similar to: xenbr0 not coming up.

Somehow I managed to disable the creation of xenbr0 on boot-up of the host system. CentOS 5 with standard CentOS Xen. I changed all Xen VMs to use xenbr0 instead of virbr0 and disabled virtlibd. Works fine. But when I later restarted the machine I found that all networking for guests had gone. On inspection there's no xenbr0 created anymore. I can get it up by stopping network (or eth0)

Hello, I use xen for a few months now and I upgraded to opensuse 10.3 with xen 3.1 (64bit versions) recently. Everything works fine, but there is a problem when I change xend-config.sxp to use my own network script (it''s slightly modified version of network-virtual scripts from http://en.opensuse.org/Xen3_yet_another_Virtual_Network_Concept ) instead of default network-bridge script.

Hey All, I have a cluster setup and exporting gfs storage everything is working ok(as far as I know anyway). But instead of mounting the gfs storage I want the xen guest to be installed on the shared gfs storage. But with my current setup when I install the domU on the gfs storage it changes it to ext3. Is it possible this way or does the domU have to be on an ext file system?

Hi, I have a strange problem with my networking setup. I read all forums around the world where people had similar problems, but couldn''t find a solution. I have an Attansic L1 gigeth chip on my mainboard. This chip works OK in stock Ubuntu Gutsy (development) 2.6.22-9-generic kernel. When I boot into Xen, and after the bridge is created, the network stops working. Some info: - If I

I have a Xen DomU configuration that was made in the days before libvirt and virt-install. In this configuration I have: vif = [ ''mac=00:16:3e:05:06:01, bridge=xenbr0'', ''mac=00:16:3e:05:06:0a, bridge=xenbr1'' ] and then in xend-config.sxp I define (network-script my-network-bridge) where my-network-bridge is in the scripts directory and looks like this:

Just created the first completely new Xen VM with the Virtual Machine Manager after 5.0 became 5.1 and I notice these two differences: - there's now virbr0 instead of xenbr0. Which means I have now xenbr0 and vitbr0 interfaces running. As virbr0 just the new name for xenbr0? If so, can I just change that name in the older configuration files, so that all use the same interface name? -

Hello, I am installing xen-3.0.31 on debian-etch-r7 version (apt-get install xen-linux-system-2.6.18-6-xen-686 screen ssh debootstrap python python-twisted iproute bridge-utils libcurl3-dev libssl0.9.7). My eth0 is configured to get IP via dhcp (interfaces file attached). I am able to boot into dom0, but starting xenbr0 causes loss of IP connectivity. Here is what I do. Initially, my

How to check which all network card are part of xenbr0 and what way i can add additional nic on the fly in the xenbr0 _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi all, Does anyone know what the correct steps are to add a XEN bridge, let''s say xenbr0 to Debian Squeeze? I have added the following to /etc/network/interfaces # XEN Bridge auto xenbr0 iface xenbr0 inet manual bridge ports eth0 bridge_stp off bridge_fd 0 And then rebooted the server but brctl show still shows eth0 as bridge: newusaxen:~# brctl

Hi, I''m trying to set up networking on a new machine. I''m not getting any networking from the domU''s I notice that I have two bridges being created: xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:3024 errors:0 dropped:0

Hi guys, i use xen3.2. how can i manually create the xenbr0 ? which parameters have i to choose for brctl ? thanks, -- Viele Grüße Dominique Holger Schramm | Linux Administrator http://schwarz-weiss.cc/ | Life between PuTTy and reality http://ihr-linuxadmin.eu/ | Commercial Admin Service _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

I got this message when i''m trying to create the VM. Error: Device 0 (vif) could not be connected. Could not find bridge device xenbr0 Is there a way to change de interface from eth0 to eth3? thanks -- *-----* *Juan Pablo Lopez Bergero* *Cell: 15-3957-3455* * * _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Package: xen-utils-common Version: 4.3.0-3 Severity: normal Dear Maintainer, I've just set up a fresh Jessie system using the installer dated 2014-03-05, then installed and enabled Xen 4.3. I've done this quite a few times before using Wheezy and 4.1. I set up xenbr0, then created a test domU using xen-create-image, which completed without issue. However I was unable to start the new

I'm seeing an issue with xend not running a custom network script automatically, but works when I run it manually. In /etc/xen/xend-config.sxp I've changed: (network-script network-bridge) TO: (network-script network-custom) Here is /etc/xen/scripts/network-custom: # !/bin/bash # network-custom script=/etc/xen/scripts/network-bridge case $1 in start) $script start vifnum=0

Hi, Can any one clarify me about xenbr0 please?? I start network-bridge manually after I start xend. /etc/xen/scripts/network-bridge start. everything goes fine and my peth0 is up. I just wanted to clarify that is the bridge xenbr0 created automatically here?? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

Hi, I've been using CentOS & Xen on a server that has 2 VM's configured. The default configuration includes one physical iface that is propagated (by a default bridge) to the VM's. Since I wanted to configure additional physical iface, define a new bridge and propagate it to the viface-s of the VM's, i configured the bridge/phys. iface and brought it up (here are

Hi, If one sets xend to use network-bridge and there are no bridges already present then it seems that xend will clone eth0 to peth0, create xenbr0 and add peth0 and vif0.0 as ports on that bridge. If on the other hand xenbr0 is created in /etc/network/interfaces then xend will not do any of that peth0 stuff, nor will it add vif0.0 to xenbr0, yet (barring some changes in iptables rules) things

Hello, Does anyone could tell me how can I use pciback under Ubuntu ? I''ve got a telephony card for Asterisk and I find this document : http://www.crc.id.au/fedora-core-6-xen-and-asterisk/ What happens seems that pciback module is unavailable under Ubuntu or compiled into the kernel ? Any tips are welcome Regards _______________________________________________ Xen-users mailing

Hi, I have taken the long and winding road and indeed it lead me to your door. I need your help, please. My Xen includes 2 guests. Xen itself (10.2.0.52) gets free access to the outside world and to its guests. Both guests however (10.2.0.54/10.2.0.55) see each other but stay under house arrest! Not a single ping manages to go past the bridge (xenbr0) and get an answer from the default gateway

So Working on CEntOS 5 I am trying to sett up Xen with 2 bridges, one that connects dom0 and most of the domU to the physical card and the out to the network. Got that figured out no problem, now i want to have a second bridge that runs a local network for all the doms that doesn''t connect to the network. With code I have found used in multiple places I can easily get 2 bridges, and