similar to: No eth0 in DomU in FC5

Hello, I am trying to run Xen 3 on FC5, but I cannot have the eth0 interface appear in domU. I have 3 servers running FC3 and Xen 2 with various domUs since a year. Everything is fine on that front. I took one of the server, upgraded it to FC5 and did the following: - yum install xen kernel-xen0 kernel-xenU - grub.conf contains title Fedora Core (2.6.15-1.2054_FC5xen0 root (hd0,0) kernel

Just installed Xen 3 on FC5 that all went smooth following: http://www.fedoraproject.org/wiki/FedoraXenQuickstart I want to however create a FC4 virtual machine - I attepmpted to use the image at: http://jailtime.org but it doesnt seem to work (networking fail, most else works great) -- I am thinking that it is because those are for Xen 2 (??) So, is there another place to get images for Xen 3?

Hi, I've revisited compiz on aiglx and at this point, if you're running rawhide (fedora development), it's a matter of installing the i386 RPM found here: http://people.redhat.com/krh/compiz/ There's a SRPM there too for other architectures, rebuild using rpmbuild --rebuild compiz-0.0.13.fedora1-3.src.rpm To run compiz, first start the gnome-window-decorator process in

Hi all, I have recently installed FC5 along with xen via yum. I''ve successfully rebooted using the dom0 (2.6.16-1.2133_FC5) kernel, started xend, and trying to start my first domU after following the instructions in the user guide. However, I keep receiving a kernel panic and an error about XENBUS timeout. Any help greatly appreciated as I am stumped. Should I be using the provided

Hi, im using a fedora core 8 domU and fedora core 8 as my dom0 on xen3.1.0-13, my config file reads: kernel = "/boot/vmlinuz-2.6.21-2950.fc8xen" ramdisk="/boot/initrd-2.6.21-2950.fc8xen-no-scsi.img" memory = 428 name = "fedora1.fc8" vif = [ ''mac=00:16:3e:00:00:03,ip=192.168.2.105'' ] dhcp = "off" netmask = "255.255.255.0" gateway

Hello, Will "R" work on this 64 bit machine?, Here are the specs. of our linux box: *Red Hat Enterprise Linux WS (v.3 Standard for AMD64 and Intel EM64T) *OS: redhat-release Release: 3WS CPU Arch: ia32e-redhat-linux (4) GenuineIntel Intel(R) Xeon(TM) CPU 3.40GHz 3399 MHZ Arch: EM64T Cache: 1024 KB Vendor: GenuineIntel Memory: 2000 MB Stepping: 1 Family: 15 Swap: 4000

I followed the book called "Professional Xen Virtualization" written by William von Hagen,and published by Wiley Publishing,Inc. Here are some configuration files: #cat /xen/ubuntu/ubuntu.xen3.cfg kernel = "/boot/vmlinuz-2.6.18-128.1.16.el5xen" ramdisk = "/boot/initrd-2.6.18-128.1.16.el5xen-no-scsi.img" memory = "512" name = "Ubuntu804" vif =

I''ve been running any number of CentOS 4 based Xen hosts and guests using CentOS 4.4, and the Xen RPM''s from www.xensource.com, and various hand-built OS images using jailtime and my own own OS images. I like the jailtime approach: One partition for / on the DomU, /dev/sda1, built as a local file or local LVM partition One partiton for swap on the DomU, /dev/sda2,

Hi All, I need help getting my jailtime centos 5.1 network going on my dom0 ubuntu feisty with domU centos5.1. I do this: ifconfig eth0 192.168.0.14 netmask 255.255.255.0 up I can then ping myself. When I try to ping another ip like on the host or other servers I get: ping 192.168.0.110 PING 192.168.0.110 (192.168.0.110) 56(84) bytes of data. >From 192.168.0.14 icmp_seq=2 Destination Host

I have been testing out my new MGE Nova 1100 on a system (dual Athlon) running Fedora Core 5 and the newhidups driver seems to be regularly dying. The UPS is the USB model, I have nut-2.0.3-0.1.fc5 and nut-cgi-2.0.3-0.1.fc5 installed. I am running a 2.6.16 kernel. (I haven't upgraded to FC5's 2.6.17 kernel yet as there seem to be some complaints about it.) The driver initially works.

Just installed fc5, installed correct kernel source, and trying to compile zaptel-1.2. Changed the link in /lib/modules/2.6.15-1.2054_FC5 to point to /usr/src/redhat/SOURCES. Like: lrwxrwxrwx 1 root root 23 May 12 15:21 build -> /usr/src/redhat/SOURCES A 'make install' still complains with: make -C /lib/modules/2.6.15-1.2054_FC5/build SUBDIRS=/usr/src/zaptel-1.2 modules make[1]:

I just upgraded my Fedora Core 5 Xen server from 1 gig or memory to 2. When I start the machine it begins to load the Xen kernel and then reboots. I can boot the machine on straight FC5 without Xen. If I put it back to 1 gig of memory Xen will boot fine. I looked in the xend.log and didn''t see anything. I do see some kind of page_fault error on the screen before the server reboots.

Hi all, I have a problem with a CentOS 4 and now updated to 4.1 server, every so often the other servers try to contact it and this not there a retry and it is, like it goes to sleep, I have no problem with the fedora1, RH9 and slackware machines they just never do this. its most annoying.. they all use IP's not names. all access lists are identical, all hosts files are identical, all

With Centos3, fedora1/2 I have been able to put /boot on a RAID1 partition and have it boot normally. Unlike earlier versions that used lilo as the default boot loader, these did not make the 2nd drive bootable but at least I was fairly confident that if the first drive failed I could use the install CD in rescue mode to fix up the 2nd one and go on. However, Centos4 won't boot at all with

Hello, i will describe my approach 1) I have downloaded Centos5-64bit xen image from jailtime.org 2) I have created own swap image with 512MB file size 3) I have used same as dom0 kernel 2.6.18-53.1.19.el5xen 4) I have mounted my image file and copied /lib/modules/2.6.18-53.1.19.el5xen 5) I have created custom ramdisk for domU with mkinitrd --with=xennet --preload=xenblk

Hello All, Ive searched the arqchives, but didnt find anything like this.. Maybe im missing some trick here... The problem: I've instaled snmpd and snmp-utils packages with yum. Im using and old simple .conf file, i've been using on my fedora 1 box, but when I try to start snmpd, it just says OK, (Starting snmpd..........[OK]), but the service dont work at all. I dont see any process

Hello, we run samba 3.0.14a on FreeBSD. We recently upgraded our linux clients from FC2 to FC5. Now smbpasswd (on the client) does not work. We get the following error: "cli_pipe_validate_current_pdu: RPC fault code NT code 0x1c010002 received from remote machine sambaserver pipe \samr fnum 0x70f3! machine sambaserver rejected the password change: Error was : NT code 0x1c010002. Failed

Hello, I am a biostats student and a newbie to R. I have a question about 32-bit vs. 64-bit. I am running FC5 on a AMD 3800+ with 2GB Ram. With 64-bit, I am running into some issues the stability of FC5. A friend suggested I ditch the 64-bit version of FC5 for the 32-bit. I do not currently have any pressing needs for the capabilities of the 64-bit OS. Before I reinstall the 32-bit

Are there any generic install guidelines for compiling the Zaptel drivers on FC5? This is my first install of Asterisk (and my first FC5 system) and I'm having a great deal of trouble getting it to cooperate. make clean and make are definitely not playing nice, telling me that "You don't appear to have the kernel sources installed" when I'm pretty sure that I do. Any

Wine .12 on fc5 does not build well. .configure shows several dependancies missing. Can anyone identify the packages that sypply the following: xorg-x11-devel _popen, _pclose, lwp_create mingw32-dlltool Thanks, Dan