raised by this message are the same as mine, more on a commercial sense than for self use, but mostly the same. I've seen posts where real-life installations are mentioned, but not a reference to how Asterisk is working on production (and productive) environments. Any experiences would be very welcome I believe, not only on pure technical, but wider, sense. Thanks

"Jesper Juhl" <jesper.juhl@gmail.com> writes: > On 31/07/07, 2004 ruffneck <ruffneck2004@yandex.ru> wrote: > > Hello to everybody! > > > > I did read, that Lguest and Xen was merged to upstream and must be in 2.6.23-rc1 kernel, but I can't see it in "make menuconfig". So, what's the deal? Can anybody explain me, how to enable XEN

"Jesper Juhl" <jesper.juhl@gmail.com> writes: > On 31/07/07, 2004 ruffneck <ruffneck2004@yandex.ru> wrote: > > Hello to everybody! > > > > I did read, that Lguest and Xen was merged to upstream and must be in 2.6.23-rc1 kernel, but I can't see it in "make menuconfig". So, what's the deal? Can anybody explain me, how to enable XEN