similar to: Network setup on Redhat based systems

Well where do I start...I have a domU (ubuntu) booting and appears well but I don''t have an eth0 listed at all, dom) looks good. DomU: eth0 Link encap:Ethernet HWaddr 00:06:5B:15:C5:0B inet addr:10.99.99.5 Bcast:10.99.99.7 Mask:255.255.255.248 inet6 addr: fe80::206:5bff:fe15:c50b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

CentOS 5.5 Xen "standard" Xen Installation. I have two nics. I just put the second one to DHCP and modified the ifcfg-et01 and so far I am holding, but I am not confident. Prior they were sequential IP Addrs on same subnet. arpwatch has indicated flip flips. I can find no rhyme or reason to predict them. I know I missed I must have missed a step somewhere. I want to keep the

Hi I don''t quite understand the new xen networking. We use network-bridge! Everything works fine except that an iptables firewall on dom0 blocks all my domU. In my firewall settings i use eth0. I figured out that eth0 is the bridge but where is the interface for dom0? I want my firewall setting to only apply to dom0 interface! Since there is not anything like vif0.0 i don''t know

Hi, I have 3 xen box with 2-3 VM on each. Each server has 2 nic (1 for external and 1 for internal network). All VMs are webserver and they mount a nfs filesystem. I''ve noticed that on each dom0 there are many dropped packets. Server config is: 1- DELL (2xQuad Xeon E5320 @1.86Ghz - 8Gb Ram - Perc5 - Kernel 2.6.18-6 (debian etch)) 2- DELL (2xDual Xeon 5110 @1.60Ghz - 4Gb Ram - Perc5 -

Hi I installed xen by following this link: http://www.howtoforge.com/virtualization-with-xen-on-debian-lenny-amd64 Dom0(debian) has two IP :174.x.x.79 , 67.x.x.32 gateway is 174.x.x.65 DomU(win2003) IP is :67.x.x.38 The problem is : 1.weird network issue in win2003(can not access the internet in win2003): A:weird ping time for 127.0.0.1 B:weird ping time for its own ip 67.x.x.38 C:timeout

Hi all, Has anyone seen this before? I''m running a CentOS 5.3 with xen 3.0 and the server has been running fine for a long time. In fact, it was up for 186 days before I had to reboot after the "network died", and I couldn''t fix it. The server has multiple domU''s on it, which all still works when the host node (dom0)''s network dies with these

Hi I'm very new with Xen (/Debian) I have 2 VMs running Windows: "Arch" and "Sql" -- static IPs VM Arch: is ok, accessible thru VNC, Remote Desktop, see the network, etc VM Sql : - just accessible thru VNC             - once I log in, I don't see the network             - pings don't reach peer             - appear 4 network ports on Windows the server has 4

I''ve setup Xen 3.0.2-2 (binary install) on Ubuntu 6.06, got my domUs up and running, got them connected to the Internet but I can''t even ping to any of these VMs. Now I''m not linux/xen genious but could the problem be that xen-br0 doesn''t have an IPv4 address? (it''s got an IPv6 address) Since I don''t use IPv6 on my network this seems a

I have a server running Centos 5.2 as a Xen host. A problem that's shown up recently is that at boot, the dom0 interface eth0 doesn't come up properly, with the result that the host is only accessible via remote console. If I execute 'service network restart', eth0 comes up normally, with an IP address and the correct routing. Three guests have been created via virt-manager

Hi all, I have a very strange situation, which I can''t explain. On a Core 2Quad server with 8GB RAM, we have 10 xen domU''s, as follows: vps.animalsaregreat.info login: root@zaxen01:[~]$ xm list Name ID Mem(MiB) VCPUs State Time(s) Domain-0 0 512 4 r----- 232.2 actionco.vm

Hello everyone. I just installed Xen 3.0.3 in a debian etch box. Linux server1.example.com 2.6.18-6-xen-686 #1 This server1 has two real nic (eth0 with real MAC 00:13:72:57:7B:AE and eth1 with real MAC00:13:72:57:7B:AF). I made a network-bridge custom like this: ----------------------------------------------------------------------- #!/bin/bash dir=$(dirname "$0")

Hi All, We have a single Centos 5.11 server running a xen hypervisor that went down hard after an extended power outage this weekend. I'm mostly familiar for KVM as that is the majority of what our guests run under and have tried getting up to speed on xen bridging to no avail. The problem is that after the xen server spun back up, the previously defined xen bridges were lost. I've

Hi, We''re trying to run Xen on a Debian "Etch" base system (kernel 2.6.18-6-xen-amd64), but have come across a strange networking error whenever bridging (vif-bridge/network-bridge) is in operation. The symptom is that the dom0 base system loses all network connectivity to the outside world while the two guest instances function perfectly well. As far as we can tell, we

Has anyone ran into this issue before? 2 physical nics: eth0 hooked up to 10.175.8.0/21 eth1 hooked up to 10.150.8.0/24 Ifconfig -a looks like this: [root@mgixen1 ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:19:B9:F2:1B:C3 inet addr:10.175.8.158 Bcast:10.175.15.255 Mask:255.255.248.0 inet6 addr: fe80::219:b9ff:fef2:1bc3/64 Scope:Link UP

Hello, A bit of history ================ 1) I''ve got a normal 2.6.20 x64 Fedora 6 Linux server running several things 2) I''ve downloaded and installed the XenSource Administrator Console for Windows 3) I''ve added 2.6.20-1.2962.fc6xen kernel, xen and vnc packages on my Linux server 4) I rebooted the Linux server, and started xend as per user guide Configuration

Dear Xen-Users, I use Xen 3.1.0_15042 on my OpenSuSE-10.3-computer. Without starting the xen-kernel I can connect my second computer via my native computer to the internet. After starting the xen-kernel the xen-bridge came automatically up. How can I configure the xen-bridge or the xen-devices? I get routing problems: Feb 20 18:31:36 intel6550 kernel: martian source 217.237.149.142 from

Hello! I have two problems. One is, that I cannot ping a DomU from Dom0 (or any other host in my local network) and the second one is, that I cannot ping the same site (eg. www.suse.com) from two DomU''s at the same time. I have a fresh installation of openSuse 11.0 with Kernel 2.6.25.20-0.1-xen and my box has two physical ethernet cards. As far as I have investigated, eth0 is the one

I''ve looked everywhere for the error message I''ve posted in the title, doesn''t seem like anyone else has it (lots of missing hotplugs scripts). We''re using network-nat. ifconfig -a outputs this: eth0 Link encap:Ethernet HWaddr 00:19:99:a8:f4:5c inet addr:X.X.X.X Bcast:X.X.X.X Mask:255.255.255.255 inet6 addr: X::X:X:X:X/64 Scope:Link

I just did a fresh install of centos 5.0 from cd, followed by yum update which installed 399 packages. No failures or errors that I can see. I have three nics in the box, but am only setting up one at the moment. The box can ping others in my network, but if I try ssh, telnet, ftp, etc I get this: [root at cm network-scripts]# ftp watchdog ftp: connect: No route to host ftp> [root at cm

Hi all, my dom0 is centos5.2 and domU paravirtualized is centos5.1 I can play sound on dom0 but not in domU (name: gasphar), moreover I use wifi as my inet connection and on installing domU cento5.1, I used virt-manager. I know that libvirtd made virbr0 and when changing to xenbr0, I cannot connect to internet but ssh to dom0 is fine! so how do I enable sound device on domU and changing to