similar to: Dom0 searching for NFS root

I have a CentOS 5.6 system (recently installed) that, for some reason, has decided to mangle one of its drives, specifically /dev/hde1 ... No errors anywhere, just rebooted the machine over the weekend and it's gone. Up till the reboot, the drive was fine, I was writing to it without a problem. fdisk tells me: ---------- # fdisk -l /dev/hde Disk /dev/hde: 160.0 GB, 160041885696

Hello, My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I noticed on the log that suddenly we are getting messages such as : Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 247 to 246 Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance

Hiya, I'm new to Centos but learning rapidly but I have been using FreeBSD. I'm trying to setup a HA NFS server using 2 machines. Both machines are running 4.3 updated to the latest via Yum. I did yum groupinstall drbd-heartbeat and yum install kernel-module-drbd-kernel-module-drbd-2.6.9-34.EL to match my kernel. The problem I have is that on 1 machine drbd works fine, but when I start

OK, been perusing the archives and Google, but can't find what I want. I'm building up a 512 MB compact flash using the CLFS directions to build the filesystem. That works great, but I would like to use extlinux to make the cflash bootable on my little SBC. However, to date, no dice. Attached is my extlinux.conf file and the steps I have used to make this work. Initially I tried to

On Monday 14 March 2005 06:29 pm, Mark Williamson wrote: > > I don''t know if this is the right place to post, but I can''t find any > > info about my problem on the net. > > Yes, this is the right place. > > > title Xen2610 > > kernel /boot/xen.gz dom0_mem=131072 console=vga > > module /boot/vmlinuz-2.6.10-xen0 root=/dev/hde1 ro console=tty0

Yesterday i was copying a few dump files (backups) about 1GB in size from my centOS 3.4, on a samba share, to my windows, when the centOS box stopped responding. The HDD LED was on and after I connected a monitor all I could see was this error message over and over again: "usb-uhci.c: host controller halted, trying to restart" I wasn't able to login or anything, so I saw no other

OK, I have managed to get software RAID 1 running on my wonderful Proliant server but now have two challenges: 1) Fresh after an OS install and reboot, the RAID array starts to do its stuff but straight away (as part of the boot messages) I am told that the second disk is 'not ready for command' and the system hangs as soon as resyncing starts. I think this is fixed by adding an hdparm

Hi List, I run XEN 2 since some month (unfortunatly installed by a fiend of mine). Recently I bought some new hardware and tried to get XEN 3 running on a Debian Sarge 3.1. I installed via the Debian installer a RAID 1 with LVM. even though there are some devfs_mk_dir errors systems comes up. Now I installed XEN but system doe not boot as the boot device seems not to be recocnized by the

I burned a DVD for CentOS 4.1. I booted from it and everything went fine for the graphical screen installation. I choose separate partitions for my /boot (hde6), / (hde9), and swap (hde12) areas. My /boot partition was ext2 and my / partition was ext3. I installed grub in my /boot partition successfully. I have a Boot Loader, System Commander 8.13 which controls the MBR. The installation then

Hi, Apologies, this is going to be quite long - I'm going to provide as much info as possible. I'm running a system with ext3 fs on software RAID. The RAID set-up is as shown below: jlm@nijinsky:~$ cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid5] read_ahead 1024 sectors md0 : active raid1 hdc1[1] hda1[0] 96256 blocks [2/2] [UU] md5 : active raid1 hdk1[1] hde1[0]

My LAN includes a server machine running FC4, with several shares mounted with Samba. Yesterday, I upgraded the packages on the FC4 machine, and these included Samba, which is now at 3.0.23a. Unfortunately, this seems to have broken the mounted shares for my Ubuntu 6.06 installation on my Acer 1682WLMI laptop. The cifs module on Ubuntu reports as version 1.39. The symptoms are that I can

Hi, Is CentOS good for a desktop machine? I have been using Fedora but the whole GNOME 3 debacle has me scrambling for something else. I have a few "minimal" CentOS servers but does anyone here use CentOS on their laptop? Does wireless and suspend work ok? Are there packages for the usual desktop stuff like libreoffice, sylpheed and so on? Machine is Toshiba Portege R935. It's

Hello again. Working to put Centos 5 on my old Toshiba Portege 3490ct (256Mb memory). PCMCIA CDrom and Lan card. Using 'linux askmethod' to be able to install off of my FTP server (have done 4 PC installs so far off that server successfully) It's video card is: S3 86C270-294 Savage IX/MV After recognizing the video card I get the message about no graphical install available.

Hi, Does Xen HVM support the the "disk" option that can attach a FAT partion or a floppy image like the qemu? In qemu, we can do it with the option "-hda fat:/root/tmp/" and "-fda /root/floopy.img". Any reply is appreciated. Thanks, Bei Guan _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

Hi Andre, ext3 folk, It would be really great if you could help me out here, I'm not sure if this is a hardware issue, a driver issue, an ext3 issue or some combination of them... I have a KT133A motherboard with an on-board promise controller, and an ACARD ATP865 in a PCI slot. I'm running 2.4.19-ac4 with the lvm 1.0.5 patches. The acard has two drives, hde and hdg attached to it, both

Hi, This issue only happens on my IA32E VMX domain. IA32 VMX domain is okay. I am trying VBD disk in IA32E VMX domain. I used following disk configuration to create an IA32E VMX domain. disk = [ ''file:/mnt/disk1.img,hda,w'', ''file:/mnt/disk2.img,hde,w'' ] After creating VMX, its keyboard can not be used properly. For example, if pressing

how can I configure for shaping bandwith using cbq/htb without delay or latency?

Hello, a system here stopped because it had a hardware problem. We rebooted it and have now the following problem: The data disk /dev/hde1 is formatted as ext3. Obviously one of the inodes is bad and we get a lot of lines: Truncating prphaned inode 8863987 (uid=0, gid=0, mode=0100644, size=742) when running fsck. These lines have always the same values (inode, mode, ... are equal) and ar enow

Hi - this is more of an FYI than anything else; I think I have alternative ways of installing. pxelinux loads quite happily on the Portege 2000, with boot agent 4.0.18, but when attempting to load the kernel (using tftpd-hpa 0.28 (the -2 Debian package, FWIW)), will receive 20 packets and then loop printing 8000. m.

Hello, I had a scientific linux 3.0.4 system (rhel compatible), with 3 ide disks, one for / and two others in linear raid (250 gb and 300 gb each). This system was obsoleted so i move the raid disks to a new scientific linux 3.0.7 installation. However, the raid array was not detected ( I put the disks on the same channels and same master/lsave setup as in the previous setup). In fact