similar to: two serial port in HVM DomU patch

I am trying to get a CentOS 6.3 serial console to work with IPMI SOL. I think I have everything working but maybe the wrong baud rate on the getty: $ ipmitool -I lanplus -U root -H 10.0.0.14 sol activate Password: [SOL Session operational. Use ~? for help] ?????????? 10.0.0.14 is the DRAC IP address of the CentOS 6.3 box. It accepts the password and connects me to the console but then when I

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

On Mon, Jan 29, 2018 at 07:00:02AM -0500, Pete Geenhuizen wrote: > > > On 01/28/18 20:15, Fred Smith wrote: > >On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: > >>I'm upgrading from CentOS6 to CentOS 7. > >> > >>I run 2 weather stations on C6 and have one of them attached to > >>ttyS0 which is on the motherboard, and the

On 01/28/18 20:15, Fred Smith wrote: > On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: >> I'm upgrading from CentOS6 to CentOS 7. >> >> I run 2 weather stations on C6 and have one of them attached to >> ttyS0 which is on the motherboard, and the other to ttyS2 which in >> on an add-on PCI serial card. >> >> I'm migrating the

I am running Ubuntu 6.06 connected via serial port to an MGE Pulsar Ellipse 800VA. Have just installed NUT 2.0.3, and have problems with connectivity. This UPS was workign via serial connectivity to a BSD system only a few days ago. I have followed the instructions at http://opensource.mgeups.com/install/debian.htm The details... jason@ubuntu:~$ ls -la /dev/ttyS? crw-rw-rw- 1 root dialout 4,

The vm host shows this: # setserial -g /dev/ttyS* /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 /dev/ttyS1, UART: 16950/954, Port: 0xd040, IRQ: 17 /dev/ttyS2, UART: 16950/954, Port: 0xd048, IRQ: 17 /dev/ttyS3, UART: 16950/954, Port: 0xd050, IRQ: 17 # # ll /dev/ttyS* crw-rw----. 1 root dialout 4, 64 Nov 10 12:18 /dev/ttyS0 crw-rw----. 1 root dialout 4, 65 Nov 10 12:18 /dev/ttyS1 crw-rw----. 1

I'm upgrading from CentOS6 to CentOS 7. I run 2 weather stations on C6 and have one of them attached to ttyS0 which is on the motherboard, and the other to ttyS2 which in on an add-on PCI serial card. I'm migrating the weather stations another host running C7 which has a similar hardware configuration.? When I connect the weather station to ttyS0 everything works fine, but when I try

I have been struggling with setting up two serial ports on an HP/Compaq D512S (Intel P4) under CentOS-5. I am not at all sure why these things were not auto-configured when I initially installed the CentOS system from CDs but they were not. I have found various resources on the web and from them uncovered the setserial utility. What I need from somebody is guidance on how to use this utility to

I found litle intrested qemu images on internet Can i use them with xen? Maybe a stupid question _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I hope this is not to far off topic. I have a Windows 2003 guest on a CentOS 5.5 KVM host. I need to use the serial port on the win2003 guest for the application it is serving. I have no idea what needs to be done but it looks like the linux host is trying to use the serial port as the priamary console but I don't really understand what that is or where it is configured. What I need is for

On Sun, Jan 28, 2018 at 12:10:29PM -0500, Pete Geenhuizen wrote: > I'm upgrading from CentOS6 to CentOS 7. > > I run 2 weather stations on C6 and have one of them attached to > ttyS0 which is on the motherboard, and the other to ttyS2 which in > on an add-on PCI serial card. > > I'm migrating the weather stations another host running C7 which has > a similar

CentOS-6.2 We have a dedicated CentOS-5.7 host used for fax reception and transmission that we wish to move to a CentOS-6.2 virtual guest instance. The CentOS-6.2 virtual host has a 4-port serial card installed. lspci -v tshows this this: 03:00.0 Serial controller: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 0 (Uart) (prog-if 06 [16950]) Subsystem: Oxford

I am in the process of migrating from running CentOS 4.8 (32-bit) to CentOS 5.4 (64-bit) on my AMD Sempron(tm) Processor LE-1300 system (it is running CentOS 4.8 32-bit because the disk images are from a previous PIII system), and things are 'interesting' WRT how the Lava Computer mfg Inc Quattro-PCI card is being handled. lspci (on CentOS 4.8 32-bit) yields: 01:0a.0 Serial controller:

The Startech.com pci2s550 can not be remapped to ports 1-4 before the system boots. The company is not supporting linux serial ports as consoles 0-3 , thank you starTech.com. ----- Original Message ---- From: n schembr <nschembr at yahoo.com> To: SYSLINUX at zytor.com Sent: Thursday, November 9, 2006 4:58:50 PM Subject: [syslinux] Serial with syslinux. Can syslinux be upgraded to support

Hi, I've installed Nut 2.0.5 on a RedHat 9 box. I have a GeekSquad 1500 UPS. (GeekSquad is a BestBuy brand) I've found out that it's actually a CyberPower 1500 AVR LCD. I'm using it with the serial cable. I'm unable to get it working with any of the drivers provided with NUT. I've tried cpsups, cyberpower and powerpanel. here's the output of the different drivers

Hi, On a regular FC4 machine there are 76 device file for /dev/ttyS*. I tried running minicom on a Xen machine (domain 0) whose serial port is connected to a different machine (a machine with no VGA/Keyboard/Mouse). It gave the following error: minicom: WARNING: configuration file not found, using defaults Device /dev/ttyS1 access failed: No such file or directory. So I checked, and ls

Hi all! I want to assign a real serialport to my kvm virtual machine via virsh. When I add the following XML snippet to the domain xml, it gets successfully attached but not as I expected it to happen. <serial type='dev'> <source path='/dev/ttyS3'/> <target type='isa-serial' port='2'> <model name='isa-serial'/>

Hello, I''ve got a problem to get a serial output on grub, xen, linux-xen0 and getty. The serial works fine with grub, xen and linux-xen0, but I''m unable to start a console, where I''m able to login. I dont''t get any output. If I change only the getty from ttyS0 to ttyS1 than I''m able to login.. At the attachment you can see what I see through a serial,

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Is it possible to run wine with more than 4 serial ports? Looking through the source I seem to see a hard limit of MAX_PORTS=9, I would like something more on the order of 36 serial ports. I need to run multiple apps with a multi-port serial board, and I am hoping to do it though wine. When I try to set a com port of COM6 in my .wine/config file I get

Hello We have computers which redirect COM2(ttyS1) to SOL(Searial console Over Lan). We have been using pxelinux to boot them with the following pxelinux.cfg/default setting. pxelinux.cfg/default serial 1 19200 console 1 prompt 0 timeout 100 default menu.c32 label Linux Diskless menu label ^Linux Diskless kernel menu.c32 append pxelinux.cfg/linux.menu label Bios Setup