similar to: XEN FC6 networking bug

hello, sorry that I post it here again, as I have already posted it on www.redhat.com/archives/fedora-xen/. Now I am working on fedora6Xen,i.e. 2.6.20-1.2944.fc6xen .Several questions: 1. After I have installed the windowsXP, the XP OS of course needs to reboot, but then the WindowsXP is automatically closed. How can I restart it? And I use #virsh start , the domain will be running, but when I

Or how to delegate special PCI devices from domain-0 to dom(u) Hi, I tried to manage some pci devices for dom(u) domains, using the fedora core 5 (xen0/u) and 6-test2 (xen) i686 kernel-xen and kernel-xen-devel rpms: In domain-0 lspci shows the pci device 00:04.01 which should be delegated to dom(u) In dom(u) lspci does not show any information (this seems to be ok) lsmod in dom(u) gives:

Hi all, my name is Hirofumi Tsujimura. We are porting and testing a PV-on-HVM in the IPF. This is a first time to send mail. I probably found the problem when I tested the VNIF. My operation for the test is following. 1. create a domain VTx and attach the VNIF in it. 2. create a domain U. 3. send a packet to the domain VTx from the domain U with ping command. Then, the domain VTx

hi, i´m using fedora core 6 and want to build xen 3.1 from source for the 2.6.20 kernel. how can i build xen with the existing kernel-config from /boot (e.g. config-2.6.20-1.2948.fc6xen) and an installed kernel-devel (source) package? is it good to use this config or should i create a new one? i searched the net and haven´t found any howto to build xen from source with newer kernel versions and

Hi, I have used lmbench to test the performance of Xenolinux (HVM) CPU: Intel (R) Core (TM)2 T7400@2.16GHz Memory size: 1GB NIC: Intel PCIe Gigabit LAN chip HD: Samsung 80GB/7200rpm/8M Dom0: 2.6.19-1.2911.6.5.fc6xen DomU: 2.6.20-1.2944.fc6 The context switch time seems saturated along with increasement of processes? e.g. size of processes 64kB N=number of process t=context switch time when

It is a quite "old" post but the same error at debian etch mv /lib/tls /lib/tls.disable <--- at the vm helped to avoid those messages mfg matthias old mail: Hi. I recently upgraded to fc6. I''m using the fc6 supplied xen packages. However, now all my VM''s are logging entries like: 4gb seg fixup, process sshd (pid 1162), cs:ip 73:008d8cfc printk: 185714 messages

Hello, I am having big problems with Xen virtual network interfaces. First I tried typical bridge support, no luck. The packets sent from dom0 to domU seemed to disappear somewhere. Then, to debug the problem I have set up a simple point-to-point link and still have the same problem. I am using Xen 3.0.4-1 and Linux 2.6.16.x in both dom0 and domU. I have tried kernel 2.6.16.35 and 2.6.16.41. I

I still can't figure out why res_config_mysql module not showing up with many attempt. Anyone have any idea on this? checking for mysql_config... /usr/bin/mysql_config checking for mysql_init in -lmysqlclient... yes configure: creating ./config.status config.status: creating build_tools/menuselect-deps config.status: creating makeopts Sincerely, K -----Original Message----- From: KC

Hello, I am trying to boot a FC6 domU on Xen 3.2 (compiled on a FC6 system). After compiling Xen 3.2 successfully on FC6 and making the ramdisk, I modified the conf.grub as shown below. With this, I was able to boot xen. ------------------------------ --------------------------------------------------------------------------------- # grub.conf generated by anaconda # # Note that you do not have

I can't find anything about Asteirsk-Addon-1.4 MYSQL problem from googling. I thought it would be my error but surely not just tried asterisk 1.2.17 with addon 1.2.5 and it work. Does anyone else having problem make res_config_mysql, cdr_addon_mysql and app_addon_sql_mysql in addon-1.4? Thanks for sharing There are no res_config_mysql and cdr_addon_mysql module after. /configure &&

Hi all! I have installed xen on fc6 with kernel 2.6.18-1.2798.fc6xen with rpm package; i have create 3 guest os (fully virtualization) with virt-manager tool, installed on separated partition: 1 fc6 guest, 1 centos 4.4, 1 windows xp pro; all work pretty fine until this point, i have linked the configuration file of the guests machines to /etc/xen/auto for autostart/autostop, but when

Hallo, Im trying to get the support for smbfs back in FC6_x86_64. I've been told (correct me if I'm wrong) that the newest version of samba has suppoort for smbs I download the samba-3.0.23d from http://us1.samba.org/samba/ftp/Binary_Packages/Fedora/RPMS/i386/core/5/ But these are the files for FC 5 (besides they are for th i386 system) Installing samba-3.0.23d-1.i386.rpm results in an

Hi all, Well I''ve managed to waste a day on this. Posted a similar message earlier today on the fedora list and got no nibbles. I read every article in the archives regarding pxebooting; there is no mention of it in the wiki. I have a box with two kernels, a standard fedora 6 and a xen fedora 6. Both boot fine. I''ve setup another server with dhcp and tftpboot and can now

Hi, I install a guest Fedora inside the host Fedora. When I use the service xend status to check the status of xend. It shows xend is running. However when I use xm create xen1 to start the guest domain xen1, it failed. The corresponding file xen1 is in /etc/xen/xen1. The error msg is as follows: [root@phillis xen]# xm create xen1 Using config file "./xen1". Going to boot Fedora

Hi all, I have a problem during the lauching of my first virtual image. First thing : domain 0 is on fedora core 6 (probably a xen package made in fedora :-S, sorry ...) Second thing : the error is really traditional (i already had it with uml) but there i am blocking. here my config file (for image on logical volume, swap too) root = "/dev/sda1 ro" [root@p-virtvip8 xen]# cat p-virtser9

Hi everyone! I came across a problem when I used xm create to create a domainU on my machine. I installed xen-3.0.4 on my computer, running Fedora 6, kernel version is 2.6.18-1.2798.fc. I want to install a Fedora 6 on xen, so I write the following config file, named fc6.cfg kernel = "/boot/vmlinuz-2.6.16.33-xenU" memory = 128 name = "fedora.fc6" dhcp = "dhcp" disk =

Hello, A bit of history ================ 1) I''ve got a normal 2.6.20 x64 Fedora 6 Linux server running several things 2) I''ve downloaded and installed the XenSource Administrator Console for Windows 3) I''ve added 2.6.20-1.2962.fc6xen kernel, xen and vnc packages on my Linux server 4) I rebooted the Linux server, and started xend as per user guide Configuration

Hi All, I have a freshly installed CentOS 5.3, x86_64 system -- just the Base package selection (via custom packages selection), and nothing else. Immediately after install (no updates), here's what's in the RPM db: [root at dev ~]# rpm -qa | grep -i glib2 glib2-2.12.3-2.fc6 glib2-2.12.3-2.fc6 [root at dev ~]# I have two questions about this: (1) Should this package be

All, I have upgraded by home machine from Fedora Core 5 (FC5) to the recent FC6 and am struggling to build Zaptel-1.2.10 and Asterisk-1.2.13 on the box... which is an Intep P4 2.8GHz HT processor box with 845 chipset, hence the kernel installed is 2.6.18-1.2798.fc6-i686 so we hve this: [root@gate zaptel-1.2.10]# uname -a Linux gate.tubby.org 2.6.18-1.2798.fc6 #1 SMP Mon Oct 16 14:54:20

a clean new FC6 system downloading xen src tar ball I get make[3]: Entering directory `/opt/xen-3.0.4_1-src/tools/blktap/drivers'' gcc -O2 -fomit-frame-pointer -m64 -DNDEBUG -std=gnu99 -Wall -Wstrict- prototypes -Wno-unused-value -Wdeclaration-after-statement - D__XEN_TOOLS__ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -Werror - Wno-unused -fno-strict-aliasing -I