similar to: Oppinions about Thunder K8HM

I have a Tyan Thunder K8HM (S3892) motherboard and I am trying to get lm_sensors to work with it. The problem is that I am getting conflicting information. The source for lm_sensors says not to compile the modules for the 2.6 kernel. The information from Tyan says that I need to compile the modules if my kernel is less than 2.6.12. Has anyone here configured lm_sensors for this motherboard?

I am planning to build a server based on the SuperMicro X7DBE+-O motherboard. This server will have two dual-core Xeon processors and a 3ware 9550SX raid card. Has anyone built a server based on this motherboard? Are there any issues with the smp/dual-core support in CentOS4 that might cause problems? I appreciate any input. I'm just looking to find out about any possible problems before

Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His

I've been checking out this and like the looks of it. http://www.tyan.com/products/html/gt24b2891.html I was told the onboard SATA RAID controller can only be used by windows. However, others have told me that there is no problem using it with linux. Anyone used the Tyan Transport GT24 (TYAN Thunder K8SRE s2891 motherboard)? Good choice for a CentOS server? Thanks, Josh

Hi, I'm trying to install 5.1 using the onboard LSI Symbios 53C1010, and I'm running into some trouble. When the computer first boots, the SCSI BIOS sees the three HDDs, but when I go to install, the installer hangs for a while at inserting the sym53c8xx driver and if I go over to the screen on F4 it shows that it is trying to scan the SCSI bus and is resetting all of the IDs. Once that

https://bugs.freedesktop.org/show_bug.cgi?id=87934 Bug ID: 87934 Summary: nouveau errors on archlinux while running War Thunder native (not via steam) Product: Mesa Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium

I had my eye on the Tyan dual-Opteron mobos for awhile. I tried to find a posting *anywhere* sharing experiences with these boards under Linux. No such luck. So placing myself under the heading "Where Angles Fear to Tread," I went ahead and built a system anyway. Here's what I've learned. The specs: Tyan Thunder K8SE S2892, BIOS 1.01 2x Opteron 270, 2Ghz Dual-Core, retail

I have a server that frequently hangs while rebooting. I see no errors, but during the boot process it stops at this stage: Initializing hardware... storage network audio The cursor sits just after the word "audio" and I have to do a hard reset to get out of it. This server has no audio capabilities, so I am thinking that I just need to disable the audio stuff so it doesn't

I was wondering if there's any non-executable stack patch for FreeBSD's kernel. I searched in google but all I got was some questions in freebsd-security back from 2001 and an answer saying someone heard about a project like this, but no information at all. Is there any patch like PaX or Openwall available for FreeBSD? I dont want to discuss if its useless or not since there're a

Hi everyone, I'm going to install an IAXy in my client's office but there the internet conection has a private IP address, however the Asterisk server has a public IP. Private IP Public IP (IAXy)--------(ISP LAN)-----------((Internet))-----(Asterisk Server) This setup can cause any problems to the comunication process? I'm aware that

Hi all, I''m putting together a OpenSolaris ZFS-based system and need help picking hardware. I''m thinking about using this 26-disk case: [FYI: 2-disk RAID1 for the OS & 4*(4+2) RAIDZ2 for SAN] http://rackmountpro.com/productpage.php?prodid=2418 Regarding the mobo, cpus, and memory - I searched goggle and the ZFS site and all I came up with so far is that, for a

Hi all, I''m putting together a OpenSolaris ZFS-based system and need help picking hardware. I''m thinking about using this 26-disk case: [FYI: 2-disk RAID1 for the OS & 4*(4+2) RAIDZ2 for SAN] http://rackmountpro.com/productpage.php?prodid=2418 Regarding the mobo, cpus, and memory - I searched goggle and the ZFS site and all I came up with so far is that, for a

I have two identical servers. The only difference is that the first one has Maxtor 250G drives and the second one has Seagate 320G drives. OS: CentOS-4.4 (fully patched) CPU: dual Opteron 280 Memory: 16GB Raid card: 3ware 9550Sx-8LP Raid volume: 4-disk Raid 5 with NCQ and Write Cache enabled On the first server I have decent performance. Nothing spectacular, but good enough. The second one

I have two identical servers. The only difference is that the first one has Maxtor 250G drives and the second one has Seagate 320G drives. OS: CentOS-4.4 (fully patched) CPU: dual Opteron 280 Memory: 16GB Raid card: 3ware 9550Sx-8LP Raid volume: 4-disk Raid 5 with NCQ and Write Cache enabled On the first server I have decent performance. Nothing spectacular, but good enough. The second one

Dear list, as my Xen3 server is finaly becomming ready for production I was wondering if anyone has written a xen usage monitoring/logging tool? Something like xm top, but with continuose logging to a (rr)database. Or a munin plugin? I can''t remember seeing anything simmilar on the list. BTW: where does xm top get the NETTX(k) and NETRX(k) from? For a munin plugin I''d

Hi! I scanned for relevant topics in the last two years but except for putting a swap file on compress=lzo this march I didn´t found anything. Does compression make sense on SSD? Or more specifically: 1) In what chunk sizes does BTRFS compress? How much data is affected when a byte is changed in a 2 GB file or so? Can compression cause more writes to the SSD in extreme circumstances? 2) It

Hi, I'm little unhappy that OpenSSH server forwards connections while running as root. Services what checks out using ident protocol complains about me working as root [and for a good reason]. To change situation I see following ways: 1) for every port forwarding fork();setuid();forward|exec(netcat) 2) after authentication grab one pty;setuid();forward connections as requested [is there

As some of you R-devel readers may know, the plot() method for "lm" objects is based in large parts on contributions by John Maindonald, subsequently "massaged" by me and other R-core members. In the statistics litterature on applied regression, people have had diverse oppinions on what (and how many!) plots should be used for goodness-of-fit / residual diagnostics, and to my

In R and S, the general idea is that data.frames must have unique row.names (aka dimnames(.)[[1]]). Several observations / problems (in R *and* S !). [Example code at the end] 1) Both in S and R, data.frame(..) (and e.g., also cbind(<data.frame>, ..) which dispatches to data.frame()) silently drops the whole row.names and replaces it by "1" "2" ...

Hi all. I've been reading through Wi-Ki and at the extensions.conf file description (http://www.voip-info.org/wiki-Asterisk+config+extensions.conf) The author says this: "One day, someone is going to write a proper scripting language for Asterisk that can understand a simpler, easier (and more traditional) scripting syntax. All it would need to do is translate the "high