similar to: Crashing dom0 by unloading mISDN

Hi all, did somebody successfuly export ISDN Cards to DomU? I want to have 2 ISDN Cards in DomU (for Asterisk with mISDN) lspci -vt -[0000:00]-+-00.0 nVidia Corporation MCP55 Memory Controller +-01.0 nVidia Corporation MCP55 LPC Bridge ... +-05.1 nVidia Corporation MCP55 SATA Controller +-06.0-[0000:01]--+-00.0 Cologne Chip Designs GmbH ISDN

Hello everyone, I have been using an AVM Fritz! card with chan_capi and mISDN for quite a while in PTM mode and it was working finely. Now, I needed more DID/MSN, so I switched to PTP. But now nothing works anymore :( I am using Asterisk on Debian Sarge stable and installed Asterisk along with chan_capi from apt-get. I installed mISDN from the CVS of isdn4linux.de. It is : - Asterisk

Hi, I have installed Asterisk 1.4 with mISDN with the install-asterisk.tar.gz script from beronet.com. On my system I have two cards, one a AVM Frit!Card Pci 2.0 and one HFC-S chip. I know both to work well with mISDN on my system from a previous installation. Now however, the AVM card works well at first glance, i.e. it "registers" incoming calls and works through the asterisk

HI, I tried to install asterisk and mISDN via http://www.asterisk.org/downloads/yum My machine is running with kernel-2.6.18-164.15.1.el5.i686 # grep kernel /var/log/yum.log Mar 21 16:09:28 Installed: kernel-2.6.18-164.15.1.el5.i686 Mar 21 16:09:42 Installed: kernel-devel-2.6.18-164.15.1.el5.i686 I've installed the following packages: # yum install asterisk16-misdn mISDN mISDNuser

Hello, These are error messages I get when I try to call a number over CAPI channel. -- Executing SetCallerID("SIP/xlite1-3b80", "0") in new stack -- Executing Dial("SIP/xlite1-3b80", "CAPI/hfcpci/b17") in new stack > data = hfcpci/b17 > capi request for interface 'hfcpci' == hfcpci: Call CAPI/hfcpci/b17-1 (pres=0x00,

Hello, I have problem with capi, I can't install it. I have putted all info what I did and what I get :). I think you can suggest me how to solve this problem.and thanking you in anticipation. I have ISDN Frtiz!Card PCI v2.1and I want to install it to my ubuntu box (kernel: 2.6.17-10-server). Using command "lspci -vv" , I can see that kernel finds this card: *02:0d.0 Network

I am sitting on thos problem whole day I have never ISDN card in my life. Now I have to runn asterisk with 4 cards very quickly. I have installed chapi_chan and now I pached and recompiled kernel 2.8.1 for mISDN but I don't know how to check that cards are working and should look next step Thanks again for any help I'm Asterisk newbie. Kind regards, Corvin.

Hi, I have switched a while back from chan_capi to chan_misdn. When the number is dialed and the phone is then picked up everything works just fine. Some users however FIRST pick up the phone and then start to dial... I did not get this to work with misdn. When two digits have been dialed, asterisk sees the extension as complete and does not wait for further digits. I am using an midsn NT

Hi All, We've got msidn configured: Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060) iend(0x8fd5060) and running on Asterisk 1.4.21.2: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0

Hello, I am having problems, getting my asterisk-domU to work properly. It consists of the following components: - Debian Etch under Xen-3.1 with a 2.6.18-kernel - Asterisk 1.2.24 - mISDN-1.1.5 I have 2 HFC-ISDN-cards, which I pass through to the Asterisk-DomU in permissive mode. This is working fine. The strange problem is, that the two HFC-ISDN-cards are not beeing initialized by the

Hello, I have some problems with mISDN. I can't send or receive call from the Billion ISDN card Mi configuration files are thoose: extensions.conf: [general] static=yes writeprotect=yes [SOME] exten => 101,1,Dial(SIP/101,30,Ttm) exten => 101,2,Hangup exten => 102,1,Dial(SIP/102,30,Ttm) exten => 102,2,Hangup include => outgoing [outgoing] exten

Hello ! I would like to get working a Fritz PCI card using chan_misdn operating in ptp mode. Afer compiling mISDN into the kernel and building chan_misdn Asterisk stops loading with : [chan_misdn.so] => (Channel driver for mISDN Support (Bri/Pri)) == Parsing '/etc/asterisk/misdn.conf': Found UnLocking config_mutex == Registered channel type 'mISDN' (This driver enables

Hallo all, i have a problem on loading chan_misdn. The misdn is running and all cards (TDM40B+AVMFritz) is initialized. When im going to start asterisk with the chan_misdn.so module i get the following error in the log (on console) and asterisk ist hanging. i use the current CVS-HEAD of asterisk (7 Days old), chan_misdn-0.2.1-rc2 and mISDN+mISDNuser from the automated installation. Is here

Hi. I'm having problems with chan_mISDN configuration. Line "echotraining=yes" causes warning, when Asterisk is parsing misdn.conf and I'm confused why the PBX doesn't accept the setting. No matter which section I try to offer it, it is always invalid or out of range. The setting itself is supposed to be valid, it is in the sample configuration file of chan_mISDN 0.3.1.

I have set up a * box with two hfc ISDN pci cards using mISDN both in TE mode with PmP mode. (using $MODPROBE hfcpci protocol=0x2,0x2 layermask=0xf,0xf) I have no problem dialing out by explicitly naming the mISDN port, ex: Dial(mISND/1/${EXTEN},60) or Dial(mISDN/2/${EXTEN},60) But it does NOT work when specifying the mISDN group: exten => _(outpattern),1,Dial(mISDN/g:TEmode/${EXTEN},60)

Hi, is anybody running asterisk on a xen domU and can give an opinion on the following: I have delegated a FritzCard and a HFC card to my domU and installed an asterisk setup that was running on the same isdn hardware but on a dedicated machine flawlessly. I experienced what I believed to be timing problems: sometimes calls on the Fritzcard did not seem to "reach" asterisk, when

I'm now up&running with - mISDN with avmfritz driver for Fritz PCI card - chan_capi from debian recompiled with a patch (see below) - EuroISDN with Point-to-Point (ptp) mode (Austria) - With Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k from debian sarge But am having some problems: 1) I needed to patch chan_capi.c from debian sarge (see below) to give the new channel to asterisk in state

Hi, can anybody comment on the cost of matching with IPP2P vs. Layer7. Also, does a iptables rule with more complicated matching mechanism also slow down processing if all the packets are matched before they reach the rule. I.e. is the mere existence of a potentially costly rule already slowing down processing or only if packets are actually processed by it? Thanks very much in advance.

Hi, it seems that there is a bug in asterisk's dtmf mode autodetection. Assume following sip.conf: [sipprovider] disallow=all allow=g726 dtmfmode=auto DTMF does not work. It seems rfc2833 mode is chosen despite it being obvious that this cannot work! The following configuration is necessary to get DTMF to work: dtmfmode=info In my opinion, this behaviour is counter-intuitive. I am using

Hello, list a have a problem i can start asterisk, i get the fowlling error: [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Feb 11 13:50:36 NOTICE[2535]: chan_capi.c:2636 load_module: CAPI not installed! Feb 11 13:50:36 WARNING[2535]: loader.c:345 ast_load_resource: chan_capi.so: load_module failed, returning -1 Feb 11 13:50:36