similar to: HP ML115 and VM extensions

Hi list: I'm having problems, with a AEX800P card when plugin on HP ML115 G5 Server, when i load the mdule (wctdm24xxp), it loads with error con dmesg, that say that is a kernel bug of invalid OPCODE 000 or something like that. If i plug the card on SUN Server, i don't have problems with the card, but the server's nvidia video card stop working :-S Any idea? Thanks. --

I''ve just uploaded 0.9.11-pre12 of the GPL PV drivers for Windows. Since -pre10 (and -pre11) I''ve fixed a heap of crashes that were plaguing xennet under load, and also rewritten the interrupt/event distribution logic to improve performance. Under windows 2003 I can now get network speeds of 1-2Gbit/second TX and 600Gbit/second RX, which is considerably better than I was

I''ve just uploaded 0.9.11-pre12 of the GPL PV drivers for Windows. Since -pre10 (and -pre11) I''ve fixed a heap of crashes that were plaguing xennet under load, and also rewritten the interrupt/event distribution logic to improve performance. Under windows 2003 I can now get network speeds of 1-2Gbit/second TX and 600Gbit/second RX, which is considerably better than I was

Has anyone had any success with the HP T/R2200 G2? I have used the T/R2200 with nut a few times before and it works great, but the G2 doesn't want to talk to me. I have tried bcmxcp from 2.0.4, 2.2.2, and svn, as well as the usb drivers. Maybe the G2 isn't a rebadged powerware unit? Thanks James

Has anyone had any success with the HP T/R2200 G2? I have used the T/R2200 with nut a few times before and it works great, but the G2 doesn't want to talk to me. I have tried bcmxcp from 2.0.4, 2.2.2, and svn, as well as the usb drivers. Maybe the G2 isn't a rebadged powerware unit? Thanks James

I''ve just made my first ever attempt at an Nullsoft installer, so if you want to try it download "Xen PV Drivers 0.9.5.exe" from http://www.meadowcourt.org/downloads/ The installer should detect the version of windows you are running and install the drivers. At the moment you''ll need to install the shutdown monitor service manually, but you can do that from the start

I''ve just made my first ever attempt at an Nullsoft installer, so if you want to try it download "Xen PV Drivers 0.9.5.exe" from http://www.meadowcourt.org/downloads/ The installer should detect the version of windows you are running and install the drivers. At the moment you''ll need to install the shutdown monitor service manually, but you can do that from the start

Is there a way to get Windows to do an orderly shutdown (eg simulate a power button press) using the ''xm shutdown'' command? Thanks James _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Le vendredi 11 novembre 2005 ? 01:21 -0800, Duane Storey a ?crit : > This is a very real problem though.. I've encountered many sound cards that > use different clocks for input and output (even on the same card!) Also, if > you open up a sound device on windows at 8kHz, the microphone is often > around 8100Hz, while the output is 8000Hz.. I'm not sure if there's a bug >

Just reporting some iperf results. In each case, Dom0 is iperf server, DomU is iperf client: (1) Dom0: Intel Core2 3.16 GHz, CentOS 5.2, xen 3.0.3. DomU: Windows XP SP3, GPLPV 0.9.12-pre13, file based. Iperf: 1.17 Gbits/sec (2) Dom0: Intel Core2 2.33 GHz, CentOS 5.2, xen 3.0.3. DomU: Windows XP SP3, GPLPV 0.9.12-pre13, file based. Iperf: 725 Mbits/sec (3) Dom0: Intel Core2 2.33 GHz,

I have a HP T1500 INTL that isn't picked up under 2.4.3. I added the USB device ID to tripplite-hid.c like: /* HP T1500 INTL */ { USB_DEVICE(HP_VENDORID, 0x1f09), battery_scale_1dot0 }, and it seems to work just fine: # upsc UPS1 at localhost battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 30 battery.temperature: 23.9 battery.type: battery.voltage: 40.9

I understand that all work is going into xen3, but I had wanted to note that aoe (drivers/block/aoe) is giving me trouble on xen 2.0.6 (so we can keep and eye on xen3). Specifically I can''t see nor export AOE devices. As a quick background on AOE, it is not IP (not routable, etc), but works with broadcasts and packets to MAC addresses (see http://www.coraid.com). (for anyone who

On Sun, Jun 8, 2008 at 3:28 PM, James Harper <james.harper@bendigoit.com.au> wrote: > I''ve just uploaded 0.9.8 to http://www.meadowcourt.org/downloads > > As a reminder, the wiki page is > http://wiki.xensource.com/xenwiki/XenWindowsGplPv > > This release fixes a bug which could be hit under high disk load (high > number of outstanding requests with fragmented

I really need to have the ability to tie event channel port''s to interrupts for my gplpv drivers under Windows. Is anyone working on anything like this? Does MSI allow more than one interrupt per PCI device? Thanks James _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Hello, All, Today one of our servers was crashed, after I rebooted the server, one vps can not boot up, and it needs fsck, after I run fsck command, a lot of files lost, and also some file content was changed. Not sure how could it happen, do you have any advice that can avoid this or recover the data? Thanks. _______________________________________________ Xen-users mailing list

''xm block-attach'' doesn''t let me assign the same backend device anymore, even if I use ''r!'' or ''w!''. I think this has changed since 3.1.1 (or maybe since 3.1.0). Is this the way it is supposed to work? Thanks James _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

I''m just doing some testing on the gplpv drivers with different ways of handling interrupts, and I''m trying a scheme where each xen device (eg vbd/vif) driver attaches to the same IRQ as the pci driver, and each handles it in sequence. In testing though, I noticed the following when logging what each ISR is doing: 60.32381439 - evtchn event on port 5 60.32384109 - port 5

I''ve recently noticed that my windows crash dumps fail at around 40-50% under GPLPV. ''xm dmesg'' shows the following: (XEN) grant_table.c:350:d0 Iomem mapping not permitted ffffffffffffffff (domain 865) At first I thought that the cause was just a bug in my grant ref code but it just occurred to me that this could be happening when Windows tries to write out the

I am having problems with save/restore under 3.3.1 in the GPLPV drivers. I call hvm_shutdown(xpdd, SHUTDOWN_suspend), but as soon as I lower IRQL (enabling interrupts), qemu goes to 100% CPU and the DomU load goes right up too. Xentrace is showing a whole lot of this going on: CPU0 200130258143212 (+ 770) hypercall [ rip = 0x000000008020632a, eax = 0xffffffff ] CPU0 200130258151107 (+

Hi, DomU is a Win2008 R2 64 When i install the GPLPV drivers the network latency goes from 15ms to random numbers up to 1200ms and eventually dies. If you run a ping from the DomU to another host the network stays alive but the high latency is still there. Further more if i try and uninstall the network driver i am unable to use the old one (realtek) as it cannot detect the device.