Displaying 20 results from an estimated 10000 matches similar to: "How can I connect to Internet in sles10-xen"
2006 Aug 14
1
Configure / enable xenbr1 on SLES10 base system
Hi,
We have configured several xen guest OSes on a server running SLES10.
The physical server is a Sun 4200 with 3 NICs installed, configured, and
working.
Each of the xen guest OSes have three virtual nics, configured for RAC,
Interconnect, and public IPs as follows;
eth0 - public (routable and registered in DNS)
eth1 - private (not routable, uses a seperate network subnet for
2007 Nov 20
2
strange network problem
Hi,
I some problem setup networking on a opensuse 10.3, x86_64, xen 3.1.0.
I have four suse 10.3, x86_64 PVM hosts running on it, they are connected
via a bridge to get network.
I can connect from external hosts, to the virtual machine, and from the
virtual machines to the internet, no problem. But I cannot reach the dom0
from within the domU''s or vice versa. Also the domU''s
2007 Aug 31
2
sles10: installing module-binaries: "error: Failed dependencies: ksym(panic) .."
Hi, After some hard trying to use lustre on our debian servers with an up2date kernel I decided to buy sles10 to make everything more comftable: I installed (rpm -i) the new kernelbinaries from 1.6.2/sles10-i686 to a sles10 test box (AMD64). When i try to install the modules form 1.6.2/sles10-i686 it says : sles2:/usr/src/lustre # rpm -i
2007 Apr 12
3
domu under sles10
Hi,
I''m trying to build non sles10 domU under sles10 dom0. I''ve downloaded
centos and debian images from www.jailtime.org fixed the config file
and try to start domU.
After creating domU from images I get
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
I''m running without problems two sles10 domU machines.
After using google allot :-)
2006 Aug 23
0
SLES10 guest OSes drop off network.
I am having issues with guest OSes running on SLES10 (Sun 4200) hosts.
Periodically, the guest OS system drops off the network. From the
general network it is not pingable, consequently, ssh fails. If however,
I log into the SLES10 server that is hosting the guest OS and ssh to the
guest OS, then it becomes immediately pingable and accessible to the
rest of the network. Almost like the
2007 Apr 03
1
rpm package for sles10
Hi,
I thought about changing the RPM package the guys of Redhat created,
because I wanted an Init Script for SLES10 built-in. I started documenting
the steps I took. Maybe it''s useful for someone else, although in German..
but the basic steps should be useable.
My little Installating puppet Howto:
http://wiki.njh.eu/Konfigurationsmanagement#Installation_3
The Init Script for SLES10:
2008 Mar 30
2
install suse sles10 as para Dom-U on RHEL5
Hi,All,
how can I install suse sles10 as para Dom-U on RHEL5,
I have update xen to 3.2.
In python-virtinst readme,there is only support Fedora/Red
Hat Enterprise Linux.
README of python-virtinst:
virtinst is a module to help in starting installations of Fedora/Red
Hat Enterprise Linux related distributions inside of virtual
machines. It supports both paravirt guests (for which only FC and
2008 Jan 27
9
Problem setting up VNC on SLES10 HVM DomU
I''ve just uneventfully installed SLES10 as an HVM DomU (after finding
out, the hard way, that OpenSUSE 10.3 won''t install on Intel VT).
This almost went without a hitch, but I''ve been banging my head against
a brick wall for a few hours trying to get VNC working. I can get a
remote desktop, but a few seconds after I log in to the remote desktop,
the screen goes
2006 Oct 24
0
Q: HOWTO manually boot SLES10 installation
Hi,
in SLES10 YaST insists in "xorg-x11" being installed, even if the display is
redirected to a remote host. So I thought: Can''t I do it simpler?
I''m still new to XEN, but I started like this:
mount the SLES10 DVD to /mnt, and use this configuration file:
-----
disk = [ ''phy:/dev/system/as1,hda,w'', ''phy:/dev/hda,hdb,r'' ]
memory
2007 Oct 12
1
Update - ksym errors when installing modules in SLES10
I''ve just set up a small lustre installation on mixed SLES10 32-bit and
SLES10 SP1 64-bit. 32-bit would give ksym errors upon installation of
modules rpm, while 64-bit SP1 it was only warnings. I did a little
research on the ksym package and it seemed to me it was only needed if
you were trying to install a module compiled for a different kernel
version. Since CFS is providing a
2011 Jul 06
2
Slow umounts on SLES10 patchlevel 3 ocfs2
Hi,
we are using a SLES10 Patchlevel 3 with 12 Nodes hosting tomcat application servers.
The cluster was running some time (about 200 days) without problems.
Recently we needed to shutdown the cluster for maintenance and experianced very long times for the umount of the filesystem. It took something like 45 minutes each node and filesystem (12 x 45 minutes shutdown time).
As a result the planned
2006 Nov 08
4
bridge with IP address, "received packet with own address as source address"
Hi,
I''ve set up identical (what I think) machines using SLES 10 x86_64, but a new one
of those is saying frequently in /var/log/messages:
kernel: bond0: received packet with own address as source address
A short summary of ifconfig looks like this:
bond0 Link encap:Ethernet HWaddr 00:14:4F:2A:12:9C
inet addr:132.199.176.78 Bcast:132.199.255.255 Mask:255.255.0.0
eth0
2007 Apr 26
6
Struggling to define multiple yum/rug repositories
My head hurts from trying to figure this out for the past several hours . . .
I want to determine what provider to use based on a fact (thanks for
the suse version fact btw) but I ain''t gettin it:
What''s wrong? Am I going down the completely wrong path? Is there a better way?
# suse-yum.pp
case $suse_repo_name {
#sled10-i586: {Package{ provider => rug}}
sled10-i586:
2007 Nov 22
5
Different networks between Dom0 and Guest?
Hi,
I''m running SLES10 SP1 with xen 3.0.4 and windows 2003 server as guest.
Is it possible to assign ips from different networks to Dom0 and Guest,
e. g. 172.27.10.1/24 for Dom0 and 172.27.15.1/24 for Guest?
I tried it, but I can''t reach the Guest.
If it''s possible, what should I have to configure?
Thanks!
Nicole
_______________________________________________
2008 Nov 26
1
SLES10 SP1 3.0.32 - Excel files set read only
After recent Samba updates to one of our SLES10 SP1 systems users who open
and save Excel 2007 files end up with the Read-only attribute set on the
file. I had this same problem with the 3.0.28 update and the only solution
I found was to roll back to the previous version. My understanding was
that 3.0.32 should fix this. Did I miss something? Are there smb.conf
changes that need to be made
2009 Dec 14
4
Provider Augeas not functional on Sles10?
Hi,
I have a problem with augeas, puppet and Suse 10 SP2.
Augeas works when I use the augtool to edit files. But I would like to
use it in combination with puppet. My class looks something like this:
augeas {"sysctl.conf":
provider => "augeas",
context => "/files/etc/sysctl.conf",
changes => [
"set
2007 Feb 01
1
Problem with dom0_mem and tmpfs on SLES10
Hello friends!
In this week, i had a problem with Xen version 3.0.2_09749-0.7 on SLES10 for
x86, when
the initrd-xen file was loaded. On console, various messages about "No space
left on device"
appears later that the "/dev" was monted on a tmpfs filesystem (for udev).
The only sollution for this problem at that moment, was remove the
"dom0_mem=192M" and the
2006 Nov 29
1
TCP checksum change in RPC replies within XEN, NFS lockup (SLES10)
Hello,
my apologies for not being sure whom to tell this problem, but it is very strange.
Let me tell the story:
I''m using XEN (3.0.2) with SLES10 (x86_64, SunFire X4100). On one machine I have
three virtual machines ("DomU") that are very identically configured (SLES10
x86_64 also). There is also a SLES9 (i386) acting as a multi-homed NFS server.
I can mount and access a
2007 Mar 15
15
dom0 networking disabled
Hi folks, I''ve been trying to work out this situation for a few days now
without much success and dug all over the archives for similar issues,
none of which seem to relate exactly.
I installed Debian Etch and the Xen (3.03) kernels / binaries on a Dell
server. It works fantastic with all the default configurations with one
strange flaw - as soon as the /etc/xen/scripts/network-bridge
2006 Mar 05
1
network bridge empty
My very first xen DomU can not ping anything on my network. Well that is
not entirely true, it can ping itself. I did not touch any of the
scripts in /etc/xen so xen should be using bridging. My pc is running
xen-unstable and uses a 3Com PCI 3c905B
Just after the ''xen start'' on Dom0 brctl shows:
bash-3.00# brctl show xenbr0
bridge name bridge id STP