similar to: Gentoo dom0 installation issues

Package: xen-utils-3.4 Version: 3.4.3~rc6-1 Severity: important blktapctrl doesn't start. This means that none of the tap: disks work (eg tap:aio). It produces this in the log BLKTAPCTRL[6569]: blktapctrl.c:788: blktapctrl: v1.0.0 BLKTAPCTRL[6569]: blktapctrl.c:790: Found driver: [raw image (aio)] BLKTAPCTRL[6569]: blktapctrl.c:790: Found driver: [raw image (sync)]

Hello. Trying 3.0.3 xen with hvm virtualization it run into an issue that an win 2003 host does install in text mode, but after first reboot only a black screen is greeting me ( after 2 noticable resolution changes ). Win 2000 works fine. hvm config: import os, re arch = os.uname()[4] if re.search(''64'', arch): arch_libdir = ''lib64'' else:

guys, A bit off topic here, but since this issue already has a history here: serial connection to the SCD, the never ending story ... - the intel D945GSEJT mainboard (ICH7) has two serial ports with onboard connectors which require a ribon cable to the external DB9 connectors in the case. I tested 5 cables, but none works. whereas I'm not sure if it is a cable problem. this is what dmesg

lspci dont show Digium card. The motherboard is Intel 945gnt. 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02) 00:02.0 Display controller: Intel Corporation 945G Integrated Graphics Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev

Hi, I''ve set up a domU with video card access per the instructions at <http://www.nvnews.net/vbulletin/showthread.php?t=68703>; video is working quite nicely. However, I''m having some trouble getting the USB keyboard and mouse to work. I have a motherboard with onboard USB 2.0, and a USB 1.1 PCI card. The motherboard USB uses several PCI addresses. If I

I installed a 2 port serial PCI card on a system running CentOS 4.3, but I can't get the additional serial ports to work. The card I used is from StarTech (http://www.startech.com/Product/ItemDetail.aspx? productid=PCI2S550&c=US). When it is detected by kudzu, it shows up as a "NetMos Technologies PCI 9835 Multi I/O Controller". I've included the output of

Hi guys; I'm having a problem with a new pc that has an Realtec ethernet device. Don't know why the driver is not loading and is not detected during installation process. I tried to load r8169.ko unsuccessfully. It load but no device is detected. No dmesg or /var/log/message. ?Any help on how I can configure correctly this ethernet device? This are the data that I have: # lspci

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

I have an IBM System x 3250 that successfully boots using the standard kernel (2.6.18-8.1.10.el5) but fails to boot with the xen kernel. The kernel appears to fail when it attempts to initialize the driver for the onboard SAS controller (LSI Logic / Symbios Logic SAS1064E PCI-Express Fusion-MPT SAS). Can anyone provide any advice? Here's the relevant info. Please let me know if any other

Hi, I am having periodic sound clicks (2-3 per second) on all FXS of a TDM400P when the remote end is my VoIP provider. However: - recording the conversation on the asterisk, does not have the glitches, although I can hear them on a real phone. - My VoIP provider to my VoIP phones through the same asterisk is OK. - TDM to TDM through the same asterisk is OK. I tried with and without

I've got a HP dv8000 laptop. Setting up the wpi driver for wireless freezes the system on boot with the following error: wpi0 requested unsupported memory range wpi0: could not allocate memory resource It lists a pcbi device (pcbi4 i think) and an actual memory range, but since I have to reboot using kernel.old the /var/run/dmesg.boot is wiped with the info. Is there anyway to grab the

I''ve been trying for several days to get a xen dom0 booting as described on Boris Derzhavets blog. I have been able to boot Jeremy Fitzhardinge''s pv_ops kernel under xen, but my X server wouldn''t start so I''ve been trying to get Andrew Lyon''s rebased opensuse patches to work. I have asked for help in the freenode ##xen channel but they

well, as an update, i wiped that hard drive off and replaced it with a larger drive. So I'm now running Ubuntu 10.10. My vid card is an Intel GMA950. Onboard, it sucks, I know. However, this computer WAS playing WoW before I converted it to Ubuntu, so I'm at a loss. Any help would be appreciated. There's NO way I'm going back to Windows, but I haven't played my game now

On Tue, Oct 14, 2008 at 09:52:09PM -0400, John R. Huston wrote: > Hi, I am not very familiar with using mailing lists so if I have made > a mistake in the format or scope of the message please correct me. I > am pretty desperate for an answer by now so any help at all is really > very appreciated. > > I have a Shuttle SD30G2 computer (Specs: >

Please can you do an ''lspci -nv'' to find out the exact version of your controller. I''m wandering whether it features in pci/quirks.c and whether the fixup code is borked on Xen. Also, have you tried fiddling around with any of the BIOS IDE legacy mode settings? There really is no good explanation for a) why the MMIO region is so low on native, and b) why it is

Thanks to the kind person(s) who worked on this. I am using PCI passthrough right now and it works. I hope support is added for VT domains too; That would be extremely useful. So far I have tried a NIC, USB, and PCI Video. The NIC works flawlessly. USB works as long as the devices are present at the time the domain is started. Hotplugging USB devices seems not to work. If I open

Hi All, I'm seeing tapdisk processes not being terminated after a HVM vm is shutdown or migrated away. I don't see this problem with linux paravirt domu's, just windows hvm ones. xl.cfg: name = 'nathanwin' memory = 4096 vcpus = 2 disk = [ 'file:/mnt/gtc_disk_p1/nathanwin/drive_c,hda,w' ] vif = [ 'mac=00:16:3D:01:03:E0,bridge=vlan208' ] builder =

Having some issues getting Galaxies to launch, I can get other programs within Wine to launch like tvants and other basic programs. I'm using Wine 1.1.7 on Mac OSX 10.5.6 with X11 updated to 2.3.3 and Darwine 1.1.9. When I got to launch Galaxies all I get is a terminal page full of errors. I notice Wine is deferring a lot dlls and I don't know if this is the cause of it or not. It also

On 31/08/05, Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> wrote: > Please can you try searching for bios updates etc. I have an almost > identical pre-release Dell machine that Xen works fine on. A00 came installed and is the latest. > Please can you post the ouput of ''lspci -v''. My sata controller is a rev > 03, prog-if 8f, ''Unknown device 5656''

Hello all, I'm new in this forum. I would like to have your help as I am facing the following problem: I've installed the last Gephi release (Gephi 0.8.2-beta) for linux, which is an interactive visualization and exploration platform for all kinds of networks and complex systems, dynamic and hierarchical graphs (http://http://gephi.org/). The Gephi documentation specifies that