similar to: [HOWTO] Xen 3.1.0 on Debian etch amd64

Hi there, we have a problem with dahdi and overlapdial. We are running an E1 in Germany and are in need of overlapdial. The E1 is connected to a Sangoma A101. As soon as overlapdial is set to "yes" we have problems with incoming audio on the dahdi channels. When set to "no" all audio is fine. Basically we can choose between being able to receive calls or to place calls

Hi, I'm looking for binaries of Samba 3 for AIX 5.1 The ones availables on Samba's FTP ( http://us3.samba.org/samba/ftp/Binary_Packages/AIX/ ) are given for AIX 5.2 or 5.3 (what is said in the README) I found references to 3.0.21 packages (like in this message http://lists.samba.org/archive/samba/2006-January/116792.html ) that had existed, but this one is no longer avaible :( So, do

Hi, How could i know the processor architecture whether this is x86 or x86_64 ? arch returns the architecture of the OS installed on the machine. But what happened when i installed x86 dom0 on x86_64 machine, then arch and #uname -a as well as #xm info all shows. x86, but really the machine is x86_64. Could anybody tell me how i can get the system information that this is x86_64 machine. Is

Hello list, when using Xen on our Bladecenter with the advanced management module everything works fine, but as soon as I switch the KVM to another blade and then switch back to xen machine, vga output is unavailable (due to wrong resolution or hz frequency? But it works if I don''t switch away). The machine itself works, only vga output is gone after switching kvm away from the box.

Hello everybody, I am in the process of setting up a really cool xen serverfarm. Backend storage will be an LVMed AoE-device on top of DRBD. The goal is to have the backend storage completely redundant. Picture: |RAID| |RAID| |DRBD1| <----> |DRBD2| \ / |VMAC| | AoE | |global LVM VG| / | \ |Dom0a| |Dom0b| |Dom0c| | |

Hello, Does anybody know something about Xen PV drivers for FreeBSD? As far as I know there are no stable Xen PV-drivers for FreeBSD at the moment. But what about experimental drivers? Please, if you have any information about this, tell it. I think it would be interesting not only for me but for all who runs HVM domains FreeBSD. And the second question. I run FreeBSD in domUs

Hello everybody, I am running 1.2.10-BRIstuffed-0.3.0-PRE-1s with florz-patches on Linux 2.6.16 with 4 HFC-Cards in TE-mode connected to 4 PtP ISDN-"Anlagenanschluesse". There are about 40 SIP-clients connected (mostly Sipura/Linksys PAP2, and some SNOMs and softclients) to this server. Everything works fine, except that my CDR reports some very long _concurrent_ calls from one sip

Hi there, I'm using xen-3.0.2.2-86.1_rhel4.1 on a Redhat AS 4 update 1 for i386. When I create a new domU with the following conf file, everything is ok: ##BEGINNING## kernel = "/boot/vmlinuz-2.6.16-xen3_86.1_rhel4.1" ramdisk = "/boot/initrd-2.6.16-xen3_86.1_rhel4.1.img" builder='linux' memory = 1024 name = "myvm" vcpus = 8 vif = [

Hi Guys, I''m trying to figure out why Mysql won''t start on this domU and I''m hoping you can help. Here''s what I''m getting: [root@neriah ~]# service mysqld start Timeout error occurred trying to start MySQL Daemon. Starting MySQL: [FAILED] [root@neriah ~]# tail /var/log/mysqld.log 050810 04:21:09 mysqld

Hi, [1] Are there guides for setting up a virtual switch for use in between guest domains in Xen ? [2] In Xen, is it possible for a guest domain to perform a initial dhcp IP lookup from another guest domain ? How are the configurations like ? Are there references or step procedures ? Kindly advice. Thanks. _______________________________________________ Xen-users mailing list

Hello, I''m doing one emergencial migrate for one very old machine, because we will have one IMPLOSION (!!!) very close from here, and I''m thinking that this old IDE disk will not survive... :-/ [root@registro-2 /root]# df -h Filesystem Size Used Avail Use% Mounted on /dev/ida/c0d0p2 3.8G 2.3G 1.4G 62% / /dev/ida/c0d0p8 26G 20G 4.4G 82% /data

I was able to solve the problem with the following configuration: label custom1 MENU custom1 kernel pxechain.com append ::custom1/pxelinux.0 label custom2 MENU custom2 kernel pxechain.com append ::custom2/pxelinux.0 configdir1/pxelinux.cfg/default configdir2/pxelinux.cfg/default Then I dropped the custom pxelinux.0 files in their respective directories, confgdir1 and configdir2. On Tue, Nov

Hello. I''ve just started with Xen and configuring Dom0. My hardware is Core2Duo based Xeon server and I installed Debian etch for amd64 architecture. The Xen related pachages installed are the following. linux-image-2.6.17-2-xen-amd64 linux-modules-2.6.17-2-xen-amd64 xen-hypervisor-3.0.3-1-amd64 xen-tools xen-utils-3.0.3-1 xen-utils-common My problem is that when xend is

Hi all, i have a question. I''m going to setup a Xen server for a client. It''s going to serve about 25 clients. It''s a Athlon 64 3200+, which currently runs Debian i386-stable and xen 2.0.7 until Xen 3.0 is stable enough, and then i''m gonna replace it with Debian amd64-stable and Xen 3.0. The Xen dom''s consists of: Samba , file printer sharing most

Hello all-- Due to a proposed changeover to build machines for a project I'm involved with, I need at least glib 2.19. Right now I have glib 2.12, and even on CentOS7-32 bit, what I see is glib 2.14. Is a higher glib available anywhere that might work with my current 6.8. I see I can download it from SourceForge but I am wondering what the results might me. I really like CentOS and would

I am curious partly because it has occurred randomly in my asterisk system. How does one go about creating a .call file for placing a call between two extensions/phones? I know this has been mentioned and is probably in one of the wikis somewhere, but I am unsure exactally how to go about doing it. Can anyone point me in the right direction. Dan

Hi, since hostid is stored in the label, "zpool import" failed if the hostid dind''t match. Under certain circonstances (ldom failover) it means you have to manually force the zpool import while booting. With more than 80 LDOMs on a single host it will be great if we could configure the machine back to the old behavior where it didn''t failed, maybe with a /etc/sytem

One is expected to use `git llvm push`. For more information, please see: https://llvm.org/docs/GettingStarted.html#for-developers-to-commit-changes-from-git > On Sep 3, 2019, at 7:06 PM, David Greene via cfe-dev <cfe-dev at lists.llvm.org> wrote: > > What is the expected way to do commits? Do we push directly to master > after a rebase? I know there has been talk of using

Hi Bjoern, I’m a bit worried about taking symbols from modules, because some of the > symbols might change later when the code was compiled with the JIT Symbol names shouldn't change from the moment they're added to the JIT (i.e. after being fully mangled). Consistency of symbol names is a requirement for ORC to work. You could try hooking into the orc::Platform API for this:

Hey Lang, That is really cool :D Is the creation of that table a Windows thingy or is this the way the LLVM handles it? Also… since it is COFF related – the never ending story of “finding my global constructors” first of all: Yes! I tried using the “initialize” function of LLVMJIT – however this only worked when I was loading a Module. When I added the object file (from the same source) the