similar to: Xen network configuration

Hi, We have configured several xen guest OSes on a server running SLES10. The physical server is a Sun 4200 with 3 NICs installed, configured, and working. Each of the xen guest OSes have three virtual nics, configured for RAC, Interconnect, and public IPs as follows; eth0 - public (routable and registered in DNS) eth1 - private (not routable, uses a seperate network subnet for

hi, I have to configure Xen server and DomU''s which should be able to talk to different vlans - depending on services put on DomU''s. I would like to enslave 2 NICs via bond interface. Both NICs are on trunk ports which are configured in the same way, the same native vlan. I don''t know, if I have to add vlans tagging to eth* interfaces then enslave tagged eth*

FYI this topic has been covered on the Zebra and Quagga lists - hardware processors, memory, NICs, etc - software OS (Linux, *BSD), drivers, etc I''ve been running a couple of Linux routers for about 2 years now, I''m using them as core routers so I bought a couple of rackmount "server" boxes with redundant PSUs and h/w RAID (1) for hotswap disks. I''m using

Hi, I''m trying to build non sles10 domU under sles10 dom0. I''ve downloaded centos and debian images from www.jailtime.org fixed the config file and try to start domU. After creating domU from images I get Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) I''m running without problems two sles10 domU machines. After using google allot :-)

Hi, After some hard trying to use lustre on our debian servers with an up2date kernel I decided to buy sles10 to make everything more comftable: I installed (rpm -i) the new kernelbinaries from 1.6.2/sles10-i686 to a sles10 test box (AMD64). When i try to install the modules form 1.6.2/sles10-i686 it says : sles2:/usr/src/lustre # rpm -i

Hello all, I have been running xen for a while now with two interfaces: dummy0 for host only communication, and eth0 for the outside network. my script looks like this: (/etc/xen/scripts/network-bridge-more) ------------------------------------------------------------------ #! /bin/sh dir=$(dirname "$0") "$dir/network-bridge" "$@" vifnum=0 netdev=dummy0

Hi, I have started the xen kernel with parameter dom0_mem=300M. xm info | grep total total_memory : 2045 Name ID Mem VCPUs State Time(s) Domain-0 0 300 2 r----- 292.1 FTP 822 1 56.7 LDAP 1 822 1 r----- 541.3 NFS1 822 1 14.8 NFS2 822 1 1.4 For the

took a couple months off due to road blocks, hoping a fresh look would allow me to use my server as desired. I have three ports, eth0-2 over two nics. I want to bond them, and then use a bridge to connect to virtual machines on the virtual host computer. Never having done this, I am confused on some parts. Here is where I am at now and any pointers helpful. Single server, centos 6.x My issue

Dear Gurus, We're having bizarre problems/behaviour. Admittedly we have an unusual set-up: - users on linux desktops (RedHat/KDE) mounting files over SMB using samba-2.2.5-10 -client and -common rpms. - files are on a SAN, clustered behind 2 netware servers (6.5), wihch run the cifs.nlm (netware guy has gone home - can't tell you the version just now) Files are spontaneously

My head hurts from trying to figure this out for the past several hours . . . I want to determine what provider to use based on a fact (thanks for the suse version fact btw) but I ain''t gettin it: What''s wrong? Am I going down the completely wrong path? Is there a better way? # suse-yum.pp case $suse_repo_name { #sled10-i586: {Package{ provider => rug}} sled10-i586:

I''m getting the following error/warning at some point in my config script, and I''m not sure which class it is referring to. htb: class 10007 isn''t work conserving ?! I [think I] understand that htb is a non-work-conserving qdisc, and I [think I] have configured things so that every htb qdisc I instantiate limits the bandwidth, so I don''t understand why this

Hi, I just installed SLES10 and started using xen. My platform does not support HVM, therefore I am using the paravirtualized technology in XEN. What I want is to have a guest RHEL4 machine on my current SLES10 host. Is it possible ? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I start sles10 use kernel-xen, but there''re not NIC eh0, and only have xenbr0, but the xenbr0 cannot get IP address via DHCP, (in normal sles10, the eth0 can get IP via DHCP), how can I connect to Internet in kerne-xen via xenbr0? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Dear all I have a dataset that looks like: fr.wt site 1 4400 glen 2 235 glen 3 225 glen ' ' ' ' ' ' ' ' ' 82 550 glen 83 550 kom 84 550 kom ' ' ' ' ' ' ' ' ' 191 820 kom 192 2000 soet ' ' ' ' ' ' I need to do a series of histograms for each of the codes, levels or factors in

I''m using bonding in active-fallback mode to guarantee maximum availability on some critical servers. The mii mode is active so I can detect things like dead card and/or unplugged cable even on the inactive slave. But how do I check that the inactive slave is properly configured/connected to the switch/vlan? I ask this question because it has just bitten me in a part I''ll keep

Hi all, I have installed SLES10 as a guest on a para-virtualized XEN 3.0.4. the host system is SLES10. Now I want to add a cdrom to the guest machine, when I do that by using "xm block-attach" it adds a new hard disk to the guest not a cdrom. Also I need to make the guest boot from cd. Thanks _______________________________________________ Xen-users mailing list

Does anyone know if avaya voip product is running linux under the hood? Thanks, /glen -- Glen Ford gford@idiom.com

Hi all, Read many posts on the subject. Using 802.3ad. Few problems; Cannot ping some hosts on the network, they are all up. Cannot resolve via DNS which is one of the hosts that I cannot ping, internal nor external DNS hosts. Unplugging the NICS and plugging them back in will then not allow pining if the default d=gateway. When cold booting it somewhat works, some hosts are pingable while

I''ve just set up a small lustre installation on mixed SLES10 32-bit and SLES10 SP1 64-bit. 32-bit would give ksym errors upon installation of modules rpm, while 64-bit SP1 it was only warnings. I did a little research on the ksym package and it seemed to me it was only needed if you were trying to install a module compiled for a different kernel version. Since CFS is providing a

Hi, I thought about changing the RPM package the guys of Redhat created, because I wanted an Init Script for SLES10 built-in. I started documenting the steps I took. Maybe it''s useful for someone else, although in German.. but the basic steps should be useable. My little Installating puppet Howto: http://wiki.njh.eu/Konfigurationsmanagement#Installation_3 The Init Script for SLES10: