Displaying 20 results from an estimated 700 matches similar to: "Number of xenbr''s limited to four on openSuSE 10.2 ?"
2008 Feb 01
3
No peth interface for xenbr4 and xenbr5
Hello all,
I have a Xen server with 6 network interfaces, I want a bridge on
all of them.
I use a personal network script like this :
#!/bin/bash
dir=$(dirname "$0")
"$dir/network-bridge" "$@" vifnum=0 netdev=eth0 bridge=xenbr0
"$dir/network-bridge" "$@" vifnum=1 netdev=eth1 bridge=xenbr1
"$dir/network-bridge" "$@"
2008 May 21
2
outgoing domu network dies after a while
I have a OpenSuse 10.3 with xen 3.1.0 running and it''s been running fine
for a few months.
This past weekend it suddenly started to act up and after some
troubleshooting I can now say that it seems like the guests(domU) loose
the outgoing network pipe, from the console I can see that the TX
counter is stuck at the same value but it''s no errors. It behaves as if
whatever I try to
2008 Sep 09
14
Problems with bridged networking
Hi,
I''m using Xen 3.0.3 on two servers with Debian Etch (amd64). These
servers have 10 nics (2 onboard and 8 in two 4-port cards) so that
every vm can have its own interface.
This worked so far with the Xen Version from Etch with a wrapper
script wich started 10 bridges at boot time. But now I''ve updated Xen
on one of these server to Xen 3.2.0 from backports.org and now the
2007 May 23
0
mac addresses on xenbr/vif
Hi,
does somebody know, if there is any documentation available on how to set
mac addresses on virtual bridges / virtual interfaces?
Keeping track of every mac in the particular segments is really impractical.
Thanks for any suggestions!
--
Stephan Seitz
Senior System Administrator
*netz-haut* e.K.
multimediale kommunikation
zweierweg 22
97074 würzburg
fon: +49 931 2876247
fax: +49 931
2005 Dec 14
1
HELP: xenbr on vlan if --> tcp checksum error
Hi
I''m testing around with xen 3.0 snapshot from last week. And i''m now having a problem with a xenbr which is based on a vlan if (dot1q).
this is all in dom0
os: debian testing
network: tg3
I can start the bridge based on my normal physical eth0 which is working without any problems.
My clan without bridge is also working.
I can start the bridge based on a vlan if with help
2009 Sep 09
4
waiting IOs...
Hi,
We have a storage server (HP DL360G5 + MSA20 (12 disks in RAID 6) on a SmartArray6400).
10 directories are exported through nfs to 10 clients (rsize=32768,wsize=32768,soft,intr,nosuid,proto=udp,vers=3).
The server is apparently not doing much but... we have very high waiting IOs.
dstat show very little activity, but high 'wai'...
# dstat
----total-cpu-usage---- -dsk/total-
2011 Nov 18
5
XEN multiple bridge problem - VM won' start!
Hi,
I've been using CentOS & Xen on a server that has 2 VM's configured. The
default configuration includes one physical iface that is propagated (by a
default bridge) to the VM's.
Since I wanted to configure additional physical iface, define a new bridge
and propagate it to the viface-s of the VM's, i configured the bridge/phys.
iface and brought it up (here are
2017 Nov 01
2
Centos and xen network bridge issue
Hi All,
We have a single Centos 5.11 server running a xen hypervisor that went
down hard after an extended power outage this weekend. I'm mostly
familiar for KVM as that is the majority of what our guests run under
and have tried getting up to speed on xen bridging to no avail.
The problem is that after the xen server spun back up, the previously
defined xen bridges were lost. I've
2008 Jun 21
5
Poor network performance on Dom0 [2.6.18-6-xen-amd64]
I am experiencing poor network performance on Dom0. When i ping other
hosts on the same LAN, packets are out of order, and they show
response times ranging from < 1 ms to several seconds, and some
packets get lost.
For example, a typical ping result looks like this:
87 packets transmitted, 80 received, +3 errors, 8% packet loss, time 86038ms
rtt min/avg/max/mdev =
2009 Nov 12
20
VIRQ_CON_RING
Is there any real user for this vIRQ? I''m asking because, while debugging
a problem that required to add some printk()s that could temporarily issue
at a high rate, I ran into the situation that this extra output prevented
guest/dom0 boot from making any progress. As I then realized this was
due to the tasklet_schedule() called from inside the console handling
code, which resulted in
2009 Nov 12
20
VIRQ_CON_RING
Is there any real user for this vIRQ? I''m asking because, while debugging
a problem that required to add some printk()s that could temporarily issue
at a high rate, I ran into the situation that this extra output prevented
guest/dom0 boot from making any progress. As I then realized this was
due to the tasklet_schedule() called from inside the console handling
code, which resulted in
2012 Jun 08
18
[PATCH 0 of 4 RFC] Populate-on-demand: Check pages being returned by the balloon driver
Populate-on-demand: Check pages being returned by the balloon driver
This patch series is the second result of my work last summer on
decreasing fragmentation of superpages in a guests'' p2m when using
populate-on-demand.
This patch series is against 4.1; I''m posting it to get feedback on
the viability of getting a ported version of this patch into 4.2.
As with the previous
2008 Sep 26
0
Centos multiple bridging
Hi @all,
I tried to setup xen 3.3 on centos 5 Update 2. I used the following packages:
http://bderzhavets.blogspot.com/2008/08/install-xen-3.html
The server has 4 physical network interfaces and i want to use them all.
eth0 => only for host (configured with static ip)
eth1 => first vm (configured with static ip)
eth2 => second vm (configured with static ip)
eth3 => all other vm
2011 Jan 05
7
Xen Netloop module missing
Hi,
I was hoping someone on this forums could help me out with a problem I
was facing with Xen.
When I compiled the kernel for Xen-3.1.3 using "make world"(I know this
is an old version but I need to use it for some compatibility issues),
the kernel was missing the Xen netloop module. There was no
/kernel/drivers/xen/netback/netloop.ko in the newly compiled kernel. I
think we would
2010 Mar 05
4
Syslinux 3.85 chain.c32 problem solved
Thanks to debugging information from Thomas Mieslinger, I have
root-caused the failure of chain.c32 in Syslinux 3.85. I have put out
Syslinux 3.86-pre1 and Syslinux 4.00-pre33 which fix the problem.
I expect to release a Syslinux 3.86 relatively shortly (ideally in the
next two weeks), with bug fixes only. I would like to figure out if
there are other bug fixes we can get in in reasonable time,
2010 Mar 17
11
Checksumming problem in pv_ops dom0 kernel / netback
Hello,
I seem to be having some troubles regarding the latest 2.6.31.6 and 2.6.32.9 Xen dom0 pv_ops trees.
Our platform:
-Xen 3.4.3-rc3 (also tried 3.4.2 on 2.6.31.6 pv_ops dom0)
-2.6.32.9 pv_ops dom0 kernel, perhaps a week old checkout from xen/stable git (can provide changeset if requested).
-100+ domU''s, all PV.
Ever since we switched to a pv_ops dom0 kernel (we were using 2.6.26
2006 Jan 05
1
vif''s disappear after dom1 reboot
Today I found I can not ping some of my domU''s. I logged in to dom0,
did a "xm list", all domU are there. Then I did a "ifconfig" and
surprised to find some of vif''s disappeared!
Like for example. "xm list" show dom13 is alive, but "brctl show"
shows no vif13.0.
If I "xm console 13", there''s some message:
WARNING:
2013 Apr 30
3
flashing a BIOS on an HP server
Hi, folks,
Since I've gotten a total of one response in days on the HP forum,
maybe the collective mind here has an answer.... As I've mentioned in
other posts, we have an HP dl580 g5 that started throwing ECC errors.
But wait, it's worse: memory is mirrored.... And the thing is fully
populated with 32 DIMMs.
I took my best guess, pulled the matching set of DIMMs, and took two
2010 Jul 27
9
HVM Network Interfaces
Hi Everyone,
In my HVM guest''s config file, I have given my guest 3 interface. I have
called them fw1, fw2 and fw3. I have joined each interface to a bridge
on the Dom0. This does appear when I do a "brctl show". However, there
are 3 other interfaces also added called tapx.0,tapx.1 and tapx.2 (Where
x is the domain ID for the guest). Furthermore, I am only able to run
2010 Dec 09
0
[PATCH linux-2.6.18-xen] make netloop permanent
Hi,
with reference to RH BZ#567540 [0], this patch makes the netloop module permanent (like netback is currently). It reverts parts of xen-unstable c/s 9019:271cb04a4f2b [1] [2] (though that has a typo: "__init clean_loopback", so it was probably changed later too).
The patch fixes the problem of "rmmod netloop" hanging, resulting in blocked tasks and inability to shut down