similar to: Dell Poweredge SC1430 Xen Support

Hi list, I have a terrible noise issue with Dell SC1430 + Digium TE110P. The digium card is not sharing interrupts with any other device, as I saw in Dell's BIOS and also with "lspci -vb" command. After changing coax wire, UTP, balum, digium card ... I have found that the problem is in Dell box, so now I'm running the same Asterisk config in other server with the same

The raid card is an Adaptec 2100S. -----Original Message----- From: Josh Paetzel [mailto:josh at tcbug.org] Sent: Saturday, November 11, 2006 9:35 AM To: tclug-list at mn-linux.org; pjcrump at bitstream.net Subject: Re: [tclug-list] Drives Not Recognized on Dell Poweredge 1550 CentOs install On Saturday 11 November 2006 01:20, Phillip Crump wrote: > I have a new (used)Dell Poweredge 1550

I have a new (used)Dell Poweredge 1550 server with 2 scsi drives (dual 1ghz w/ 2048MB) that I'm attempting to install CentOs 4 onto and am having problems getting the darn thing to recognize the hard drives. (it's worth noting that it's running RAID 0 and the RAID bios recognizes both drives as being in "optimal" state). I start the installation process and all is going

I'm having an issue install FreeBSD 10.0 on a Dell PowerEdge w/ the Perc H730P raid controller. I see there has been support added for the controller in the stable version using the mrsas driver. But when I boot up in the installer... it is still trying to use the older mfi driver. How do I get the installer to properly recognize the raid controller? Are there any logs I can provide to help

Hi, This is the env. Dell Poweredge 2900 Redhat ES 4 ( 64 bit ) I installed the rpm''s # rpm -ivh xen-3.0.3.0-1.*.rpm # rpm -ivh kernel-xen-2.6.16.29-3.0.3.0.*.rpm And changed grub. But when I reboot, It hangs on "scrubbing free RAM". What are my option to fix this and get xen working? Joeri _______________________________________________ Xen-users mailing list

The issues I''ve had with PE2650 and Linux in general all related to a lack of IRQ''s. I had to disable all non-essential devices in the BIOS (lpt, usb and com). It seems the BIOS on that server still has legacy IRQ issues (< IRQ15). In my xenU''s I also renamed /etc/sysconf/hwconf so it would''nt try to init any hardware devices directly. Maybe these options

Hello, I am having issues making my box boot with Xen. I am working with linux-2.6.16.28-xen on a gentoo box. The server is Dell PowerEdge 1850 with Perc 4e/Si, FW 521X. When dom0 reaches the point of scanning the SCSI controllers, it hangs in a loop aic7xxx_dev_reset_returns 0x2002. My regular (non-xen) kernels come up fine with detecting my adaptec scsi controller. Had anyone had the same

i, someone can help me with migration from redhat 4 to centos 4 with a dell poweredge machine in RAID 5. i have sequence from old mailist than can migration from redhat 3 yo centos 3 with the next sequence, from Ted Targosz: #### we performed the following steps to migrate a RHEL 3.0 machine to centos 3.7 backup all data Import GPG Keys: rpm --import

This is a really long email...my apologies. Hardware platform: Dell Poweredge 1855 (blade), Dual Xeon 2.8 GHz; 12 MB RAM; PERC 4/IM; mirrored 73 GB U320 SCSI; qLogic 2312 PCI Fibre Channel HBAs. OS: (currently) CentOS 4.3, gcc 3.4.5 Software: Xen 3.0.2-2 Attempting to boot off local SCSI RAID (mirror)...not the SAN. I am more of a Solaris person, so forgive me if I don''t know all

It's Digium, not Dell. I have two identical Dell 1850s, each with the allegedly offensive built-in E100 Ethernet ports. I placed a TE410P card in each. One worked great, the other would not modprobe. Upon examination, we discovered that the two TE410P cards had different firmware revisions. Turns out the one with the older version was the one that worked. We sent the second card back

Hi, recently I came across a deal on a bunch of Dell PowerEdge 2850 servers and I was hoping to use them to run Debian with Xen to provided virtualization support for Windows 2003 and other Debian installations. I was hoping to install 2 copies of Windows 2003 as well as 2 copies of Debian all on top of the DOM0 Debian installation. The servers have dual 3.2ghz CPU''s and include 16GB

There are no issues so far. I am just reporting that CentOS 8.2 (2004) is compatible with Dell PowerEdge R640 after installing it. On 2020-08-12 22:13, Peter Kjellstr?m wrote: > On Wed, 12 Aug 2020 21:46:19 +0800 > Turritopsis Dohrnii Teo En Ming <ceo at teo-en-ming.com> wrote: > >> Subject: [Sharing] CentOS 8.2 (2004) Linux Server is Compatible with >> Dell

Hello, Just chiming in here: >From: asterisk-users-bounces@lists.digium.com >[mailto:asterisk-users-bounces@lists.digium.com] On >Behalf Of >bdolljr@bigskytech.com >Sent: Viernes, 22 de Julio de 2005 01:24 p.m. >To: Asterisk Users Mailing List - Non-Commercial >Discussion >Subject: RE: [Asterisk-Users] Dell Hardware >> Mmhh nice !! So, why did Digium forbid it :)?

I am currently using a Dell PowerEdge server R610 with Xen 4.0 installed and the 2.6.31.13 pvops kernel. I am accessing the server console using the iDRAC KVM feature of the dell management console. Does anyone know how to configure the console option in the grub menu so that all the boot messages can be seen on the mgmt console? Currently I can view only the Xen bootup messages if I dont specify

James, Actually we noticed that we've been running some old setup for our PXE boot/kickstart setup, so we're going to try just doing it with UEFI and see where that gets us. PEV ________________________________ From: James Peltier <james_peltier at sfu.ca> Sent: Wednesday, July 3, 2019 10:47 AM To: Virgo, Paul E. (GSFC-610.2)[ADNET SYSTEMS INC]; CentOS mailing list Subject:

On Wed, 12 Aug 2020 21:46:19 +0800 Turritopsis Dohrnii Teo En Ming <ceo at teo-en-ming.com> wrote: > Subject: [Sharing] CentOS 8.2 (2004) Linux Server is Compatible with > Dell PowerEdge R640 1U Server This server should be fully ok to run RHEL8 and CentOS8. What exactly goes wrong? https://access.redhat.com/ecosystem/hardware/2941651 /Peter K > Good day from Singapore, >

guau..first, i never think the response about my post, really really thanks all, i am not alone here..:-). ok, i send a second message with the other method than i don?t know if result. first, i am install the redhat 3 AS then i will apply the next sequence: "Import GPG Keys: rpm --import http://mirror.centos.org/centos/3.7/os/i386/RPM-GPG-KEY-CentOS-3 Install yum: rpm -Uvh --nodeps

Hi all, I got the previously mentioned Dell Poweredge 2850 with 4GB RAM and Perc4e raid controller. Installation went well and the raid is pretty fast even with level 5. However I have another problem now... CentOS 5.2 only sees 256MB RAM. Googling a bit, got me to install kernel-PAE, this went well, but CentOS still sees only 256MB. Googling some more, I found a bios update was suggested and

Hi All I am getting a strange prblem while installing TE420 on a Dell Poweredge T100 machine. I get a "TE4XXX: version Synchronisation error " nad the machine hangs which needs a hard reboot . Its a new machine and if i install TE410P then installation is successful. Strangely enough i have a working TE420F on another Dell POweredge T100 machine at a different locaiton ... The DELL tech

Subject: [Sharing] CentOS 8.2 (2004) Linux Server is Compatible with Dell PowerEdge R640 1U Server Good day from Singapore, I have just installed CentOS 8.2 (2004) Linux Server on Dell PowerEdge R640 1U Server for "Donald Trump and Xi Jinping Investment Company LLP" (fictitious/fictional company name used) in Singapore on 11 August 2020 Tuesday. I can confirm that CentOS 8.2