similar to: supermicro motherboard and hvm guest

I have a server with Super Micro X7DB3 motherboard and Adaptech AIC-9410 controller (http://www.supermicro.com/products/motherboard/Xeon1333/5000P/X7DB3.cfm). The hard disk is single SeaGate SAS disk (300Gb). I'd like to install CentOS 7 on the server, but unfortunately, the CentOS installer can't find any hard disk. I think the problem maybe caused by the disk controller. Can you please

I need to do a new CentOS net install on a new server having the Supermicro X7DVL-3 motherboard: http://www.supermicro.com/products/motherboard/xeon1333/5000V/X7DVL-3.cfm Based on that info I assume the board having a "8x SAS Ports via LSI 1068E Controller". We received the server with 3 drives + 1 spare as hw RAID-5 preinstalled. During bootup I see that the drives are initialised

There was recently a thread on this mailing list regarding SuperMicro hardware and CentOS. Here is one of the posts: http://lists.caosity.org/pipermail/centos/2005-January/001503.html My question is about the P8SCi motherboard, a fairly new SuperMicro model. The vendor's specifications page mentions Linux but I would rather hear from end users and their experiences. Here is a URL:

I have a weird situation with a new installation of CentOS 5.4 x64, on a SuperMicro X7SBI server. The server has a <a href=" http://www.supermicro.com/products/motherboard/Xeon3000/3210/X7SBi.cfm" target="_new">SuperMicro X7SBi motherboard</a>, board ATI ES1000 and Core2Quad Q9505 CPU. The kernel is When I login to the console, using a "17 CRT monitor

hi, i have new supermicro server (centos5, 2.6.30.9/2.6.27.34/2.6.18-distro kernels, wanpipe 3.5.6) card is: 1 . AFT-A101-SH : SLOT=4 : BUS=8 : IRQ=11 : CPU=A : PORT=1 : HWEC=32 : V=36 and i have this in log irq 17: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.30.9rh #1 Call Trace: [<c0465b07>] __report_bad_irq+0x27/0x90

Hi all, I''m having difficulty getting VT-d to work correctly with a new Supermicro MBD-X10SAE-O in QubesOS <http://qubes-os.org/trac>, and I''m hoping someone here might be able to help me (or at least shed some light on my situation). A Qubes developer suggested I contact this list. Here''s my HCL post from the qubes-users group

Has anyone used this board as an Asterisk server? http://www.supermicro.com/products/motherboard/ATOM/ICH9/X7SPE.cfm?typ=H&IPMI=Y I'm mostly interested about the possible compatibility issues this board may have with the AEX800 card.

Guys. Anybody using supermicro mobos and chassis with TDM cards? I would like to know which models are you using (mobos and chassis and also CPUs) and how many TDM cards have you been able to put in without having IRQ issues like in other cases. Ive read supermicro servers play nice with asterisk but it is always good to ask I guess. Thx! AK

Hi all, I''m putting together a OpenSolaris ZFS-based system and need help picking hardware. I''m thinking about using this 26-disk case: [FYI: 2-disk RAID1 for the OS & 4*(4+2) RAIDZ2 for SAN] http://rackmountpro.com/productpage.php?prodid=2418 Regarding the mobo, cpus, and memory - I searched goggle and the ZFS site and all I came up with so far is that, for a

Hi all, I''m putting together a OpenSolaris ZFS-based system and need help picking hardware. I''m thinking about using this 26-disk case: [FYI: 2-disk RAID1 for the OS & 4*(4+2) RAIDZ2 for SAN] http://rackmountpro.com/productpage.php?prodid=2418 Regarding the mobo, cpus, and memory - I searched goggle and the ZFS site and all I came up with so far is that, for a

Sorry for the long post but I know trying to decide on hardware often want to see details about what people are using. I have the following AS-2022G-URF machine running OpenGaryIndiana[1] that I am starting to use. I successfully transferred a deduped zpool with 1.x TB of files and 60 or so zfs filesystems using mbuffer from an old 134 system with 6 drives - it ran at about 50MB/s or

So, having returned from a month's vacation, I'm back to work on attempting to build a set of small form factor CentOS compatible computers. I've really tried to do my homework, but this doesn't appear (at first glance) to be at all easy. It's not made easier by the fact that I have to get it right the first time (and I haven't built a PC in a decade); the time and money

Hello all..... I would like to know if anyone here has had good experience with this Supermicro motherboard.....http://supermicro.com/products/motherboard/P4/E7221/P8SCT.cfm I am thinking about using it in an entry level mail and file server with a 3ware card and 200 GB SATA drives. Cost is a factor here otherwise I would go for an Opteron board instead. JC

Hello folks, I'm having a difficult time trying to figure out why the CPU cooling fans run at full speed on my Supermicro X8DAL-3 motherboard. There doesn't seem to be any variable speed (the fans are PWM compatible) ... they either idle at almost nothing, or suddenly burst into a high-pitched scream that gets my ears bleeding after a few seconds. Once they jump to warp-10, they

Anyone using boards with this chipset? I've gotten some dual core single cpu boxes along with the physical dual cpu boxes I just received and they're using the Serverworks HT1000 (Broadcom 5785) chipset. My CentOS 4.2 DVD doesn't want to recognize the chipset so I can't see any of the SATA drives in the integrated SATA ports. Drives on 3Ware cards work as expected, but I

hi. I am having some problems installing CentOS 5.2 x86_64 onto a Supermicro 6015V-T with Intel 5000V chipset and ESB2 controller using SATA drives. Currently I am running CentOS 4.7 i386 and it sees both drives but when I boot into the CentOS 5 install CD it fails to see the drives. Does anybody have any tips for getting the drives visible? Kind regards, Dougal

Greetings. HP claims RHEL 4 supports their servers with the Intel 3000 and 5000 chipsets. Has anyone had any trouble/success building machines that use this? For example, CentOS 4.4 on http://www.supermicro.com/products/system/1U/5015/SYS-5015M-T+.cfm Thx. Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

These are new boxes. http://www.supermicro.com/products/system/1U/5015/SYS-5015B-MT.cfm core 2 Q6600 CPU 8Gb 667 RAM Boxes were memtested from Fri-Mon okay. 6.3-RELEASE (amd64) installs fine. Build cycle okay. Running (no load) for a week or so. However, when I try to configure gmirror they hang on boot. After some fiddling it appears issuing #kldload geom_mirror hangs the boxes very hard.

I'm wondering if anyone has had any good/bad/indifferent experiences with Supermicro P4SGE P4 FCPGA motherboards and Digium cards? I'm looking to use this MB in an E100P E1 card solution, and I haven't had the ability to test with that configuration before I ship a system overseas (since I don't have an E1 to plug into it, it's hard for me to test, and I don't have

Hello, Digium support kindly proposed to ship a TE120P card to help resolve the issue. I plugged in the card, and introduced the loopback plug. I cleared the red alarm for a while and then i started seeing alarm switching from Yel/Recovering to Blue/Rec with a lot of IRQ Misses. I call Digium that assisted us, and we noticed IRQ sharing with the VGA adapter and the Ethernet port. I changed