similar to: Problem with dom0_mem and tmpfs on SLES10

I start sles10 use kernel-xen, but there''re not NIC eh0, and only have xenbr0, but the xenbr0 cannot get IP address via DHCP, (in normal sles10, the eth0 can get IP via DHCP), how can I connect to Internet in kerne-xen via xenbr0? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I''ve just set up a small lustre installation on mixed SLES10 32-bit and SLES10 SP1 64-bit. 32-bit would give ksym errors upon installation of modules rpm, while 64-bit SP1 it was only warnings. I did a little research on the ksym package and it seemed to me it was only needed if you were trying to install a module compiled for a different kernel version. Since CFS is providing a

Hi, We have configured several xen guest OSes on a server running SLES10. The physical server is a Sun 4200 with 3 NICs installed, configured, and working. Each of the xen guest OSes have three virtual nics, configured for RAC, Interconnect, and public IPs as follows; eth0 - public (routable and registered in DNS) eth1 - private (not routable, uses a seperate network subnet for

Hi, I thought about changing the RPM package the guys of Redhat created, because I wanted an Init Script for SLES10 built-in. I started documenting the steps I took. Maybe it''s useful for someone else, although in German.. but the basic steps should be useable. My little Installating puppet Howto: http://wiki.njh.eu/Konfigurationsmanagement#Installation_3 The Init Script for SLES10:

I am having issues with guest OSes running on SLES10 (Sun 4200) hosts. Periodically, the guest OS system drops off the network. From the general network it is not pingable, consequently, ssh fails. If however, I log into the SLES10 server that is hosting the guest OS and ssh to the guest OS, then it becomes immediately pingable and accessible to the rest of the network. Almost like the

Hi,All, how can I install suse sles10 as para Dom-U on RHEL5, I have update xen to 3.2. In python-virtinst readme,there is only support Fedora/Red Hat Enterprise Linux. README of python-virtinst: virtinst is a module to help in starting installations of Fedora/Red Hat Enterprise Linux related distributions inside of virtual machines. It supports both paravirt guests (for which only FC and

Hi, I''m trying to build non sles10 domU under sles10 dom0. I''ve downloaded centos and debian images from www.jailtime.org fixed the config file and try to start domU. After creating domU from images I get Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) I''m running without problems two sles10 domU machines. After using google allot :-)

After recent Samba updates to one of our SLES10 SP1 systems users who open and save Excel 2007 files end up with the Read-only attribute set on the file. I had this same problem with the 3.0.28 update and the only solution I found was to roll back to the previous version. My understanding was that 3.0.32 should fix this. Did I miss something? Are there smb.conf changes that need to be made

Hi, in SLES10 YaST insists in "xorg-x11" being installed, even if the display is redirected to a remote host. So I thought: Can''t I do it simpler? I''m still new to XEN, but I started like this: mount the SLES10 DVD to /mnt, and use this configuration file: ----- disk = [ ''phy:/dev/system/as1,hda,w'', ''phy:/dev/hda,hdb,r'' ] memory

Hi, After some hard trying to use lustre on our debian servers with an up2date kernel I decided to buy sles10 to make everything more comftable: I installed (rpm -i) the new kernelbinaries from 1.6.2/sles10-i686 to a sles10 test box (AMD64). When i try to install the modules form 1.6.2/sles10-i686 it says : sles2:/usr/src/lustre # rpm -i

---------- Forwarded Message ---------- Subject: Re: [Xen-users] Problems running Debian as Guest System on SLES10 Dom0 Date: Tuesday 29 January 2008 From: jim burns <jim_burn@bellsouth.net> To: deshantm@gmail.com On Tuesday 29 January 2008 11:21:09 am Todd Deshane wrote: > Why doesn''t sles 10 have pygrub? pygrub comes with Xen. Old problem that was covered in this list a

We are trying to install a 32-bit SLES9-SP4 paravirtual machine on a 64-bit SLES10-SP1 Dom0 host from scratch. We have two problems: 1. The YaST2 VM creation tool fails to create a vm if a network card is selected. 2. The initial vm boots from the SLES9-SP4 iso file, but then complains it can''t find the installation source. Here is the /etc/xen/vm/file (after manually editing for a

On Jan 28, 2008 10:54 -0600, Eric Sandeen wrote: > Theodore Tso wrote: > > On Mon, Jan 28, 2008 at 04:26:53PM +0100, Matthias Koenig wrote: > >>> Patch6: e2fsprogs-mdraid.patch > >>> > >>> This apparently adds a new environment variable, > >>> BLKID_SKIP_CHECK_MDRAID, which forces blkid to not detect mdraid > >>>

Hi Mark, I had this same issue trying to install SLES9SP4 PV on to SLES10SP1 host. You cannot do this. You can however install a SLES9SP4 FV guest. If you want a PV SLES9SP4, you will need SLES10SP2. -A _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I'm trying to mount a ocfs2 volume (created on sles11) on my sles10sp2 server. I created the volume with these options: "mkfs.ocfs2 -C 128k -L CLUFS -M cluster -N 16 /dev/sdc". (dev/sdc is an iscsi device). It works to mount the volume with "mount.ocfs2 /dev/sdc /ocfs2" on my boxes (with o2cb configured for both nodes). When creating files on the ocfs2 volume I cant see

Hi, I have a problem with augeas, puppet and Suse 10 SP2. Augeas works when I use the augtool to edit files. But I would like to use it in combination with puppet. My class looks something like this: augeas {"sysctl.conf": provider => "augeas", context => "/files/etc/sysctl.conf", changes => [ "set

Here is the original set of fixes, split out into 14 individual ones. In addition to splitting them out, I also changed the ones that were HAS_* to NO_* as requested. The last two patches are needed to build on openSUSE 10.3 which is based on 2.6.22. I used it as a sanity check and found those failures. -Jeff -- Jeff Mahoney SUSE Labs

Hello, my apologies for not being sure whom to tell this problem, but it is very strange. Let me tell the story: I''m using XEN (3.0.2) with SLES10 (x86_64, SunFire X4100). On one machine I have three virtual machines ("DomU") that are very identically configured (SLES10 x86_64 also). There is also a SLES9 (i386) acting as a multi-homed NFS server. I can mount and access a

Hi, we are using a SLES10 Patchlevel 3 with 12 Nodes hosting tomcat application servers. The cluster was running some time (about 200 days) without problems. Recently we needed to shutdown the cluster for maintenance and experianced very long times for the umount of the filesystem. It took something like 45 minutes each node and filesystem (12 x 45 minutes shutdown time). As a result the planned

I''ve just uneventfully installed SLES10 as an HVM DomU (after finding out, the hard way, that OpenSUSE 10.3 won''t install on Intel VT). This almost went without a hitch, but I''ve been banging my head against a brick wall for a few hours trying to get VNC working. I can get a remote desktop, but a few seconds after I log in to the remote desktop, the screen goes